• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.218-223
• /
• 2008

Cell-phone becomes a necessary communication device in modern society. However, a paging signal by a sound transducer often acts as an unpleasant noise, thus necessitating a paging signal by a vibration motor. The conventional flat type vibration motor uses three-phase windings with three phase coils. In this article, a new design of a vibration motor using a V connection with two phase coils is presented, increasing mass productivity. For electromagnetic field analysis, due to the motor symmetry, two-dimensional modeling can be implemented for fast computation, and performance is predicted by the finite element method. The winding distribution angle turns out to be the most important design parameter for the elimination of dead points, and a new coil configuration is suggested which has no adverse effect on motor size and weight. Experimental tests of vibration confirm the validity of the proposed design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.55-57
• /
• 2002

In industry, A pallet truck is drived mainly by d.c motor, because it use to battery for input power. However, d.c motor has a brush, this is the disadvantage of the d.c motor for a pallet truck. Though a brushless d.c motor has a permanent magnet, it is for low torque. Switched reluctance motors(SRM) have the advantage a high torque/weight ratio, as the large reluctance torque is made by salient poles of both start and rotor, and a high reliability, this paper design the shape of the switched reluctance motor that will replace a d.c motor for A pallet truck. First of all, designed parameter of SRM, outer diameter, diameter of rotor and stock length, from the outputr equation considering electric loading and magnetic loading. Next, design diameter of stator and rotor, depth of slot pole width, air gap as inner size of motor. The design of SRM certify the torque, the efficiency and the output power by a simulation.

• 신재생에너지
• /
• 제10권2호
• /
• pp.5-11
• /
• 2014

Squirrel cage induction motor is the main driving system of industrial field and familiar with its use in a large variety of applications. The structure and operating characteristics of induction generator is almost identical to induction motor, but the induction generator part is used restrictively from hydropower power and wind power development etc. Recently induction generator is commonly used for micro & small hydro power applications due to its simplicity, reliability, low cost and robustness. Input and output of induction motor has turned against at the induction generator operation. Rotation speed of induction generator is small faster than synchronous speed of induction motor. As output of induction machines increases with the increasement of speed, so loss is same. Actually, generator efficiency is lower than motor at this condition. If induction generator is connected with mechanical load such as increaser, total efficiency is decreased. Consequently the quality in compliance with an induction motor parameter applying like that in the generator is a possibility of having the error of some. In this paper, we analyzed that input, output, torque and efficiency of induction machine is different from each other above and below synchronous speed.

• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.101-109
• /
• 2008

유도전동기는 회전에 필요한 자계를 유지하기 위해 무효전력을 필요로 한다. 만일 전원측을 대신하여 부하측에서 무효전력이 제공될 경우 역률은 향상될 것이다. 유도전동기의 역률은 대개 낮으므로 커패시터로 보상이 필요하다. 내선규정에서 유도전동기의 역률 보상 커패시터의 용량은 출력에 따라 추천된 값의 설치를 권고하고 있다. 그러나 유도전동기는 같은 출력에서도 회전수에 따라 특성이 달라지므로 역률이 일정하지 않아 용량에 따라 일정한 커패시터의 적용은 부적합하다. 그래서 본 논문에서는 같은 출력조건에서 속도에 따라 기존에 제시된 값과 비교한 결과 역률 보상 커패시터의 용량이 약간 높게 설정되어야 함을 확인하였다.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.75-82
• /
• 2012

Elimination of rotor position sensors mechanically coupled with the rotor shaft is attractive to variable speed drives primarily due to increased system reliability and cost reduction. In this regard, search for a simple and robust position sensorless control has been intensified in past few years specifically for low-cost, high-volume applications such as home appliances. This paper describes a new parameter insensitive position sensorless control for switched reluctance motor (SRM) drives satisfying such a need in this market segment. Two consecutive switch-on times of the controllable switch in hysteresis current control are compared to estimate the rotor position and speed. The proposed sensorless control algorithm is very simple to implement since it does not depend on extensive computation or any additional hardware. In addition, the proposed method is robust in that its dynamic performance is least affected by system parameter variations. The proposed approach is demonstrated on a single-controllable-switch-converter-driven SRM with two-phases that lends itself to a system with low cost and compact packaging which comes close to the intended applications. Analysis and simulation results followed by experimental verification are presented to demonstrate the feasibility of the proposed sensorless control method.

• 전력전자학회논문지
• /
• 제4권1호
• /
• pp.1-12
• /
• 1999

파라미터 변동이나 외란에 강인한 영구자석 동기전동기의 궤환선형화 속도제어기를 설계하고 DSP를 이용하여 실험 시스템을 구현하였다. 시스템의 상태변수에 비하여 매우 느리게 변화하는 파라미터의 추정을 위하여 MRAS를 이용한 추정방법이 MIT rule을 이용하여 유도되었다. 외란이나 시스템의 상태변수 정도의 변화를 보이는 피라미터에 대하여는 그영향이 고려된 준-선형화 비간섭 모델이 유도되었다. 이 모델을 이용하여 제어시스템의 강인성을 얻고자 경계층을 가지는 Sliding mode 제어기를 설계하고 PD 제어기를 적용한 기존의 제어기와 비교하였다. 제안된 제어 방법의 유용성은 Simulation과 DSP에 기반한 실험 시스템을 통하여 검증하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.181-186
• /
• 2002

Laser welding application for car body manufacturing has many advantages in the stiffness and the lightness of vehicle, the productivity of assembly line, and the degree of freedom in design. This presentation will express the innovation of car body manufacturing including parameter optimization, process modeling, and system integration. In this application the investment for systems was cut down dramatically by real time switching over the laser path between two welding stations. Points of technical discussion are as follows: optimization of parameters such as laser power, robot speed and trajectory, compact and useful design of jig & fixture to assure welding quality for 3 sheet-layer zinc-coated steel, system integration between 4kW Nd:YAG laser device and the other systems, on-line real time welding quality monitoring system, perfect safety standards for high power laser, minimization of consumption costs such as arc lamp, protective glass for optic, etc. Laser welding has found a place on Hyundai's production plant in conjunction with the startup of mass production of new sports car, and this production system is the result of a collaboration of its engineers. Outer side sheets are joined to inner side sheets by 122 stitch welds totally. And the length is about 2.4meter.

• 전자공학회논문지SC
• /
• 제49권4호
• /
• pp.61-68
• /
• 2012

본 논문에서는 리니어 컴프레서를 위한 폐루우프 센서리스 스트로크 제어시스템이 구성되었다. 피스톤 위치를 정확히 알아내기 위해 모터 매개변수를 피스톤 위치와 모터 전류의 함수로 추정하였다. 이 매개변수 데이터는 ROM 테이블에 저장한 뒤 차 후 피스톤 위치를 정확히 알아내는데 사용된다. 또한, 추정된 전동기 매개변수의 데이터 크기를 줄이기 위해 여러 형태의 곡면 함수로 근사화 하는 작업을 수행하였고, 공간분할을 통해 추정오차를 줄일 수 있었다. 곡면함수의 차수와 공간분할의 개수가 매개변수의 추정오차와 연산시간에 미치는 영향을 분석하였다.

• 한국정보통신학회논문지
• /
• 제11권6호
• /
• pp.1176-1181
• /
• 2007

본 연구에서는 플랜트의 잡음, 부하, 및 변경된 파라미터를 제어하는 퍼지 PI+퍼지 D제어기 즉, 일종의 강인한 제어 시스템을 고려하고자 한다. 차분 방정식에 대하여 PI+D제어기를 적용하였으며 PI+D제어기의 PID 파라미터에 대응 입력에 대한 퍼지 제어기를 계획하고 따라서 파라미터 변화에 따른 환경 변화에 강인한 제어 시스템을 설계하였다. 퍼지제어는 편리한 4가지 규칙과 멥버쉽 함수를 가지고 있다. 본 연구에서는 3상의 유도 모터 제어에 대하여 퍼지 PI+퍼지 D제어기를 설계하고 그 성능을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.504-507
• /
• 1997

It is well known that Variable Structure Controller(VSC) is robust to parameters variation and disturbance but its performance depends on the design parameters such as switching gain and slope of sliding surface. This paper proposes a more robust VSC that is composed of local VSC's. Each local VSC considers the local system dynamics with narrow parameter variation and disturbance. First we optimize the local VSC's by use of Evolution Strategy, and next we use Artificial Neural Network to generalize the local VSC's and construct the overall VSC in order to cover the whole range of parameter variation and disturbance. Simulation on BLDC motor current control shows that the proposed VSC is superior to the conventional VSC.