• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.695-698
• /
• 1992

When the inverter driven Induction motor is compared with sinusoidal voltage driving, the loss is increased and efficiency in the same output is decreased by the time harmonics in inverter output. These are based on the eddy current on stator and the skin effects of rotor bar current induced from time harmonic. The aim of this paper is to estimate the equivalent circuit parameter of squirrel cage induction motor fed from inverter considering this effects.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.496-501
• /
• 2009

Interior Permanent Magnet Synchronous Motor (IPMSM) produces two kind of torque that Magnetic and Reluctance torque. The permanent magnet linkage flux ${\Psi}_a$ and d-axis and q-axis inductances have an important influence on the torque characteristic of IPMSM. Thus their accurate prediction is essential for predicting performance aspect such as the torque and flux-weakening capabilities. In this paper, the influence of barrier width on the ${\Psi}_a$ and $L_d$, $L_q$ is calculated by FEM analysis. Predictions are validated by comparison the average torques, using Maxwell Stress Tensor method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.713-716
• /
• 2007

In this paper, we consider one of robust control system, fuzzy PI+fuzzy D controller dealing with noise, load, changed parameters of plant. We apply PI+D controller with a design for output of differential function and, we plan fuzzy controller with input for PID parameter of PI+D controller so We design control system meet with the change of environment with robust in relation to change of parameter. Fuzzy control is possessed of easy 4 rules and membership function and We design fuzzy PI+fuzzy D controller. Plant of this paper make a choice of 3 phase induction motor.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.4
• /
• pp.195-202
• /
• 2002

The high performance position controller named 'Unified PID Position Controller'is presented in part 1 of this paper. In part 2, we provide smart gain adjustment methods including the freedom utilizations for rare sensitivity toward the system parameter variation and for increasing the stiffness of the system. Owing to the provided gain tuning strategy, the overall system characteristics can be stabilized without over-shoot phenomena when the system parameter is changed in the rate of from 0.5 to 2∼4. Moreover, for the actual feasibility to the industrial fields, a simple butt effective anti-windup strategy prohibiting the integral component of the PID position controller from saturation is presented too. All of the presented algorithms are verified through the experiment works with commercial linear motor.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.6
• /
• pp.719-727
• /
• 1999

A robust position control method of the BLDC motor using a new sliding mode control strategy is presented. The main property of variable structure system(VSS) is that the system response is robust and insensitive to parameter variations and external disturbances in the sliding mode. When using the conventional VSS, generally the reaching phase problem occurs, which cause the system response to be sensitive to parameter variations and external disturbances. Furthermore, the speed of response is relatively slow because the swithching surface is a linear function. In order to overcome these problems, VSS with nonlinear sliding surface eliminating reaching phase is proposed. The validity of the proposed scheme is shown by results of simulations of simulations and experiments for the BLDC motor with variable load.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.552-559
• /
• 2000

Most of the sensorless vector control methods use the equivalent circuit of induction motors. Therefore parameter auto-measurement of drive motor is essential function in commercial sensorless vector control inverters. The accuracy of motor parameter measurement greatly affects the performance of sensorless vector control. In this paper limitations of conventional measurement methods are examined, and new measurement methods are proposed to solve those limitations.

• Journal of Korean Society for Quality Management
• /
• v.19 no.2
• /
• pp.63-77
• /
• 1991

Currently the problem of air pollution caused by the motor vehicle emission is one of the most serious problems to be solved. Thus we needed the inspection method and technical innovation constraining the motor vehicle emission. In order to establish the more reasonable certified test, the multivariate sequential rectifying inspection plan designed in this paper has been applied to the domestic vehicles by analyzing the statistic characteristics of the emission distribution. This inspection method is designed to satisfy the evaluation measure constraining domestic vehicle emission, and it serves the defect rectifying system and performance certification of catalytic converts. As the prior parameter for the domestic vehicles, we used the data for the catalytic converts which passed the certified test excuted by the EPK. For the case of engine test, we used those data which passed the certified test of domestic vehicles. The multivariate sequential rectifying inspection plan of the vector parameter is able to minimize the average sample number and increase the pass probability of operating characteristic curve.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.958-960
• /
• 1998

This paper presents an application of power system stabilizer for a 5Kw Motor-Generator Set. The power system which was consisted of 5Kw Motor-Generator Set. Excitation system, Governor system and PSS was used for the performance test. The method by changing the PSS gain to allocate properly pole-zero positions was used for setting PSS parameter value. The result of the experiment was satisfactory.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.723-725
• /
• 2000

This paper presents a parameter identification method to estimate the stator resistance. stator inductance, rotor resistance and rotor inductance of the induction motor. A step voltage is applied across the stator terminals while the machine is in the standstill condition, and the resulting stator voltage and current response are measured. Observer/Kalman Filter Identification(OKID) algorithm is used to estimate induction motor parameters. Simulation results are presented to verify the identified model.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.276-281
• /
• 2010

The switched reluctance motor (SRM) is an older member of the electric machines family. Its simple structure, ruggedness and inexpensive manufacturing potential make it extremely attractive for industrial applications. However, these merits are overshadowed by its inherent high torque ripple, acoustic noise and difficulty to control. In this paper, a control strategy of the angle position control for the SRM drive based on fuzzy logic is illustrated. The input control parameter, the output control parameter and fuzzy control with FAM table formulation strategy are described and simulated with control patterns, and the decision form of the fuzzy control is illustrated and simulated, and the scope of implementing in a Fuzzy based ASIC chip is enlightened with literature support.