• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1611-1616
• /
• 2004

The objective of this study is to simulate the etching characteristics under different process parameters for the optimization of etching process. The etching characteristics such as the etching factor were investigated under different operating conditions and compared with the spray characteristics. The spray characteristics were measured by using Phase Doppler Anemometer. The correlation between the etching characteristics and the spray characteristics was analyzed to simulate the etching characteristics under the actual parameters of the etching process. The parameters were distance of nozzle tip and pipe pitch. To improve the uniformity and value of etching factor in the etching process, the process parameters should be designed optimally. The distribution of spray was simulated by the Monte-Carlo Method and the process parameters were optimized by the design of experiments(DOE).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.169-173
• /
• 2009

돌발홍수는 급격한 경사와 많은 불투수층을 포함하고 있는 좁은 지역에서 짧은 지속기간의 강우강도를 가진 큰 강우가 내리는 경우 발생한다. 이러한 돌발홍수가 발생할 수 있는 강우의 양을 파악하기 위해서 돌발홍수기준(Flash Flood Guidance)을 산정하여 활용하고 있다. 돌발홍수기준은 수문모형으로부터 도출되는 강우-유출관계곡선에서 한계유출량에 대응되는 강우량을 의미한다.따라서 강우-유출관계가 갖고 있는 불확실성(uncertainty)을 최소화 할수록 돌발홍수기준을 정확하게 산정할 수 있으며, 수문모형은 각각 고유의 매개변수와 특성을 갖고 있으므로 어떠한 수문모형을 사용하여 강우-유출관계를 도출하느냐에 따라 불확실성의 정도가 크게 좌우된다. 본 연구에서는 네 개의 수문모형(HEC-HMS 모형, 저류함수모형, SSARR 모형, TANK 모형)의 모의값에 Monte Carlo 모의 방법을 적용하여 네 개의 수문모형에 대한 신뢰구간을 추정하여 제시하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.7 s.124
• /
• pp.579-586
• /
• 2007

Analytical method to analyze the effect of tolerance on the modal characteristic of multi-body systems in dynamic equilibrium position is suggested in this paper. Monte-Carlo method is conventionally employed to perform the tolerance analysis. However, Monte-Carlo method spends too much time for analysis and has a greater or less accuracy depending on sample condition. To resolve these problems, an analytical method is suggested in this paper. Sensitivity equations for damped natural frequencies and the transfer function are derived at the dynamic equilibrium position. By employing the sensitivity information of mass, damping and stiffness matrices, the sensitivities of damped natural frequencies and the transfer function can be calculated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.109-114
• /
• 2007

Analytical method to analyze the effect of tolerance on the modal characteristic of multi-body systems in dynamic equilibrium position is suggested in this paper. Monte-Carlo Method is conventionally employed to perform the tolerance analysis. However, Monte-Carlo Method spends too much time for analysis and has a greater or less accuracy depending on sample condition. To resolve these problems, an analytical method is suggested in this paper. By employing the sensitivity information of mass, damping and stiffness matrices, the sensitivities of damped natural frequencies and the transfer function can be calculated at the dynamic equilibrium position. The effect of tolerance on the modal characteristic can be analyzed from tolerance analysis method.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.2
• /
• pp.341-358
• /
• 1998

The X-ray astronomy team of the Korea Astronomy Observatory(KAO) is planning to develop a multi-cell proportional counter, adopting an anti-coincidence method to reduce its internal background. We have developed a Monte Carlo code to determine the X-ray detection efficiency of the counter. As a check of our code, we successfully reproduced the detection efficiency of Ginga/LAC. In this paper, we report the simulation results for the counter being considered in KAO.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.247-252
• /
• 2000

In this paper, we discuss frequency allocation and sharing for high speed radio access network in domestic 5㎓ the band. In order to evaluate the possibility of frequency sharing between meterological radar and high speed radio access network we analyses radio interference of meterological radar by means of minimum coupling loss method and Monte Carlo simulation And simulations show that it is necessary to use DFS(Dynamic Frequency Selection) scheme for frequency sharing between meterological radar and high speed radio access network.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.6
• /
• pp.423-427
• /
• 1998

In this paper the electron mobility in $Ga{1-X}In_xAs$alloy semiconductors is simulated by using the ensemble Monte Carlo method. The simulations for Ga\ulcornerIn\ulcornerAs with In mole fraction, doping concentration and temperature as parameters are performed. The electron mobility for alloys which perfectly orderd alloys without the alloy scattering mechanism are assumed, the results show that mobility in Ga\ulcornerIn\ulcornerAs is improved by 11%, 12% and 7% for 0.25, 0.53 and 0.75. In mole fractions, respectively, We reported the theoretical results of electron mobility in $Ga{1-X}In_xAs$alloys, so those will contribute to the research and development into materials for high-speed semiconductor devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.630-635
• /
• 1993

In this paper, the Monte-Carlo method was applied to the controller robustness evaluation problems with respect to the uncertainty of critical plant parameters. The plant studied is a aerial vehicle. The-variable parameters are nondimensional stability derivatives, inertias. The nominal nondimensional stability derivatives ,were obtained from wind tunnel test. Also the nominal inertia parameters were calculated from the mass distribution along the vehicle axes. But the parameters obtained from the test or calculations are at best probable and always contain some uncertainties which one can not figure out. So some kinds of robustness evaluation method should be applied. The parametric robustness of the designed classical controller evaluated by the method turned out to be satisfactory.

• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.173-179
• /
• 2006

The Monte Carlo simulation code CEARPPU has been developed and updated to provide pulse pile-up correction spectra for high counting rate cases. For neutron activation analysis, CEARPPU correction spectra were used in library least-squares method to give better isotopic activity results than the convention library least-squares fitting with uncorrected spectra.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.268-273
• /
• 1997

In this paper the transient electron transport in GaAs bulk is simulated by using ensemble Monte Carlo method. To analyze the transient electron transport the 10000 electrons in the .GAMMA. valley are simulated simultaneously for 10 picoseconds. The electric field-velocity relation is obtained. The high impurity density reduces the negative differential resistance effect. The result of transient average velocity shows the electron velocity in the transient state is faster than that in the steady state. This transient velocity overshoot is caused by the intervalley scattering mechanism. And we confirmed the fact that the energy relaxation time is longer than the momentum relaxation time.