• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.63-69
• /
• 2011

Hull forms for catamaran type small fishing boat powered by electric motor are newly developed by experimental approaches. Model tests for two hull forms having different length are made at circulating water channel. Resistance performance and wave patterns are compared to carry out an analysis of the effect of extension of main body. The results show that the extension of main body can give better resistance performance above a certain velocity.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.5
• /
• pp.487-495
• /
• 2016

In the offshore project such as semi-submersible FPU and FPSO, the free fall type life boat called TEMPSC (Totally Enclosed Motor Propelled Survival Craft) has been installed for the use of an emergency evacuation of POB (People on Board) from the topside platform. For the design of life boat arrangement for semi-submersible FPU in the initial design stage, the drop height and launch angle are required fulfill with the limitation of classification society rule and Company requirement, including type of approval as applicable when intact and damage condition of the platform. In this paper, we have been performed the numerical studies to find proper arrangement for the life boats consider drop height in various environmental conditions such as wave, wind and current. In the calculations, the contributions from static and low frequency (LF) motions are considered from the hydrodynamic and mooring analysis as well as damage angle from the intact and damage stability analysis. Also, Air-gap calculation at the life boat positions has been carried out to check the effect on the life boat arrangement. The air-gap assessment is based on the extreme air-gap method includes the effect of 1st order wave frequency (WF) motions, 2nd order low frequency roll/pitch motion, static trim/heel and set down.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.97-102
• /
• 2015

The long line fishing machine is combined with motor and two disc rollers has used on the small size fishing-boat under 1 ton located in near Jeollanam-do seaside. The long line fishing motor is controlled only one direction because the fishing line is loaded heavily at pulling up. On this paper we made the long line fishing 400W power motor controller which it was usually applied under 1 ton fishing boat, and designed the controller using PWM chip, Half bridge driver and MOSFET for one direction motor control. Furthermore some user convenience devices were added like battery indicator and safety protection circuit for battery overdischarge and battery source wire mismatch connection. So we protected the battery from overdicharging when the battery voltage was below 11.5V and fishermen didn't need to worry about source lines misconnection anymore. We confirmed the test version of controller was the good working condition at land and sea.

• Journal of the Speleological Society of Korea
• /
• no.65
• /
• pp.39-51
• /
• 2004

To introduce the typical water caves of the northeastern district in China, the Shenyang Water Cave located in the Shenyang city and the Benxi Water Cave located in the Benxi city of the Liaoning province of the northeastern part of China are presented. The caves are very big and long, and the water flows in the cave to drive the motor boat for tourist watching the beautiful sight in the caves through the year. The geological information and the beautiful internal sight of views in the caves are introduced.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.392-393
• /
• 2019

본 논문에서는 전기 보트 추진을 위한 SPMSM(Surface mounted Permanent Magnet Synchronous Motor) 구동 시스템을 개발하였다. 전차원 폐루프 관측기를 이용하여 외란 토크 관측기를 구성하고, 관측된 외란 성분을 속도 제어기 출력에 보상하여 속도 제어 성능을 향상시켰다. 리튬이온 배터리, 인버터 및 1kW SPMSM으로 구성된 전기 보트 추진 시스템을 이용한 구동 실험을 통해 추진용 전동기의 속도 제어 특성을 확인하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.3
• /
• pp.229-234
• /
• 2007

Currently offshore fisheries are one of shrinking industries and fishermen are getting older. Moreover it is difficult to work fisheries for decreasing fishermen as the time goes. Two people per a boat work together at least for proper fisheries. If the unskilled fisherman boards on boat, it will make some troubles to speak each other and diminish the efficiency of working because one person should control the boat. So it need to study the remote control system for leasure and outboard engine that can control and work at the same time. The remote control system is consisted of engine, steering gear and forward reverse neutral gear controls. These three controls are made by position and speed control using DC motor, and microcontroller is used to control the engine speed and rudder angle. This system can be controled and worked alone and we tested the system at sea and confirmed that the system works properly.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.6
• /
• pp.109-114
• /
• 2011

Manufacturing process of plugs is firstly performed in the making of FRP yacht so it is an essential process for making original form. In the developed countries, it has been useful to manufacture structures of streamlined forms or complex forms, which have been difficult to manufacture due to limits of the traditional hand-made technology, by introducing 5-axis machining technology. In this study, the factors that affect most in the machining were found by using Taguchi Method in order to select the optimized machining conditions for 5-axis machines, and the ways to improve the surface roughness of machined products by applying those factors.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.605-613
• /
• 2014

The purpose of this study is studying the relationship among experience choice, experience effect and experience satisfaction of marine leisure sports for the vitalization of marine leisure tourism. After preparing a questionnaire, investigation and analysis were done by visiting Boryeong area. The result of the study is as following. First, it was found that the major cause of choice in marine leisure sports has positive impact on choice satisfaction. Second, it was found that the major cause of choice has positive impact on experience effect. Third, it was found that the choice satisfaction in marine leisure sports has positive impact on experience effect. Fourth, it wa s found that the marine leisure sports visitors like motor boat, banana boat and yacht experience. Fifth, it is suggested that an equipment rental desk, safety facilities and marine leisure experience facility included in a marine leisure experience center to be built.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2021

In recent years, the importance of environmental regulations is increasing in the shipping industry, and the demands of the industry for this are rapidly increasing. Accordingly, the demand of ship owners is increasing as the shaft generator is a technology that responds to environmental regulations that can be applied to ships the fastest. The shaft generator is a device that can increase the fuel consumption rate of the main propulsion engine by installing an electric motor in the main propulsion engine and using it variably according to the load environment. It operates by the power of the motor at low speeds, and when a sudden load is required, the main propulsion engine and motor operate together, enabling efficient operation. In this paper, the diesel engine and shaft generator of a tug boat are modeled using MATLAB Simulink, and the fuel consumption rate is verified through simulation.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.71-74
• /
• 2006

Currently offshore fisheries are one of shrinking industries and fishermen are getting older. Moreover it is difficult to work fisheries for decreasing fishermen as the time goes. Two people per a boat work together at least for proper fisheries. If the unskilled fisherman boards on boat, it will make some troubles to speak each other and diminish the efficiency of working because one person should control the boat. So it need to study the remote control system for leasure and outboard engine that can control and work at the same time. The remote control system is consisted of engine revolution, steering gear and forward reverse neutral gear controls. These three controls are made by position and speed control using DC motor, and microprocessor is used to communicate and control the engine speed This system can be controled and worked alone and we tested the system at sea and confirmed that the system works properly.