• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2001년도 Proceedings of 2001 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.14-22
• /
• 2001

The frequency responses on the sub-pixel evaluation technique were investigated using the Monte-calro Simulation technique. The frequency response by the FFT based cross-correlation gives very good results, however, the gain loss does exist for the small displacement, (less than 0.5 pixel). While, the no gain loss is observed in the Direct Cross-correlation, however, the sub-pixel accuracy was limited to be about 0.1 pixel, i.e., it could not detect the small displacement. To detect the higher accurate sub-pixel displacement, the gradient based technique is the best. For the small interrogation area (e.g., 4x4), only the gradient technique can detect the small displacement correctly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.643-648
• /
• 2001

The direct simulation Monte Carlo(DSMC) method is applied to investigate steady and unsteady flow fields of a single-stage disk-type drag pump. Two different kinds of pumps are considered: the first one is a rotor-rotor combination, and the second one is a rotor-stator combination. The pumping channels are cut on a rotor and stator. The rotor and stator have 10 Archimedes' spiral blades, respectively. In the present DSMC method, the variable hard sphere model is used as a molecular model, and the no time counter method is employed as a collision sampling technique. For simulation of diatomic gas flows, the Borgnakke-Larsen phenomenological model is adopted to redistribute the translational and internal energies. The DSMC results are in good agreement with the experimental data.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1394-1405
• /
• 2002

The performance of micro-actuators utilizing radiometric forces are studied numerically. The Knudsen number based on gas density and characteristic dimension is varied from near-continuum to highly rarefied conditions. Direct simulation Monte Carlo(DSMC) calculations have been performed to estimate the performance of the micro-actuators. In the present DSMC method, the variable hard sphere molecular model and no time counter technique are used to simulate the molecular collision kinetics. For simulation of diatomic gas flows, the Borgnakke-Larsen phenomenological model is adopted to redistribute the translational and internal energies.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1494-1500
• /
• 2004

A zero-dimensional direct simulation Monte Carlo(DSMC) model is developed for simulating diatomic gas including vibrational kinetics. The method is applied to the simulation of two systems: vibrational relaxation of a simple harmonic oscillator and translational-rotational-vibrational energy exchange process under heating and cooling. In the present DSMC method, the variable hard sphere molecular model and no time counter technique are used to simulate the molecular collision kinetics. For simulation of diatomic gas flows, the Borgnakke-Larsen phenomenological model is adopted to redistribute the translational and internal energies.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.119-127
• /
• 2010

본 논문에서는 탄산화 콘크리트 구조물의 내구성을 예측하기 위한 새로운 접근 방법을 제시하였다. 제시된 예측 방법은, 새로운 계측 데이터가 있을 때 베이스 이론에 근거하여 지속적인 업데이팅이 가능하며 모델 매개변수의 확률론적인 특성이 고려된다. 탄산화 내구성 해석 모델의 절차는 라틴 하이퍼큐브 샘플 추출법(LHS)으로 간단하게 정리되고, 이를 통해 얻는 표본으로 결정된다. 이 방법은 콘크리트 구조물의 설계에 유용하게 사용될 수 있으며, 모니터링을 통한 콘크리트 구조물의 잔존수명을 예측할 수 있다. 본 논문에서 사전예측치는 탄산화에 노출된 국내 콘크리트 구조물 데이터(3700개 시편)를 이용하여 콘크리트 탄산계수의 확률 특성을 고려하여 나타내었으며, 우도함수는 현장 모니터링 데이터를 이용하였으며 사후예측치는 사전예측치와 우도함수를 조합하여 나타내었다. 또한, 몬테 카를로 시뮬레이션(MCS)과 LHS의 비교를 통하여 본 논문에서 수행된 LHS를 이용한 샘플링기법이 보다 효율적인 시뮬레이션 수행이 가능함을 확인하였다.

• 한국콘텐츠학회논문지
• /
• 제15권7호
• /
• pp.282-288
• /
• 2015

몬테카를로 기법을 기반으로 한 모의실험을 통해 방사성 핵종별 주사기 차폐기구의 재질 및 두께에 대한 차폐분석 결과, 텅스텐, 납, 비스무스와 같이 상대적으로 원자번호가 높은 재질의 경우 거의 모든 핵종에서 가장 높은 차폐효과를 보였다. 그러나 $^{18}F$, $^{67}Ga$, $^{111}In$ 선원의 경우, 차폐두께가 낮은 영역에서 저 원자번호 재질보다 더 높은 에너지를 나타냈으나, 이후 증가된 차폐두께에서는 투과되어 도달하는 감마선이 감소하여 더 낮은 에너지 분포를 나타냈다. 그 외 상대적으로 원자번호가 낮은 재질의 경우 구리, 철, 스테인리스강, 황산바륨의 순서로 에너지가 낮은 분포를 나타냈고, 알루미늄, 플라스틱, 콘크리트, 물의 경우 핵종별로 각기 다른 양상을 나타냈으며, 상대적으로 투과된 감마선의 증가로 전체적으로 높은 에너지 분포를 보여 차폐효과가 떨어지는 것으로 나타냈다.

• 설비공학논문집
• /
• 제25권2호
• /
• pp.70-78
• /
• 2013

Plants which are having conditions of high temperature and pressure always are exposed to danger. In order to prevent unexpected accidents, safety management that can effectively and appropriately examine facilities is required in plant operation. RBI(Risk-Based Inspection) technology in API 581 is one of standard management technique for evaluating risk on petroleum plants. There are qualitative and quantitative assessments in RBI methodology. Quantitative evaluation step is complex and required much information, so high-risk facilities in plant are selected firstly by qualitative method. Qualitative RBI is performed by choosing the answer in prepared questionnaire. However, it is difficult to believe thoroughly results from survey including ambiguous information. In this study, the procedure of qualitative RBI analysis with considering probability distribution concept were proposed by using Monte Carlo simulation method in order to increase reliability in spite of uncertain factors. In addition, qualitative risk of cooling system for LNG plant was evaluated using proposed procedure. Although 20 items of total 39 assessment items are applied to uncertain factors, risk section of high probability(89%) were verified. The detailed results were described in manuscript.