• 한국세라믹학회지
• /
• 제27권8호
• /
• pp.1027-1033
• /
• 1990

In order to identify the origin of phase coexistence at morphotropic tetragonal and rhombohedral boundary in PZT ceramics, the effect of chemical inhomogeneity on phase coexistence region was investigated. Two kinds of PZT ceramics with different chemical homogeneity were prepared by conventional solid state reaction and co-precipitation method. There was coexistence of tetragonal and rhombohedral phase over a wide composition range in PZT ceramics calcined by solid state reaction, and there was also phase coexistence of which region was reduced considerably in sintered samples. And phase coexistence region was not observed in co-precipitated PZT ceramics(within 1 mole%). Therefore compositional fluctuation is considered to be major origin of the phase coexistence at morphotropic phae boundary in PZT ceramics.

• 한국세라믹학회지
• /
• 제29권10호
• /
• pp.806-814
• /
• 1992

The aim of this study was to investigate the change in compressive strength, freacture behavior and degradation of piezoelectric properties with compressive cyclic loading in Pb(Zr, Ti)O3 of tetragonal, morphotropic phase boundary and rhombohedral composition. The highest compressive strength was found in rhombohedral composition. After poling treatment the strength increased by 8.4% and 6.5% in tetragonal and morphotropic phase boundary compositions respectively while changed little in rhombohedral. The increase of compressive strength after poling treatment is believed to be due to the internal stress around grain boundary by domain alginment toward electric field direction in the microstructures having tetragonality and the occurrence of domain switching to the direction perpendicular to electrical field during fracture. Fracture mode relatively change from transgranular to intergranular was observed in the large grain sized tetragonal and morphotropic phase boundary compositions before and after poling but the transgranular fracture mode always remained in the rhombohedral composition. From the X-ray diffractometer analysis the domains parallel to the electric field direction is known to undergo rearrangement during the cyclic loading into random direction that is responsible for the degradation of piezoelectric property.

• 한국세라믹학회지
• /
• 제32권8호
• /
• pp.915-921
• /
• 1995

The morphotropic phase boundary and phase transitions of the solid solutiion system, (1-x)(Na1/2Bi1/2)TiO3-PbTiO3＋xPbTiO3 were studied by investigating changes in crystal structure, variations in permittivity with temperature, and calorimetric behavior. It was observed that the morphotropic phase boundary (MPB) of this solid solutiion system was at near 14 mol% of PbTiO3. Compositions containing less than 10mol% PbTiO3 (x<0.1) exhibited a phase transition, i.e. ferroelectric rhombohedrallongrightarrowparaelectric paraelectric cubic, with increasing temperature. Composition containing more than 14 mol% PbTiO3 (x 0.14) showed a phase transition from ferroelectric tetragonal to paraelectric cubic. In the composition range of 0.1$\varepsilon$ (T) curve, which coincided with a phase transition from ferroelectric rhombohedral to an intermediate phase, was also found.

• 한국세라믹학회지
• /
• 제30권10호
• /
• pp.859-865
• /
• 1993

Morphotropic tetragonal and rhombohederal phase boundary(MPB) in PZT system was calculated and the effect of mechanical stress and electric field on the MPB was examined using phenomenological thermodynamic theory proposed by Devonshire. Mechanical stress and electric field was calculated to change free energies of phases and shift MPB. The stable composition range of the phase, of which spontaneous strain and spontaneous polarization aligned to the direction of tensile stress or electirc field, was expanded.

• The Korean Journal of Ceramics
• /
• 제1권1호
• /
• pp.13-20
• /
• 1995

Effects of thermal annealing on the dielectric/piezoelectric properties of $Pb(Zn, Mg)_{1/3}Nb_{2/3}O_3-PbTiO_3$ ceramics (PZMNPT) with Zn/Mg=6/4) were examined across the rhombohedral/tetragonal morphotropic phase boundary (MPB). Both the relative dielectric permittivity ($\varepsilon$r)and the piezoelectric constant($d_33$)/electromechanical coupling constant ($k_p$)were increased by thermal annealing ($800^{\circ}$~$900^{\circ}C$) after sintering at $1150^{\circ}C$ for 1 hr. Based on the dielectric analysis using the series mixing model and the concept of a random distribution of the local Curie points, the observed improvements in the dielectric and piezoelectric properties of PZMN-PT were interpreted in terms of the elimination of PbO-rich amorphous intergranular layers(~1nm) induced by thermal annealing. A concrete evidence of the presence of amorphous grain-boundary layers in the unannealed (as-sintered) specimen was obtained by examining the structure of intergranular region using a TEM.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.488-494
• /
• 1988

Effects of MnO2 addition on themicrostructure, dielectric and piezoelectric properties of Rhombohedral, Tetragonal and Morphotropic phase boundary(MPB) in Pb(Ni1/3Nb2/3)O3-PbTiO3-PbZrO3 system were investigated and respectively the amount of MnO2 addition was 0, 0.2, 0.5, 1.0, 3.0wt%. In the tetragonal region, compared with the Rhombohedral and Morpotropic phase boundary, Mechanical quality factor(Qm), Curie temperature(Tc) and Dissipation factor were promoted by addition of MnO2. According to the results of the microstructure, dielectric and piezoelectric properties, the solid solution range of MnO2 addition in this system was 0.2-0.5wt%.

• 한국진공학회지
• /
• 제17권2호
• /
• pp.148-155
• /
• 2008

PMN계 강유전체의 MPB 조성과 공존영역의 확산성을 이해하기 위해 유전 및 초전 특성을 분석하였다. PMN-PT계는 완만한 상전이를 보였으며, 이는 하나의 상유전과 2개의 강유전상이 공존함을 의미한다. 즉, 0.7PMN-0.3PT 조성 부근에서 능면정계와 정방정계의 공존 영역인 조성변태 상경계를 확인하였으며, 이들 조성은 연속적으로 능면정계$\rightarrow$정방정계$\rightarrow$입방정계로 상전이를 하였다. PT>0.325인 조성들은 측정된 진동수 범위에서 진동수 의존성을 보이지 않는 단일상의 강유전 특성을 보였으며, PMN>0.7인 조성들은 큰 진동수 의존성과 확산상전이의 전형적인 완화형 강유전 특성을 보였다. PMN-PT계의 조성변태 상경계 조성들은 우수한 유전 및 초전특성을 나타내었다.

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.253-259
• /
• 2012

In this study, crystal structural changes and dielectric properties of $(1-x)Pb(Yb_{1/2}Nb_{1/2})O_3-xPbTiO_3$ ((1-x)PYN-xPT) solid solutions were measured and analyzed with respect to the $PbTiO_3$ (PT) contents ($0.40{\leq}x{\leq}0.60$). From X-ray diffraction (XRD) measurements, (1-x)PYN-xPT solid solutions showed changes of the crystal structure from pseudocubic ($0.40{\leq}x{\leq}0.44$) to tetragonal ($0.52{\leq}x{\leq}0.60$) on increasing PT contents and exhibited the coexistence of pseudocubic and tetragonal phase near the morphotropic phase boundary (MPB) composition ($0.46{\leq}x{\leq}0.50$). The dielectric constant showed a maximum value at x = 0.46 and the maximum values in (1-x)PYN-xPT decreased with higher PT contents. The phase transition temperatures of (1-x)PYN-xPT solid solutions increased over the whole composition ranges tested ($0.40{\leq}x{\leq}0.60$).

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.523-531
• /
• 1988

The dielectric and piezoelectric properties with compositions in Pb(Ni1/3Nb2/3)O3-PbTiO3-PbZrO3-(PNN-PT-PZ)solid solution ceramics were investigated. In this study, the compsition ranges were 30 PNN 45mole%, 20 PT 50mole% and 50 PZ5mole%. As PT fraction were increased the grain size was increased and the fired density was decreased, but the changes of PNN fraction had no effect on the grain size. The Curie temperature was increased when PT and PNN fraction were increased. The displacement was increased but had a great hysteresis loss when PT fraction was increased. In morphotropic phase boundary, the maximum piezoelectric and electromechanical coupling factor were indicated. Morphotropic phase boundary(MPB) was 34 PT 36mole% in chang of compositions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.70-73
• /
• 1989

(1-x-y)Pb($Zn_{1/3}Nb_{2/3})O_3-Ba(Zn_{1/3}Nb_{2/3})O_3-PbTiO_3(0.12{\leq}x{\leq}0.21, 0.24{\leq}y{\leq}0.33$) ternary compound ceramics were fabricated by the mixed oxide method. The sintering temperature and time were 1050 [$^{\circ}C$], 2[hr]. Morphotropic phase boundary region was chosen for the composition. 0.55 PZN-0.21 BZN-0.24 PT specimen had the highest value of relative dielectric constants, 5353. The curie temperature of specimens were increased linearly with PT content. Near the morphotropic phase boundary, electro-mechanical coupoling factor and mechanical quality factor of the specimens had the highest values.