• Speech Sciences
• /
• v.8 no.2
• /
• pp.23-37
• /
• 2001

The primary sound produced by the vibration of vocal folds reaches the velopharyngeal isthmus and is directed both nasally and orally. The proportions of the each component is determined by the anatomical and functional status of the soft palate. The oral sounds composed of oral vowels and consonants according to the status of vocal tract, tongue, palate and lips. The nasal sounds composed of nasal consonants and nasal vowels, and further modified according to the status of the nasal airway, so anatomical abnormalities in the nasal cavity will influence nasal sound. The measurement of nasal sounds of speech has relied on the subjective scoring by listeners. The nasal sounds are described with nasality and nasalization. Generally, nasality has been assessed perceptually in the effect of maxillofacial procedures for cleft palate, sleep apnea, snoring and nasal disorders. The nasalization is considered as an acoustic phenomenon. Snoring and sleep apnea is a typical disorders due to abundant velopharynx. The sleep apnea has been known as a cessation of breathing for at least 10 seconds during sleep. Several medical and surgical methods for treating sleep apnea have been attempted. The uvulopalatopharyngoplasty(UPPP) involves removal of 1.0 to 3.0 cm of soft palate tissue with removal of redundant oropharyngeal mucosa and lateral tissue from the anterior and sometimes posterior faucial pillars. This procedure results in a shortened soft palate and a possible risk following this surgery may be velopharyngeal malfunctioning due to the shortened palate. Few researchers have systematically studied the effects of this surgery as it relates to speech production. Some changes in the voice quality such as resonance (nasality), articulation, and phonation have been reported. In view of the conflicting reports discussed, there remains some uncertainty about the speech status in patients following the snoring and sleep apnea surgery. The study was conducted in two phases: 1) acoustic analysis of oral and nasal sounds, and 2) evaluation of nasality.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.2
• /
• pp.142-149
• /
• 2009

This paper investigates operating characteristics of three-phase matrix converter with unity input power factor by direct duty-ratio pulse-width modulation in the case of balanced and unbalanced load. It can be found from the system analysis that (1) The control algorithm for unity power factor is not related to the variables of load sides but the input voltages, (2) With the balanced three-phase load except for the pure reactive load, the unity input power factor can be achieved, (3) In the case of the unbalanced linear load, the equivalent input characteristics of the matrix converter can be seen like the nonlinear resister, (4) When the input frequency and the output frequency have the specific relationship, each input phases have the same sharing of the average power. The feasibility and validity of the analysis were verified by simulation and experimental results.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.2
• /
• pp.95-110
• /
• 2013

We report various synchrotron radiation laboratory based techniques used to characterize cement based materials in nanometer scale. High resolution X-ray transmission imaging combined with a rotational axis allows for rendering of samples in three dimensions revealing volumetric details. Scanning transmission X-ray microscope combines high spatial resolution imaging with high spectral resolution of the incident beam to reveal X-ray absorption near edge structure variations in the material nanostructure. Microdiffraction scans the surface of a sample to map its high order reflection or crystallographic variations with a micron-sized incident beam. High pressure X-ray diffraction measures compressibility of pure phase materials. Unique results of studies using the above tools are discussed-a study of pores, connectivity, and morphology of a 2,000 year old concrete using nanotomography; detection of localized and varying silicate chain depolymerization in Al-substituted tobermorite, and quantification of monosulfate distribution in tricalcium aluminate hydration using scanning transmission X-ray microscopy; detection and mapping of hydration products in high volume fly ash paste using microdiffraction; and determination of mechanical properties of various AFm phases using high pressure X-ray diffraction.

• Journal of the Korean Society of Costume
• /
• v.63 no.7
• /
• pp.1-16
• /
• 2013

The objective of this study is to analyze the characteristic of a functional design for a commercial outdoor brand jacket based on 3 types of functions : windproof, waterproof, and cold proof. To analyze the design and fabric characteristics of outdoor jackets by function, 903 men's and women's outdoor jacket images were selected from the catalogues during S/S 2009 - F/W 2011 of the 6 brands: The North Face, Columbia Sports Wear, Kolon Sports, K2, Arcteryx and Mont-Bell. These brands were selected based on their high market share and brand awareness of the outdoor brands in Korea. In this study, design elements analysis was conducted as following 8 elements: hood/collar height/central front flap/waistline/pocket location/ventilation for the body part/sleeve patterns/cuff for the sleeve part. Fabrics were analyzed by the frequency of fabric types used in the 3 jacket types. According to the result derived from the analysis of the six brands of outdoor wear jacket design trends by year, detachable hood and a co-use of velcro and elastic bands have been mainly designed for all of windproof, waterproof, and cold proof jacket to all in order to respond quickly to changes in the external environment. For reinforced storage function on trekking, the number of pockets has been gradually growing, and a function was being developed to connect an electronic device to a pocket. The method, result, and collateral observations relevant to each of these phases are described. Outdoor jacket design characteristics were investigated for outdoor brands, which can provide data to suggest more accurate functional design, and satisfy functional design needs. In this regard, this research was significant in the sense that it suggested preliminary data to reconsider competitiveness of the brand products.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.111-111
• /
• 2001

목적： To evaluate the feasibility of the event-related functional MR study using power grip studying the hand motor system 대상 및 방법： Event-related functional MRI was performed on a 1.5T MR unit in seven norm volunteers (man=7, right-handedness=2, left-handedness=5, mean age： 25 years). A single-shot GRE-EPI sequence (TR/TE/flip angle： 1000ms/40ms/90, FOV = 240 mm matrix= 64$\times$64, slice thickness/gap = 5mm/0mm, 7 true axial slices) was used for functiona MR images. A flow-sensitive conventional gradient echo sequence (TR/TE/flip angl 50ms/4ms/60) was used for high-resolution anatomical images. To minimize the gross hea motion, neck-holders (MJ-200, USA) were used. A series of MR images were obtained in axial planes covering motor areas. To exclude motion-corrupted images, all MR images wer surveyed in a movie procedure and evaluated using the estimation of center of mass of ima signal intensities. Power grip task consisted of the powerful grip of all right fingers and hand movement ta used very fast right finger tapping at a speed of 3 per 1 second. All tasks were visual-guid by LCD projector (SHARP, Japan). Two tasks consisted of 134 phases including 7 activatio and 8 rest periods. Active stimulations were performed during 2 seconds and rest period were 15 seconds and total scan time per one task was 2 min 14 sec. Statistical maps we obtained using cross-correlation method. Reference vector was time-shifted by 4 seconds an Gaussian convolution with a FWHM of 4 seconds was applied to it. The threshold in p val for the activation sites was set to be 0.001. All mapping procedures were peformed usin homemade program an IDL (Research Systems Inc., USA) platform. We evaluated the activation patterns of the motor system of power grip compared to hand movement in t event-related functional MRI.

• The Journal of Korean Medical History
• /
• v.22 no.1
• /
• pp.15-24
• /
• 2009

The objective of this article is to analysis of Acupuncture & Moxibustion Fix-a-day Method (AMFDM;鍼灸擇日) shown in the Seunjeongwon-Ilgi(承政院日記). Through such inquisition, The practical application of AMFDM could be found. The authors used web database of Seunjeongwon-Ilgi(承政院日記) serviced by National Institution of Korea History. We searched the database twice. First, We check up the database using key words - '忌日', '吉日', '拘忌', '鍼', '針' and '灸'. Search words is "(忌日|吉 日|拘忌)&(鍼|針|灸)". Second, We check up the database using other key words - '瘟㾮', '爲吉', '爲受鍼吉'. 1. AMFDM was used whenever Royal Family was cared. Futhermore, Its application method was as same as medical documents said. 2. AMFDM in the Seunjeongwon-Ilgi consists of Taboo-day(忌日) and Favor-day(吉日). Taboo-day is classified into following 5 type. Weather, Moon phases, The 24 solar terms(節氣), Spirit-location(人神), KunJie-12-deity(建除十二神) and OnHuang-day(瘟㾮日). 3. Sometime contradiction was occurred when AMFDM was used. So AMFDM had the priority order. According to these's order, doctor picked up a date. 4. Doctor used AMFDM to control Interval of treatment. They thought that acupuncture treatment exhaust one's Qi(氣). Using AMFDM, they could give recovery period to patient.

• Journal of Korean Clinical Nursing Research
• /
• v.21 no.3
• /
• pp.293-308
• /
• 2015

Purpose: This study aimed to develop nursing practice standards of hemodialysis care according to admission types. Methods: The standards were developed in four phases. Phase 1: The preliminary standards of hemodialysis care were developed based on literature review and evaluation of professional experts. Phase 2: Content validity was evaluated by 34 professional experts and the standards were modified and revised. Phase 3: Clinical validity was evaluated by 212 hemodialysis nurses. Expert group validated and verified the final outcome. Phase 4: Final standards of hemodialysis care according to admission types were developed. Results: The standard of hemodialysis care for out-patients included 5 standards, 9 contents, 43 nursing activities. The standard for in-patients included 6 standards, 10 contents, 50 nursing activities. The standards for critical patients included 4 standards, 10 contents, 43 nursing activities. There were differences in nursing activities according to admission type. Time required to meet the standards were different according to admission types. Conclusion: The findings of this research demonstrated that the time required for hemodialysis care and appropriate number of nurse would be different according to admission types. Different nursing workload according to admission type of hemodialysis patients need to be considered in allocating nursing manpower.

• Journal of the Korea Society for Simulation
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2007

Virtual manufacturing (VM) is a powerful technology for developing a new product, new equipment and new manufacturing system, and three-dimensional (3D) simulation is a core technology in VM. 3D simulation involves both mechanical simulation and discrete event simulation. This paper introduces a case study of implementing 3D simulation for developing an automatic assembly line in a Korean optical factory. This factory produces a lens module that is the part of a phone-camera. 3D simulation technology is applied from the early stage of development. In the conceptual design and the initial design phases for individual equipment, 3D mechanical simulation using $CATIA^{(R)}$ and $IGRIP^{(R)}$ is conducted. 3D discrete event simulation with $QUEST^{(R)}$ is applied to the detailed design of the equipment and of the whole system. The focus of the simulation is to verify the technical and economical feasibility of the new automatic system. As a result, the takt time is reduced to the quarter of the manual system, and the number of workers in a line is reduced tremendously.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.597-604
• /
• 2012

The present study assessed the $CO_2$ emissions of concrete according to the type and replacement ratio of supplementary cementitious materials (SCM) and concrete compressive strength using a comprehensive database including 2464 cement concrete specimens and 776 cement concrete mixes with different SCMs. The system studied in $CO_2$ assessment of concrete based on Korean lifecycle inventory was from cradle to pre-construction, which includes consistent materials, transportation and production phases. As the performance efficiency indicators, binder and $CO_2$ intensities were analyzed, and simple equations to evaluate the amount of $CO_2$ emission of concrete were then formulated as a function of concrete compressive strength and the replacement ratio of each SCM. Hence, the proposed equations are expected to be practical and useful as a guideline to determine the type and replacement ratio of SCM and unit content of binder in concrete mix design that can satisfy the target compressive strength and $CO_2$ reduction percentage relative to cement concrete.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.574-582
• /
• 2009

$UO_2$ microsphere particles, core material of HTGR(High Temperature Gas Reactor) nuclear fuel, were prepared using by the GSP(Gel Supported Precipitation) method which is a modified-method of the wet sol-gel process. The spherical shape of initial liquid ADU droplets from the vibration nozzle system was continuously kept till the conversion to the final $UO_2$ microsphere. But the size of a final $UO_2$ microsphere was shrunken to about 25% of an initial ADU droplet size. Also, we found that the composition of dried-ADU gel particles was constituted of the very complicated phases, coexisted the U=O, C-H, N-H, N-O, and O-H functional groups by FT-IR. The important factors for obtain the no-crack $UO_2$ microsphere during the thermal treatment processes must perfectly wash out the remained-$NH_4NO_3$ within the ADU gel particle in washing process and the selections of an appropriate heating rate at a suitable gas atmosphere, during the calcining of ADU gel particles, the reducing of $UO_3$ particles, and the sintering of $UO_2$ particles, respectively.