• Journal of Photoscience
• /
• 제6권3호
• /
• pp.109-115
• /
• 1999

Intense excimer laser irradiation of polymer films results in expansion and the following contraction , recovering ithe initial flat surface. The morphological dynamics is meausred directly by nanosecond time-resolved interferometry for polystyrene(PS), polyurethane, and polyimide films. The expansion proceeds with a speed of a few nm/ns , while the contraction depends upon the polymer ; very low contraction for PS, rapid 2 component shrinking for polyurethane, and rapid monotonous decay for polymide. These characteristic behavior are considered from viewpoints of interpenetrating structures of polymers, glass-rubber phase transitioni, thermal diffusion, and photothermal mechanism.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.948-952
• /
• 2001

Periodic mesoporous organosilicas with rope-based morphology from a reaction gel composition of 1 BTME : 0.57 ODTMABr : 2.36 NaOH : 353 H2O were synthesized. While long rope-shaped product dominated in case of static synthesis condition , gyroid type products instead of rope shaped product appeared and rope shaped product disappeared with agitation. PMO with such a long rope shaped morphology is firstly reported. Additionally, various rope-based morphologies depending on the degree of bending, twisting, folding and winding of rope such as spirals, discoids, toroids, and worm-like aggregates were observed. White powdered products were characterized by X-ray diffraction, N2 sorption measurement, SEM and TEM. From XRD pattern and TEM image, ODTMA-PMO with hexagonal symmetry was identified. The pore diameter and BET surface area of ODTMA-PMO are $32.9{\AA}$ and 799 m2g-1 , respectively. Hexagonally arrayed channels run with long axis of rope and rope-based shapes with various degree of curvature, which was elucidated by using TEM images.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1194-1201
• /
• 2013

This paper introduces a vision-based automatic system (VAMS) for non-contact measurement of morphometric characteristics of flatfish, such as total length (TL), body width (BW), height (H), and weight (W). The H and W are simply measured by a laser displacement and a load cell, respectively. The TL and BW are measured by a proposed morphological image processing algorithm. The proposed algorithm cans measurement, when the tail of flatfish is deformed, and when it is randomly oriented. In the experiment, the average and maximum measurement errors were recorded, and standard deviations and coefficients of variation (CVs) for the measurements were calculated. From those results, when flatfish the TL measurements had an average of 266.844 mm, a standard deviation of 0.351 mm, a CV of 0.131%, and a maximum error of 0.87 mm with straightened flatfish ($TL_A$ : 267 mm, $BW_A$ : 141 mm), and when flatfish of different sizes were measured, the errors in the TL and BW measurements were both about 0.2 %. Using a single conveyor, the VAMS can process up to 900 fishes per hour. Moreover, it can measure morphometric characteristics of flatfish with a TL of up to 500 mm.

• 한국지역지리학회지
• /
• 제10권3호
• /
• pp.667-681
• /
• 2004

이 연구의 목적은 태안반도 신두해안사구의 유효풍속과 지형변화의 관계를 밝히는 것이다. 퇴적물의 유동은 8개의 횡단면에서 침식핀을 이용하여 1999년 7월부터 2000년 7월까지 고도변화를 측정한 후 계산되었다. 연구결과가 시사하는 바는 다음과 같다. 첫째, 사구지역에서의 지형변화와 유효풍속에 근거하여 퇴적기와 침식기가 구분되었다. 퇴적기는 11월부터 4월까지로 모래의 집적이 주로 전사구에서 일어났으며 순차적으로 사구평지로 이어졌다. 침식기는 5월부터 10일까지로 전사구의 말단부에서 소규모 침식과 퇴적이 반복되는 패턴을 보였다. 둘째. 조사기간 동안 조사지역에서의 전체 퇴적물수지는 $10.2\;m^3$/m/yr로 잉여로 나타났으나 지역적인 차이가 나타났다. 이차사구에서는 결핍되는 곳도 나타났다. 사구지역의 북단에서는 모래의 공급이 활발하게 이루어지고 있는 반면 중앙부와 남부지역에서는 모래의 공급이 빈약했다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.154-154
• /
• 2017

Root is an important organ of plant that typically lies below the surface of the soil. Root surface determines the ability of plants to absorb nutrient and water from the surrounding soil. This study describes an application of image processing and computer vision which was implemented for rapid measurement of seed germination such as root length, surface area, average diameter, branching points of roots. A CCD camera was used to obtain RGB image of seed germination which have been planted by wet paper in a humidity chamber. Temperature was controlled at approximately 250C and 90% relative humidity. Pre-processing techniques such as color space, binarized image by customized threshold, removal noise, dilation, skeleton method were applied to the obtained images for root segmentation. The various morphological parameters of roots were estimated from a root skeleton image with the accuracy of 95% and the speed of within 10 seconds. These results demonstrated the high potential of computer vision technique for the measurement of seed germination.

• Journal of Biosystems Engineering
• /
• 제14권3호
• /
• pp.188-195
• /
• 1989

컴퓨터 화상처리(畵像處理)에 의한 묘목(苗木)의 형태학적 성질을 측정하기 위하여 화상포착방법과 화상처리 기술 및 관련 연산법을 개발하였다. 이러한 방법에 의한 측정결과를 기존의 측정방법에 의한 측정결과와 비교하여 그 정밀도(精密度)를 분석(分析)하였으며, 컴퓨터 화상(畵像)에 의한 측정방법의 장점을 고찰하였다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.534-539
• /
• 2005

Particle image analyzer for measuring droplet size has been developed. Image processing technique was used with relaxation method. The morphological method based on partial curvature information of pre-processed images was adopted for recognition and separation of overlapped particles. The measurement results show that the present method may be reliable for the analysis of the size and distribution of droplets produced by water mist spay flow.

• 한국염색가공학회지
• /
• 제19권4호
• /
• pp.38-46
• /
• 2007

Surface properties of the plasma treated fabric were changed while maintaining its bulk properties. Surface of plasma treated fabric take charge of enhanced adhesion by surface etching, surface activity. The water repellency coating Poly(Ethylene Terephthalate) fabric was treated with atmospheric pressure plasma using various parameters such as Argon gas, treatment time, processing power. Morphological changes by atmospheric pressure plasma treatment were observed using field emmission scanning electron microscopy(FE-SEM) and the zeta-potential measurement, contact angle measurement equipment. At the atmospheric pressure plasma treatment time of 150 sec, the power of 800W, the best wettability and peel strength were obtained. And we confirmed the possibility of industrial application by using atmospheric plasma system.

• 대한가정학회지
• /
• 제31권4호
• /
• pp.209-214
• /
• 1993

The purpose of this study is to provide the fundamental data for a dummy design used I read-made clothing and underwear production I terms of a pattern of breast types based o their morphological characteristics in accordance with different pattern of breast types. The breast's side and frontal views of the breast were measured with 90 junior high school girls of age between 13 and 16 residing in the urban area of Seoul using the plan photogrammetry. 1. The correlation between the side view body measurement and the breast's side and front view were analyzed by using the canonical correlation analysis, whereby the side view body measurement is showing a 39% of the breast's side view and frontal view. 2. The breast's side and front view has been classified by cluster analysis. The results of custer analysis for the breast's side and front view would be turned out the four cluster. 1) The cluster Ⅰ, The most volumed breast's side view.(20%) 2) The cluster Ⅱ, The fastest growing breast's front view.(38%) 3) The cluster Ⅲ, the latest growing breast.(3%) 4) The cluster Ⅳ, the middle degree growing breast.(39%)

• 대기
• /
• 제26권3호
• /
• pp.473-482
• /
• 2016

An accurate determination of turbulent fluxes over an urban area is a challenging task due to its morphological diversity and associated flow complexity. In this study, an eddy covariance (EC) method is applied over a highly heterogeneous urban area in a small city (Gongju), South Korea to investigate the quantitative influence of 'coordinate tilt' in determining the turbulent fluxes of sensible heat, latent heat, momentum, and carbon dioxide mass. Two widely-used coordinate transform methods are adopted and applied to eight directional sections centered on the site to analyze a 1-year period EC measurement obtained from the urban site: double rotation (DR) and planar fit (PF) transform. The results show that mean streamline planes determined by the PF method are distinguished from the sections, representing morphological heterogeneity of the site. The sectional pitch angles determined by the DR method also compare well with those in the PF method. Both the PF and DR methods show large variabilities in the determined streamline planes at each directional section, implying that flow patterns may form in a complicate way due to the surface heterogeneity. Resulting relative differences of the turbulent fluxes, defined by $(F_{DR}-F_{PF})/F_{DR}$, are found on average +13% in sensible heat flux, +21% in latent heat flux, +37% in momentum flux, and +26% in carbon dioxide mass flux, which are larger values than those reported previously for fairly homogeneous natural sites. The fractional differences depend significantly on wind direction, showing larger differences in northerly winds at the measurement site. It is also found that the relative fractional differences are negatively correlated with the mean wind speed at both stable/unstable atmospheric conditions. These results imply that EC turbulent fluxes determined over heterogeneous urban areas should be carefully interpreted with considering the uncertainty due to 'coordinate tilt' effect in their applications.