• Journal of Astronomy and Space Sciences
• /
• 제41권1호
• /
• pp.43-60
• /
• 2024

Korea Pathfinder Lunar Orbiter (KPLO) is South Korea's first space exploration mission, developed by the Korea Aerospace Research Institute. It aims to develop technologies for lunar exploration, explore lunar science, and test new technologies. KPLO was launched on August 5, 2022, by a Falcon-9 launch vehicle from cape canaveral space force station (CCSFS) in the United States and placed on a ballistic lunar transfer (BLT) trajectory. A total of four trajectory correction maneuvers were performed during the approximately 4.5-month trans-lunar cruise phase to reach the Moon. Starting with the first lunar orbit insertion (LOI) maneuver on December 16, the spacecraft performed a total of three maneuvers before arriving at the lunar mission orbit, at an altitude of 100 kilometers, on December 27, 2022. After entering lunar orbit, the commissioning phase validated the operation of the mission mode, in which the payload is oriented toward the center of the Moon. After completing about one month of commissioning, normal mission operations began, and each payload successfully performed its planned mission. All of the spacecraft operations that KPLO performs from launch to normal operations were designed through the system operations design process. This includes operations that are automatically initiated post-separation from the launch vehicle, as well as those in lunar transfer orbit and lunar mission orbit. Key operational procedures such as the spacecraft's initial checkout, trajectory correction maneuvers, LOI, and commissioning were developed during the early operation preparation phase. These procedures were executed effectively during both the early and normal operation phases. The successful execution of these operations confirms the robust verification of the system operation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권8호
• /
• pp.1117-1123
• /
• 2017

Objective: This study was conducted to compare growth performance, blood components and carcass traits by two feeding systems (concentrate with roughage separately [CON] vs total mixed ration [TMR]) in Hanwoo steers, and to learn the relationship between blood components during fattening or finishing phases and carcass traits in Hanwoo steers. Methods: Sixty steers aged 8 months were allotted to two feeding systems and fed similar amounts of average dry matter and total digestible nutrient throughout whole experimental period according to each feeding program. Steers were weighed monthly, taken blood at the end of growing, fattening and finishing periods, and slaughtered at 30 month of age. Results: Growing performance was higher (p<0.05) in the CON group compared to the TMR group during fattening and finishing periods. The CON group was lower (p<0.05) in blood aspartic acid transaminase, blood urea nitrogen and retinol levels during growing period, but higher in triglyceride and cholesterol levels during fattening and finishing periods compared to the TMR group. The CON group was greater (p<0.05) in rib-eye area, and lighter (p<0.05) red in meat color compared to the TMR group. In the correlation coefficients between blood components of steers and carcass traits, retinol had a negative (p<0.05) correlation with marbling score and rib-eye area. Leptin had a positive (p<0.05) correlation with back fat thickness. Blood cholesterol and triglyceride were positively (p<0.05) correlated with carcass weight and rib-eye area. Conclusion: Growth performance, carcass ribeye area and meat color showed a more desirable result in the CON compared to the TMR in Hanwoo steers. Assessing the accumulated data of carcass traits with blood components including hormones-particularly retinol, cholesterol, triglyceride, and leptin-during the fattening or finishing phases, it may be possible to find a biomarker for determining beef quality in living animals.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권3호
• /
• pp.388-395
• /
• 2009

The current study was conducted to investigate the effect of early feed restriction (FR, 8 to 14 d of age) on growth performance and immune function in broiler chickens. Birds were fed corresponding diets from 3 to 35 d of age, which consisted of three phases: starter (3 to 7 d of age), FR (8 to 14 d of age) and re-alimentation (15 to 35 d of age) phases. During the FR period, each group of birds was fed the basal diet ad libitum (CON), 85% (EN85) and 70% (EN70) of lower calorie diet ad libitum (qualitative FR), and 85% (FI85) and 70% (FI70) of voluntary intake on a daily basis (quantitative FR). As a result, there was no statistical difference in weight gain, feed intake and feed conversion ratio between the CON and quantitative or qualitative FR groups during the entire (3 to 35 d) periods. In particular, the EN85 group resulted in a significant (p<0.05) increase in weight gain compared with the EN70, FI85 and FI70 groups. Plasma total protein and albumin at 14 d of age (during FR) were significantly (p<0.05) lower in the quantitative and qualitative FR groups, but these parameters at 35 d of age (after re-alimentation) were higher (p<0.05) in the EN85 and EN70 groups than in the CON group. Plasma IgG level was unaffected by dietary FR procedure. In cytokines, there was no significant difference in the expression of lymphocytic IL-4 and IFN-${\gamma}$ at 14 d of age between the FR and the CON groups, whereas lymphocytic IL-6 and iNOS expression were significantly (p<0.05) lower in FI85 and FI70 groups. Moreover, lymphocytic iNOS was also significantly (p<0.05) lower in birds fed qualitative and quantitative diets compared with those fed ad libitum. In the thymus, IL-4 expression was higher (p<0.05) in FI85 and FI70 groups, whereas IL-6 expression was lower (p<0.05) in the FI85 and FI70 groups than in the CON group. Thymic iNOS was significantly (p<0.05) lower in birds fed qualitatively and quantitatively restricted diets compared with those fed ad libitum. At 35 d of age, there was no difference in the expression of IL-4, IL-6 and IFN-${\gamma}$ of lymphocytes and thymus between the FR and CON groups. In conclusion, 85% of quantitative and qualitative FR would have a beneficial effect on the expression of some cytokines including IL-4 and iNOS without change in growth performance of birds.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제26권1호
• /
• pp.84-92
• /
• 2020

To supply a stable amount of standard material to detect paralytic shellfish toxin (PST), we examined possible increases in toxic content in Alexandrium catenella and A. pacificum using a light emitting diode (LED), which is one of the most eco-friendly and economical lighting method. When comparing the growth rates of organisms and wavelengths of light used, the half saturation constants (Ks) of red wavelength were higher than those of other wavelengths. In contrast, the Ks of blue wavelength were lower than those of other wavelengths. Moreover, when comparing the toxic contents and wavelengths of light used, red wavelength produced approximately 8 times more toxic content in A. catenella and approximately 3.2 times more toxic content in A. pacificum than other wavelengths. Thus, the toxic content present in the organism might be closely related to the Ks of light. The optimum light source to be used to ensure economically ef ective and productive growth in an Alexandrium culture system (photo-bioreactor) would likely consist of a two-phase culture, wherein a blue LED is used during the lag and exponential phases to increase growth rates, followed by the use of a red LED during late exponential and stationary phases to achieve increased PST yields.

• Applied Chemistry for Engineering
• /
• 제26권6호
• /
• pp.698-705
• /
• 2015

Two series of symmetric dimesogenic compounds containing a butylene or 1-methylbutylene spacer as a flexible group were synthesized. The mesogenic groups of synthesized compounds consist of an azobenzene group with a terminal substituent. Chemical structures as well as, thermal, mesomorphic, and photochemical properties of the synthesized compounds were investigated using FT-IR, $^1H-NMR$, differential scanning calorimetry (DSC), polarizing optical microscopy (POM), and UV-visible spectrometry. P-H, P-F, and $P-OC_6H_{13}$ showed monotropic liquid crystal phases, whereas the others showed enantiotropic liquid crystal phases. Compounds with butylene group as a flexible spacer exhibited wider mesophase temperature ranges and higher thermal transition temperatures than compounds containing a 1-methylbutylene group. Compounds with a high absolute value of the Hammett substituent constant exhibited high thermal transition temperatures and improved stability in the liquid crystal phase. Furthermore, in the absence or presence of UV light illumination, terminal substituents of the azomesogenic group were important factors in deciding the maximum absorbance wavelength (${\lambda}_{max}$) and the rate of photoisomerization (K).

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제15권4호
• /
• pp.207-212
• /
• 2015

Background: The ideal alternative airway device should be intuitive to use, yielding proficiency after only a few trials. The Clarus Video System (CVS) is a novel optical stylet with a semi-rigid tip; however, the learning curve and associated orodental trauma are poorly understood. Methods: Two novice practitioners with no CVS experience performed 30 intubations each. Each trial was divided into learning (first 10 intubations) and standard phases (remaining 20 intubations). Total time to achieve successful intubation, number of intubation attempts, ease of use, and orodental trauma were recorded. Results: Intubation was successful in all patients. In 51 patients (85%), intubation was accomplished in the first attempt. Nine patients required two or three intubation attempts; six were with the first 10 patients. Learning and standard phases differed significantly in terms of success at first attempt, number of attempts, and intubation time (70% vs. 93%, $1.4 {\pm}0.7$ vs. $1.1{\pm}0.3$, and $71.4{\pm}92.3s$ vs. $24.6{\pm}21.9s$, respectively). The first five patients required longer intubation times than the subsequent five patients ($106.8{\pm}120.3s$ vs. $36.0{\pm}26.8s$); however, the number of attempts was similar. Sequential subgroups of five patients in the standard phase did not differ in the number of attempts or intubation time. Dental trauma, lip laceration, or mucosal bleeding were absent. Conclusions: Ten intubations are sufficient to learn CVS utilization properly without causing any orodental trauma. A relatively small number of experiences are required in the learning curve compared with other devices.

• The Journal of the Korea Contents Association
• /
• 제13권11호
• /
• pp.957-967
• /
• 2013

While a vast number of cad drawings are produced in the life cycle of construction projects from the planning, design, and construction phases to the maintenance and control phases, the creation and distribution of non-standard drawings make it difficult for the construction parties to communicate with one another and to recycle, maintain, and control drawings by project phase. The Korea standard of CAD drawing in construction CALS/EC, which stipulates the standard for construction CAD drawings, is based on roads, rivers, and railways in line- and unit-based structures, allowing the creation of standardized CAD drawings. Such standard, however, cannot be easily applied to construction projects with multiple facilities like harbors, housing sites, or lands consisting of surface forms. In particular, port field consist of complex docks and amenities located in a certain coastal area based on multiple objectives. They also contain the concept of housing sites, like background land, and are composed of various civil engineering facilities, construction facilities, and port field, so that the existing CAD drawing standard cannot be easily implemented. Therefore, the purpose of this study is to maximize the efficiency of the information related to drawing information and to ultimately support smooth information exchanges in construction design by conducting a development research on the expansion of the CAD drawing standard that meets the needs of port field.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• 제18권2호
• /
• pp.41-47
• /
• 2012

Background: This study was designed to investigate the correlation between electromyography (EMG) activities in the vastus medialis oblique (VMO) vs vastus lateralis (VL) activity ratio and the valgus collapse knee position while stepping down. Methods: Twenty healthy women volunteered to participate in this study. We measured the frontal-plane projections of the knee valgus angle, knee valgus distance, and hip adduction angle by using a digital camcorder. After 3 repetitions of the step down (dominant side) exercise, the findings of the static and dynamic phases were analyzed. EMG activities data of the VMO:VL activity ratio were recorded during the step down exercise and were normalized to the maximal voluntary isometric contraction (MVIC) of the quadriceps. A paired t-test was used to compare the findings of the static and dynamic phases. We analyzed the Spearman's rank order correlation coefficient between the and VMO:VL ratio. Results: Hip adduction angle, knee valgus angle, VMO activity, VL activity, VMO:VL activity ratio were statistically higher in the dynamic phase than in the static phase (p<.05). Frontal-plane projections of knee valgus angle were significantly correlated with hip adduction angle (r=.459, p<.05) and knee valgus distance (r=.505, p<.05). However, the EMG activity ratio of the VMO and the VL did not show a significant change during step down exercise with respect to hip adduction angle (p=.875), knee valgus angle (p=.618), and knee valgus distance (p=.701). Conclusion: The results from this study indicate that frontal-plane projections of knee valgus angle were associated with hip adduction angle and knee valgus distance. On the basis of these results, the knee valgus distance may be used to determine the valgus collapse knee position while stepping down.

• Sleep Medicine and Psychophysiology
• /
• 제8권1호
• /
• pp.59-66
• /
• 2001

Objectives: This study examined the effect of mood and personality characteristics on psychophysiological responses measured by a biofeedback system in a normal population. Methods: Fifty healthy volunteers without any history of medical or psychiatric illnesses participated in this study. We measured the Spielberger trait anxiety inventory, Beck depression inventory, and Eysenck personality questionnaires in these subjects. Using the J & J biofeedback system, we also measured skin temperature, electrodermal response, forearm and frontal electromyography (EMG)s in 3 experimental conditions of baseline, stress, and recovery phases. Results: Trait anxiety did not show any significant correlation with psychophysiological responses except stress response in forearm EMG levels(r=0.282, p<0.05). Depressed mood was negatively correlated with forearm EMG levels in baseline (r=-0.299, p<0.05) and recovery phases(r=-0.314, p<0.05). Subjects with relatively high levels of depressed mood showed different stress and recovery responses in frontal EMG levels compared with those with relatively low levels of depressed mood (F=4.26, p<0.05). Extroverted subjects showed higher levels of forearm EMG than introverted ones in stress phase. Conclusion: Mood and personality characteristics in healthy subjects are closely related with psychophysiological responses measured by a biofeedback system. We suggest that mood and personality characteristics should be considered as important variables in analyzing abnormal psychophysiological responses in some psychiatric patients.

• Investigative Magnetic Resonance Imaging
• /
• 제19권2호
• /
• pp.76-87
• /
• 2015

Purpose: There is an ongoing search for a stent material that produces a reduced susceptibility artifact. This study evaluated the effect of manganese (Mn) content on the MRI susceptibility artifact of ferrous-manganese (Fe-Mn) alloys, and investigated the correlation between MRI findings and measurements of Fe-Mn microstructure on X-ray diffraction (XRD). Materials and Methods: Fe-Mn binary alloys were prepared with Mn contents varying from 10% to 35% by weight (i.e., 10%, 15%, 20%, 25%, 30%, and 35%; designated as Fe-10Mn, Fe-15Mn, Fe-20Mn, Fe-25Mn, Fe-30Mn, and Fe-35Mn, respectively), and their microstructure was evaluated using XRD. Three-dimensional spoiled gradient echo sequences of cylindrical specimens were obtained in parallel and perpendicular to the static magnetic field (B0). In addition, T1-weighted spin echo, T2-weighted fast spin echo, and $T2^*$weighted gradient echo images were obtained. The size of the low-intensity area on MRI was measured for each of the Fe-Mn binary alloys prepared. Results: Three phases of ${\alpha}^{\prime}$-martensite, ${\gamma}$-austenite, and ${\varepsilon}$-martensite were seen on XRD, and their composition changed from ${\alpha}^{\prime}$-martensite to ${\gamma}$-austenite and/or ${\varepsilon}$-martensite, with increasing Mn content. The Fe-10Mn and Fe-15Mn specimens comprised ${\alpha}^{\prime}$-martensite, the Fe-20Mn and Fe-25Mn specimens comprised ${\gamma}+{\varepsilon}$ phases, and the Fe-30Mn and Fe-35Mn specimens exhibited a single ${\gamma}$ phase. The size of the low-intensity areas of Fe-Mn on MRI decreased relative to its microstructure on XRD with increasing Mn content. Conclusion: Based on these findings, proper conditioning of the Mn content in Fe-Mn alloys will improve its visibility on MR angiography, and a Mn content of more than 25% is recommended to reduce the magnetic susceptibility artifacts on MRI. A reduced artifact of Fe-Mn alloys on MRI is closely related to the paramagnetic constitution of ${\gamma}$-austenite and/or ${\varepsilon}$-martensite.