• 한국해양학회지:바다
• /
• 제8권2호
• /
• pp.132-137
• /
• 2003

서해 중부 연안에서의 내부파 관측을 위하여 현장 관측과 인공위성의 SAR(Synthetic Aperture Radar)센서를 이용한 관측을 함께 수행하였다. 2002년 5월 28일부터 30일까지 어청도 서쪽 10 km해상에서 thermistor chain, RCM 및 ADCP 유속계를 계류하여 관측하였으며 주변해역에 대한 CTD 관측도 수행하였다. 또한 29일 오전 6시 53분 SAR 영상을 획득하였다. 현장관측 결과 계류 지점을 통과하는 여러 개의 내부파가 관측되었고 SAR 영상에서도 관측지점 주변에서 다수의 내부파 군의 공간적인 분포를 확인할 수 있었다. SAR영상에서 관측된 내부파의 공간적인 특성과 현장 관측에서 계산된 시간적인 특성에 K-dv(Korteweg and de Vries)방정식을 적용하며 서해 중부 연안에서 발생한 내부파의 특성을 분석하였다. 이러한 내부파는 물리적으로, 군사적으로, 그리고 해양생물학적으로 매우 중요한 현상이며 서해의 중요한 여름철 특성으로 고려되어야 할 것이다.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.237-248
• /
• 2016

As OPB and IPB moment-induced fatigue damage on mooring chain links were reported for a offloading buoy, verification of OPB and IPB fatigue has been a key engineering item in offshore structure mooring design. Mathematical and physical features of the conventional approach which was mainly explained in BV guideline are reviewed and disadvantages of the conventional approach are addressed in terms of stress proportionality and nonlinearity of OPB and IPB moments. In order to eradicate these disadvantages, a novel approach is newly proposed which is able to dispel apprehension on stress proportionality and is not dependent of nonlinearities of OPB and IPB moments. Significant differences between two approaches are suggested by comparing relations of OPB moment versus OPB interlink angle and IPB moment versus IPB interlink angle. For periodic OPB tension angle processes having three different OPB angle ranges with a simple irregular tension process, fatigue damage calculation reveals that OPB moment-induced fatigue damage has dominant portion to total fatigue damage. Comparative studies between two approaches also show that the conventional approach based on BV guideline predicts fatigue damage far conservatively since it assume unrealistic high stress concentration factor for tension load. Meanwhile IPB moment-induced fatigue damage is negligible compared to tension-induced fatigue damage.

• Ocean Systems Engineering
• /
• 제13권3호
• /
• pp.287-312
• /
• 2023

The global performance of a 15 MW floating offshore wind turbine, a newly designed semisubmersible floating foundation with multiple heave plates by CNOOC, is investigated with two independent turbine-floater-mooring coupled dynamic analysis programs CHARM3D-FAST and OrcaFlex. The semisubmersible platform hosts IEA 15 MW reference wind turbine modulated for VolturnUS-S and hybrid type (chain-wire-chain with clumps) 3×2 mooring lines targeting the water depth of 100 m. The numerical free-decay simulation results are compared with physical experiments with 1:64 scaled model in 3D wave basin, from which appropriate drag coefficients for heave plates were estimated. The tuned numerical simulation tools were then used for the feasibility and global performance analysis of the FOWT considering the 50-yr-storm condition and maximum operational condition. The effect of tower flexibility was investigated by comparing tower-base fore-aft bending moment and nacelle translational accelerations. It is found that the tower-base bending moment and nacelle accelerations can be appreciably increased due to the tower flexibility.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.232-236
• /
• 2003

The anchor is laid on seabed and the main engine is worked to against incident environmental loads in typoon. As the main engine is broken down in the storm, the anchor chain is cutted and the vessel is drifted. Although a ship is moored by two point mooring lines to keep the her position, a ship is crashed into a rock because of typoon and the accident of oil spilling may be occured. In this paper, we studied the position-keeping of a ship which is analyized based on the slow motion maneuvering equations considering wave, current and wind. The direct integration method is employed to estimate wave loads. The current forces are calculated by using mathematical of MMG. The two point mooring forces are quasisatatically evaluated by using the catenary equation. The coefficeints of wind forces are modeled from Isherwood’s emperical data and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two point moored ship are simulated considering wave, current, wind load in time domain.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.8-12
• /
• 2004

The anchor is laid on the seabed, and the main engine is working against incident environmental loads in a typhoon. As the main engine is broken Mum in the storm, the anchor chain is cut and the vessel drifts. Although a ship is moored by two-point mooring lines to maintain her position, it has crashed into a rock because of a typhoon, resulting in a possible accidental oil spillage. In this paper, we studied maintenance of a ship's position, which is analyzed based on the slow motion maneuvering equations considering wave, current, and wind. To estimate wave loads, the direct integration method is employed. The current forces are calculated, using MMG (Mathematical Modeling Group). Th two-point mooring forces are quasi-statistically evaluated, using the catenary equation. Th coefficients of wind forces are modeled from Isherwood's empirical data, and the variation of wind speed is estimated by wind spectrum. The nonlinear motions of a two-point moored ship are simulated, considering wave, current, and wind load, in specific domain of time.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.183-191
• /
• 2002

해수교환이 우수하고, 조차에 따라 상·하로 자유롭게 운동하며, 연약지반과 대수심역에도 설치될 수 있다는 것을 일반적인 부방파제의 주요한 특징으로 들 수 있다. 본 연구는 말뚝계류된 부방파제에 의한 3차원파랑제어와 동적인 거동을 경계적분법과 고유함수전개법을 병용하는 수치해석법으로부터 논의한다. 여기서, 말뚝계류시스템은 연직운동만이 허용되고 다른 운동성분들은 모두 구속되며, 체인계류시스템보다도 파랑에너지의 흡수가 많은 것으로 알려져 있다. 본 연구에서는 말뚝계류에 있어서 말뚝과 본체인 폰툰과의 사이에 작용하는 마찰력과 같은 저항력은 고려되지 않는다. 수치해석결과에 따르면 부방파제의 홀수와 폭의 변화는 파랑제어에 큰 영향을 미치고, 입사파의 주기가 길면 부방파제를 통한 전달파가 크다는 것을 알 수 있다. 그리고, 부방파제의 연직운동은 단주기파에서 크게 나타난다.

• 산업융합연구
• /
• 제20권12호
• /
• pp.11-25
• /
• 2022

본 연구에서는 블록체인이 적용된 공급망관리 정보시스템으로 전환의도에 영향을 미치는 요인을 검증하고자한다. 이를 위해 선행연구의 고찰을 통해 변수 선정 및 연구모형을 구성하고, TOE 프레임워크와 PPM 모델을 활용해 실증분석을 시행하였다. Push 요인, Pull 요인이 블록체인 시스템 전환의도에 미치는 영향 및 Mooring 요인인 전환비용을 통한 조절효과를 검증하였다. 국내에 소재한 중소기업을 대상으로 설문을 하여 320개 응답 자료를 표본으로 구조방정식 모형을 사용해 가설을 검증하였다. 연구 결과 Push 요인인 사회적 영향과 Pull 요인인 경영진의 혁신의지가 전환의도에 유의미한 영향을 미쳤다. 그리고 전환비용 인식 수준이 높고 낮은 집단 간 조절효과를 확인하였다. 본 연구는 블록체인 기반 공급망관리 정보시스템의 구현을 통한 기업의 경쟁력을 제고시킬 수 있는 SCBM(supply chain & blockchain management)의 개념 및 연구 방향을 제시하였다는 점에 의의가 있다.

• 한국항해항만학회지
• /
• 제46권6호
• /
• pp.483-490
• /
• 2022

부유식 라이다는 해상풍력단지 조성 시 필수적인 풍황관측의 새로운 패러다임을 제공하는 시스템이다. 시간과 비용을 절약하고 환경에 미치는 영향을 최소화하며 지역사회의 반발까지 줄일 수 있어 업계의 표준으로 떠오르고 있다. 하지만 부표의 동요에 의한 교란요인이 관측자료의 신뢰도에 영향을 미치므로 안정적인 플랫폼의 설계 및 검증이 매우 중요하다. 국내에서는 이 분야의 기술 진출이 늦어짐에 따라 다수의 외국계 장비업체들이 국내시장을 장악하고 있다. 우리나라 서해안은 조수간만의 차가 매우 큰 천해성 환경이기 때문에 강한 해류가 반복적으로 나타나고, 계절별로 다른 강한 에너지의 파도가 형성된다. 본 논문은 이와 같이 복합적인 환경 특성을 지닌 우리나라 해역에서 라이다 운영에 적합한 부표식에 대한 연구를 수행하였다. 본 논문에서는 가장 먼저 적용된 선박형 부표식의 최적화 설계 및 검증 사례를 소개하고, 향후 다양한 플랫폼 개발의 기반이 될 중요한 개념을 도출하고자 한다.

• 한국농공학회지
• /
• 제24권1호
• /
• pp.31-43
• /
• 1982

Engineering phase of dairy housing systems has close connection with the milk produc- tivity of dairy cattle, the quality of milk, extension of dairy production systems, labor- saving in management of dairy cattle and the like. Moreover, the rate of investment of dairy housing facilities is of relatively high level, However, there has been almost no research effort for the improvement of engineering aspects of dairy housing systems in Korea. The purpose of this study is to find out general engineering problems and to recomm- end the improvement in dairy housing systems in Korea. Field survey by means of questionaire, direct measurements, taking pictures and sketching was conducted to get necessary information for the study. Kyung-ki Do region was firstly chosen for sampling area since it has included more than half of the number of dairy farms of the whole country. The results obtained are summarized as follows: 1. In overall dairy farm layout, the dwellings of workers were ignored in the light of sanitary environment 2. The layout of stalls in a dairy barn belongs mostly to the type of double-row face-out, which is compatible with the emphasis of manure disposal activities. 3. While the width and length of stalls were sufficiently close to the standard dimension, the width of mangers was much less than the standard dimension. 4. The width and depth of manure gutters and the width of working alleys were much. less than the standard dimension. 5. The mooring equipment was mostly in the classes of chain or rope. The watering equipment was not facilitated independantly except the one cese of using watercup. 6. The bucket milkers with one or two bucket milkers with the capacity of two cattles. each were used as milking equipment in most dairy farms. 7. There were only few milk rooms independently spaced from other space, in which the arrangement of milking equipment was much less than the standard condition. 8. The lounging ground area was averaged to be sufficient for the activity of dairy herd. 9. Silos for silage used during winter consisted of mostly bunker silos, trench silos and underground vertical silos. Ordinary vertical silos were considered for the farmers to be inconvenient for the labor saving. 10. From the view point of heat conservation and moisture removal within the dairy barns, windows were not flexible for the easy ventilation and ceiling part was not adequate for temperatur maintenance. 11. Waste treatment and disposal systems were not provided with most dairy farms, therefore the livestock waste pollution problems would be serious in the near future.