• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.569-574
• /
• 2020

플로팅도크는 육상에서 건조된 선박을 해상으로 진수하기 위한 주요한 설비이다. 2000년대 초반 국내에서 육상에서 건조한 선박을 플로팅도크를 이용하여 진수할 수 있는 육상 건조 공법이 개발 적용됨에 따라 드라이도크에 대한 투자 없이 신조 사업에 참여할 수 있는 기회가 대폭 확대되었다. 본 논문에서는 이러한 육상 건조 공법을 활용하여 드라이도크를 보유하지 않은 중소업체에서 건조한 선박을 진수시킬 수 있는 플로팅도크의 안전한 계류를 위한 기본 계산을 수행하고 이를 기반으로 계류 시스템을 설계하였다. 본 논문은 적재 중량 4,000 Ton급 플로팅도크를 대상으로 하여, 플로팅도크가 설치되어 운영될 대불부두의 환경 요건 중 가장 심각한 상황인 태풍 상황을 고려하여 수행되었다. 설계 하중의 계산은 국제적으로 통용되는 기준을 따라 풍하중, 조류하중, 파에 의한 하중을 고려하였다. 대불 부두의 기존 계류 설비를 활용하여 플로팅 도크의 계류 로프 초기 배치를 수행한 후 주어진 하중에 따라 계류 로프별로 최소 파단 강도를 계산하였다. 계산 결과를 바탕으로 최소 파단 강도를 줄일 수 있도록 계류 배치를 일부 수정하였으며 최종 계류 라인의 규격을 선정하였다.

• 해양환경안전학회지
• /
• 제26권7호
• /
• pp.767-776
• /
• 2020

최근 지구온난화에 따른 기후변화에 따라 과거와는 다른 양상의 기상 변화가 발생하고 있으며, 해수 온도 상승으로 태풍의 대형화와 강도증가가 발생하고 있다. 이에 따라 선박이 접안 중 갑작스러운 돌풍 발생시 선박의 계류안전성 확보를 위해 사용할 수 있는 돌풍 대비용 직주의 필요성이 증대되고 있다. 본 연구에서는 항만 및 어항 설계기준상 곡주 및 직주 배치 기준을 분석하고 계류안전성 평가프로그램을 사용하여 12개 시나리오에 따른 직주 사용시 계류안전성 민감도 분석을 수행하였다. 평가 결과, 돌풍 대비용 직주에 선수 및 선미 브레스트라인을 추가하였을 경우, 일반적인 형태의 계류라인 배치에 비해 계류요소값이 감소하는 것으로 분석되었다. 본 연구 결과는 접안선박 및 항만의 특성을 고려한 돌풍 대비용 직주 배치를 제안하기 위한 기초 자료로 활용될 수 있으며, 부두에서 직주의 배치는 돌풍 발생시 선박운항자 측면에서 선박의 계류안전성을 확보하기 위한 효율적인 방안이 될 것으로 사료된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.69-75
• /
• 2001

It is very important to secure the marine vessels during entire loading and off-loading operations. The environment influences on loading conditions. the western coastal area of Korea is characterized as a strong current due to a high tidal range. The tension of mooring lines varies as per the current and wave changing its magnitude during the day. A proper mooring arrangement and design of mooring line should be determined as per environment conditions. In this study, a 50,000 DWT container ship being moored is investigated numerically. The dynamic tension of mooring lines is estimated by MORA (Mooring Response Analysis) software. Environmental conditions of selected offshore terminal site are plugged as input data. The mooring line tensions are obtained for various wave frequencies per wave directions. The results demonstrate the change of tensions of lines and the allowable range of safe conditions in berthed mooring.

• Ocean Systems Engineering
• /
• 제2권3호
• /
• pp.217-228
• /
• 2012

As the size of container ships continues to increase, not many existing harbors can host the super-container ship due to its increased draft and the corresponding dredging requires huge budget. In addition, the minimization of waiting and loading/offloading time is the most important factor in harbor competitiveness. In this regard, mobile-harbor concept has been developed in Korea to achieve much improved harbor capacity and efficiency. In developing the concept, one of the most important elements is the operability of crane between two or more floating bodies in side-by-side arrangement. The container ship is to be stationed through a hawser connection to an outside-harbor fixed-pile station with the depth allowing its large draft. The mobile harbors with smart cranes are berthed to the sides of its hull for loading/offloading containers and transportation. For successful operation, the relative motions between the two or more floating bodies with hawser/fender connections have to be within allowable range. Therefore, the reliable prediction of the relative motions of the multiple floating bodies with realistic mooring system is essential to find the best hull particulars, hawser/mooring/fender arrangement, and crane/docking-station design. Time-domain multi-hull-mooring coupled dynamic analysis program is used to assess the hydrodynamic interactions among the multiple floating bodies and the global performance of the system. Both collinear and non-collinear wind-wave-current environments are applied to the system. It is found that the non-collinear case can equally be functional in dynamics view compared to the collinear case but undesirable phenomena associated with vessel responses and hawser tensions can also happen at certain conditions, so more care needs to be taken.

• 한국해양공학회지
• /
• 제27권4호
• /
• pp.22-32
• /
• 2013

This paper presents the conceptual design procedure for the taut-leg mooring lines of a floating-type combined renewable energy platform. The basic configuration of the platform is determined based on an understanding of floating offshore plants. The main dimensions and mass distribution are determined based on a hydrostatic calculation. To identify the motion history of the floating platform and the tension history of the mooring lines, a hydrodynamic analysis is executed using Ansys.Aqwa. This helps in the selection of the best configuration for the mooring system such as the number of mooring lines, wire types, anchored positions, etc. In addition, the fatigue life of the mooring lines can be predicted from the tension history using the rain-flow cycle counting method.

• 풍력에너지저널
• /
• 제14권2호
• /
• pp.26-33
• /
• 2023

In this study, the global response characteristics of floater and mooring for floating offshore wind turbine with a detachable mooring system are performed. Global motion and structural response result extracted from the coupled motion analysis of 10MW DTU floating offshore wind turbine with detachable mooring system modeled by high-order boundary element model and finite element mesh, were used to study the characteristics of tension on mooring lines subjected to three different types of ocean loads. Breaking limit of mooring line characterized by wind, current and wave load has a major effect on the distribution of mooring tension found in time domain analysis. Based on the numerical results of coupled motion analysis, governing equation for calculating the motion response of a floater under ocean loads, and excitation force and surge motion and tension respectively are presented using excursion curve. It is found that the response of floater is reliable and accurate for calculating the tension distributions along the mooring lines under complex loadings. This means that the minimun breaking limit of mooring system satisfied a design criteria at ultimate ocean environmental loading condtions.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.320-331
• /
• 2023

In this study, a model test was conducted using the soft-mooring technique to evaluate the added resistance of the ship in waves. The study also examined the specific factors that should be considered during the soft-mooring test. The main purpose of soft-mooring is to prevent drifting caused by waves by providing horizontal restoring forces. However, it can also create undesired restoring forces in the vertical direction. Therefore, we examined the restoring force of the ship's 6-DOF motion based on the arrangement of the soft-mooring and the height of the mooring connection point. We also checked the corresponding resonance period and drift distance. The soft-mooring test was conducted twice, once with self-propulsion and once without self-propulsion, allowing us to review the advantages and disadvantages of each test technique. The main parameters measured in these model tests were 6DOF motion and added resistance on the ship. We compared these measurements obtained from two different techniques (with and without self-propulsion). Additionally, we also compared the measurements based on the types of measuring sensors used (2D load cells on FP, AP, and 1D load cells on each mooring line) as well as the height of the mooring connection point.

• Journal of Ship and Ocean Technology
• /
• 제9권1호
• /
• pp.11-26
• /
• 2005

In this study, the program to investigate the multiple body interaction effects between a floating platform and a shuttle tanker considering the coupled effect of hull (FPSO) with mooring lines and risers was developed. The coupled analysis program, which is called WINPOST-MULT using the hydrodynamic analysis results by WAMIT, was made. For the verification of WINPOST-MULT by means of numerical experiments, two multiple-body models of an FPSO-FPSO and an FPSO-shuttle tanker system are adopted. With the FPSO-FPSO model and a two-mass-spring system to idealize two identical bodies for the 100-year storm wave condition in GOM, the numerical simulations were performed to investigate the interaction effects between two identical bodies. For the more reality, the coupled analysis for the FPSO-shuttle tanker model in the tandem arrangement was carried out in the consideration of the environmental condition of the West Africa Sea as a rather mild condition. Through the case studies with interaction effect and without interaction effect by the iteration method and the combined method, it is verified that the program is a very useful tool for the analysis of the interaction problem of multiple-body system and the coupled problem of the hull/mooring/riser.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.283-289
• /
• 2015

RGT(Riser Guide Tube) is a part of mooring on the bottom of a turret system to be connected with a production riser, and DBSC(Diverless Bend Stiffener Connector) is a latching component between them. In this paper, appropriate lug arrangement is decided mathematically for the case that a DBSC is lifted and installed on a RGT under the water while FPSO is under construction. Considering asymmetric arrangement & position of RGT and initial lug position, additional lug positions are determined by using an optimization method. The modified installation scheme with new lug points is investigated with a lifting simulation system, SIMSON. The simulation result shows that the installation of DBSC on RGT under the given conditions is quite feasible; therefore the mathematical method is proven to be appropriate.

• 한국전산구조공학회논문집
• /
• 제31권5호
• /
• pp.215-226
• /
• 2018

본 논문에서는 수중폭발(UE: underwater explosion)에 의한 해중터널(SFT: submerged floating tunnel)의 동적거동을 양해법(explicit)를 이용하는 LS-DYNA에 의한 유한요소해석을 통하여 분석하였다. SFT의 유한요소모델은 원형단면의 강재 라이너에 콘크리트가 채워진 복합재 원형단면으로 고려되었다. 해중터널 시스템의 중앙부 100m 구간은 탄소성재료를 고려한 솔리드(solid)요소로 상세하게 모델링하였으며, 양측 방향으로 각각 1km 구간에 대해서는 탄성재료를 고려하여 빔(beam) 요소로 이상화하여 모델링하였다. 사선계류시스템은 케이블(cable)요소를 적용하였으며, 수중폭발에 의한 동적거동시 수리동적질량의 영향을 고려하기 위하여 원형단면에 대한 추가질량을 고려하였다. 또한 부력과 같은 상시하중을 초기조건으로 고려하기 위하여 동적완화해석(dynamic relaxation analysis)를 수행하였다. UE는 부력비(B/W)와 폭발지점으로부터 거리의 변화에 대해서 고려하였으며, 폭발의 규모는 천안함 합동조사보고서(2010)를 참조하여 TNT 360kg로 결정하였다. 수중폭발 해석결과, 폭발지점으로부터 SFT까지 거리는 관입량, 충격압력의 크기와 반비례 관계에 있고, 부력비(B/W)가 커질수록 계류장력도 커짐을 확인하였다. 그러나 사선계류라인의 계류각 변화는 SFT의 수평거동, 관입량, 계류력, 충격압력과의 연관성을 찾을 수가 없었다.