• 감성과학
• /
• 제20권1호
• /
• pp.17-30
• /
• 2017

하이테크놀로지를 여러 가지 다른 영역과 융합하고자 하는 노력이 다양한 연구 분야에서 시도되고 있으며, 스포츠웨어를 개발함에 있어 운동선수의 운동능력을 향상시키기 위한 분야에 이러한 첨단 기술들이 도입되고 있다. 본 연구는 스포츠 훈련에 도움이 되는 동작 센싱 스마트 스포츠웨어를 개발하기 위한 기초 연구로서, 조정 동작 시 관절의 움직임을 측정할 수 있는 동작 센서를 부착하기 위한 인체상의 최적 위치를 탐색하는 것을 목적으로 한다. 본 연구에서는 일관된 동작을 반복적으로 수행할때 관절의 변화가 큰 조정을 대상 스포츠로 선정하였으며, 조정 선수의 대표 체급인 중량급과 경량급의 피험자를 선정하여 동작에 따른 피부의 변화율을 측정하여 체급별 차이를 분석하였다. 먼저, 3차원 모션캡처 시스템을 이용하여 조정 동작 시 등, 팔꿈치, 엉덩이, 무릎 부위의 피부 변화를 촬영하고, 각 마커 간 거리의 변화율을 분석함으로써 체급에 따른 차이를 보이지 않으면서 동작에 따라 피부의 변화가 큰 부분을 인체 상에 도시하였다. 이를 바탕으로 동작 센싱용 스마트 스포츠웨어를 위한 센서 부착의 가이드라인을 제시하였다.

• 대한조선학회논문집
• /
• 제50권2호
• /
• pp.79-87
• /
• 2013

In this paper, an Euler equation solver based on a Cartesian-grid method and non-uniform staggered grid system is applied to predict the ship motion response and added resistance in waves. Water, air, and solid domains are identified by a volume-fraction function for each phase and in each cell. For capturing the interface between air and water, the tangent of hyperbola for interface capturing (THINC) scheme is used with a weighed line interface calculation (WLIC) method. The volume fraction of solid body embedded in a Cartesian-grid system is calculated by a level-set based algorithm, and the body boundary condition is imposed by volume weighted formula. Added resistance is calculated by direct pressure integration on the ship surface. Numerical simulations for a Wigley III hull and an S175 containership in regular waves have been carried out to validate the newly developed code, and the ship motion responses and added resistances are compared with experimental data. For S175 containership, grid convergence test has been conducted to investigate the sensitivity of grid spacing on the motion responses and added resistances.

• 한국컴퓨터정보학회논문지
• /
• 제12권1호
• /
• pp.25-32
• /
• 2007

본 논문은 다양한 모션캡처 하드웨어 장비에 독립적인 응용 프로그램을 작성할 수 있도록 단일화된 추상 레이어를 설계하고 구현하였다. 설계한 추상레이어의 기능을 테스트하고 검증하기 위하여 광학식 모션캡처 시스템과 기계식 모션 캡처 시스템을 각각 AOA 파일과 BVH 파일을 이용하여 에뮬레이션 하였다. 응용 프로그램에서 추상레이어 함수의 호출에 의해 광학식 및 기계식 모션캡처 시스템을 각각 구동하고 시간에 따른 프레임 데이터를 Direct3D를 이용하여 애니메이션 하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 춘계학술대회
• /
• pp.98-100
• /
• 2019

In the past, there were several researchers investigating waves generated by a small boat. Wave generated by a ship can be divided into two distinct systems of waves, such as transverse and diverging waves. It is necessary to understand the behavior of a ship in waves generated by a small boat near port in the view point of ship safety. In this study, the motion of moored floater in waves generated by a small boat near port is investigated. The model test is performed in waves in a square tank in Changwon National University (CWNU). IMU and optical-based system which uses the technique of recording and capturing attitude with respect time are used for measuring 6DOF motion of the moored floater. In addition, tension gauges are used to measure the tension of mooring lines. The effect of waves generated by a small boat on motion of the moored floater near port is investigated through performing the model test in various wave directions of virtually but reasonably assumed wave scenarios.

• KSTLE International Journal
• /
• 제8권1호
• /
• pp.16-20
• /
• 2007

This study introduces a new approach to a falling ball viscometer by using a high speed motion camera to measure the viscosity of both Newtonian and non-Newtonian fluids from the velocity-time data. This method involves capturing continuous photographs of the entire falling motion of the ball as the ball accelerates from the rest to the terminal velocity state. The velocity of a falling ball was determined from the distance traversed by the ball by examining video tape frame by frame using the marked graduations on the surface of the cylinder. Each frame was pre-set at 0.01. Glycerin 74% was used for Newtonian solution, while aqueous solutions of Polyacrylamide and Carboxymethyl Cellulose were for non-Newtonian solutions. The experimental viscosity data were in good agreements with the results obtained from a rotating Brookfield viscometer.

• 제어로봇시스템학회논문지
• /
• 제13권1호
• /
• pp.33-38
• /
• 2007

In this paper, hardware implementation of interface and control between two robots, the master and the slave robot, are designed. The master robot is the motion capturing device that captures motions of the human operator who wears it. The slave robot is the corresponding humanoid robot arms. Captured motions from the master robot are transferred to the slave robot to follow after the master. All hardware designs such as PID controllers, communications between the master robot, encoder counters, and PWM generators are embedded on a single FPGA chip. Experimental studies are conducted to demonstrate the performance of the FPGA controller design.

• 센서학회지
• /
• 제28권1호
• /
• pp.30-35
• /
• 2019

Inertial measurement units (IMUs) are widely used for wearable motion-capturing systems in the fields of biomechanics and robotics. When the IMUs are combined with optical motion sensors (hereafter, OPTs) for their complementary capabilities, it is necessary to align the coordinate system orientations between the IMU and OPT. In this study, we compare the application of two coordinate transformation-based orientation alignment methods between two coordinate systems. The first method (M1) applies angular velocity coordinate transformation, while the other method (M2) applies gyroscopic angle coordinate transformation. In M1 and M2, the angular velocities and angles, respectively, are acquired during random movement for a least-square algorithm to determine the alignment matrix between the two coordinate systems. The performance of each method is evaluated under various conditions according to the type of motion during measurement, number of data points, amount of noise, and the alignment matrix. The results show that M1 is free from drift errors, while drift errors are present in most cases where M2 is applied. Thus, this study indicates that M1 has a far superior performance than M2 for the alignment of IMU and OPT coordinate systems for motion analysis.

• 전기전자학회논문지
• /
• 제23권4호
• /
• pp.1295-1301
• /
• 2019

본 논문에서는 어텐션 기법을 적용한 양방향 순환신경망을 이용하여 새로운 휴먼 모션 디노이징 방법을 제안한다. 본 방법을 이용하면, 단일 3D 깊이 센서 카메라에서 캡처된 노이즈가 포함된 사람의 움직임이 잘 교정된 자연스러운 움직임으로 자동 조정된다. 양방향 순환신경망에 어텐션 기법을 도입하면, 입력으로 들어온 움직임을 인코딩할 때 여러 자세 중에 더 중요한 자세가 있는 프레임에 더 높은 어텐션 가중치를 부여함으로써, 다른 딥 러닝 네트워크와 비교해 더 나은 최적화 결과와 더 높은 정확도를 보인다. 실험을 통해 본 논문에서 제시한 방법이 다양한 스타일의 움직임과 노이즈를 효과적으로 처리함을 확인하였으며, 제시한 방법은 모션 캡처 후처리 단계의 애플리케이션으로 충분히 사용 가능할 것으로 기대된다.

• 조명전기설비학회논문지
• /
• 제23권3호
• /
• pp.10-17
• /
• 2009

In this paper, we explained the relation between evaluating display device and emotional image quality evaluation in human perceptual view. It is also suggested two emotional image quality evaluation method of display reflecting human visual function. One is the color space of CIECAM02 and the other is capturing moving image. It is necessary to standardize the evaluation methods of image quality based on emotional evaluation.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.103-108
• /
• 2015

Fluid-body interaction analysis of floating body with six degree-of-freedom motion is presented. In this study, three-dimensional incompressible Navier-Stokes equations are employed as a governing equation. The numerical method is based on a finite-volume approach on a cartesian grid together with a fractional-step method. To represent the body motion, the immersed boundary method for direct forcing is employed. In order to simulate the coupled six degree-of-freedom motion, Euler's equations based on rigid body dynamics are utilized. To represent the complex body shape, level-set based algorithm is utilized. In order to describe the free surface motion, the volume of fluid method utilizing the tangent of hyperbola for interface capturing scheme is employed. This study showed three different continuums(air, water and body) are simultaneously simulated by newly developed code. To demonstrate the applicability of the current approach, two different problems(dam-breaking with stationary obstacle and water entry) are simulated and all results are validated.