• 제목/요약/키워드: Monostatic

검색결과 53건 처리시간 0.021초

유전체 장벽 방전 플라즈마의 Monostatic 레이다 단면적 측정 (Monostatic RCS Measurement for Dielectric Barrier Discharge Plasma)

  • 이현재;정인균;하정제;신웅재;양진모;이용식;육종관
    • 한국전자파학회논문지
    • /
    • 제27권3호
    • /
    • pp.246-252
    • /
    • 2016
  • 본 논문에서는 유전체 장벽 방전(dielectric barrier discharge: DBD) 플라즈마에 의한 monostatic RCS 감소 특성을 측정하였다. Monostatic 레이다 단면적(radar cross section: RCS) 교정을 위하여 서로 다른 크기의 금속 평판을 사용하여 산란계수(scattering parameter)를 측정하였고, 그 결과 0.4 dB 이내의 오차를 보였다. DBD 플라즈마에 의한 monostatic RCS 감소 특성을 측정하기 위해 DBD 플라즈마 발생기 뒤에 금속 평판을 배치하였다. 금속 평판과 플라즈마 발생기 사이에 아크 방전(arc dischrage)이 일어나는 것을 방지하기 위해 금속 평판과 DBD 플라즈마 사이의 간격을 띄워 측정을 진행하였다. 그 결과 7.4 GHz에서 monostatic RCS가 최대 약 3 dB 감소하였다.

능동 소나망의 표적 탐지 성능 비교 (Comparison of Active Sonar Systems in Target Positioning Performance)

  • 박치현;홍우영;고한석
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2002년도 춘계종합학술대회
    • /
    • pp.159-162
    • /
    • 2002
  • 본 논문에서는 능동 소나망의 구성 방법 및 관측 오차에 따른 위치 추정 성능에 대해서 다룬다. 능동소나는 구성 방법에 따라서 크게 Monostatic, Bistatic, Multisatic으로 분류될 수 있으며, 각각의 오차에 대한 특성이 서로 다르다. 본 논문에서는 각 수신기가 거리합 정보와 방위각 정보를 얻을 수 있다는 가정하에 LS를 이용한 Multisatic 소나망 정보의 융합 방법을 제안하였으며, Monostatic, Bistatic 소나망과 비교를 수행하였다. 모의 실험 결과 Multistatic 소나망의 위치 추정 RMSE가 Monostatic, Bistatic 소나망에 비해 약 57% 우수했다.

  • PDF

모노스태틱 RCS와 바이스태틱 RCS의 표적 구분 성능 분석 (Performance Comparison for Radar Target Classification of Monostatic RCS and Bistatic RCS)

  • 이성준;최인식
    • 한국전자파학회논문지
    • /
    • 제21권12호
    • /
    • pp.1460-1466
    • /
    • 2010
  • 본 논문은 바이스태틱 RCS와 모노스태틱 RCS를 이용하여 각각 표적 구분 실험을 수행하고 그 성능을 비교 분석하였다. 모노스태틱 및 바이스태틱 RCS로부터 특성을 추출하기 위하여 시간-주파수 영역 해석법인 STFT와 CWT를 이용하였으며, 다중 퍼셉트론 신경망을 구분기로 이용하였다. 실험 결과, 모노스태틱과 바이스태틱 RCS 모두 CWT가 STFT보다 더 나은 구분 성능을 보여주었다. 또한, STFT에서는 바이스태틱 RCS를 이용했을 때, CWT에서는 모노스태틱 RCS를 이용하였을 때 대체적으로 더 좋은 성능을 나타내었다. 결과적으로 본 논문을 통하여 바이스태틱 RCS도 모노스태틱 RCS처럼 표적 구분에 똑같이 적용할 수 있다는 것을 알 수 있었다.

ISAR 영상을 이용한 효과적인 편대비행 표적식별 연구 (A Study on Effective Identification of Targets Flying in Formation ISAR Images)

  • 차상빈;최인오;정주호;박상홍
    • 대한임베디드공학회논문지
    • /
    • 제17권1호
    • /
    • pp.67-76
    • /
    • 2022
  • Monostatic/Bistatic inverse synthetic aperture radar (ISAR) images are two-dimensional radar cross section (RCS) distributions of a target. When there are many targets in a single radar beam, ISAR images are generated with targets overlapped, so it is difficult to perform the targets identification using the trained database. In addition, it is inefficient to perform target identification using only single monostatic and bistatic ISAR images separately because each method has its own advantages and weaknesses. Therefore, this paper analyzes multiple targets identification performances using monostatic/bistatic ISAR images and proposes a method of identification through fusion of two ISAR images. To identify multiple targets, we use image combination technique using trained single target images. Simulation results show effectiveness of proposed method.

모노스태틱/바이스태틱 ISAR 영상 융합을 통한 표적식별 연구 (Radar Target Recognition Using a Fusion of Monostatic/Bistatic ISAR Images)

  • 차상빈;윤세원;황석현;김민;정주호;임진환;박상홍
    • 한국정보기술학회논문지
    • /
    • 제16권12호
    • /
    • pp.93-100
    • /
    • 2018
  • 역합성 개구 레이다(Inverse Synthetic Aperture Radar:ISAR) 영상은 표적의 2차원 RCS(Radar Cross Section) 분포를 나타낸다. 레이더의 LOS(Line Of Sight) 방향으로 진행하는 표적에 대해 바이스태틱 ISAR는 영상의 수직 해상도를 얻을 수 없는 모노스태틱 ISAR의 약점을 보완할 수 있다. 그러나 바이스태틱 ISAR는 모노스태틱 ISAR 비해 긴 처리 시간과 다양한 산란 메커니즘을 가지고 있기 때문에, 바이스태틱 ISAR 영상만을 이용한 표적식별은 비효율적일 수 있다. 이에 본 논문에서는 레이더의 LOS 방향으로 진행하는 표적의 모노스태틱, 바이스태틱 ISAR 영상을 이용하여 표적 식별 성능을 분석하고, 두 레이다의 융합을 통한 표적식별 방법을 제시한다. 시뮬레이션 결과, 융합을 통한 식별 성능이 모노스태틱, 바이스태틱 ISAR 영상만을 이용한 식별 성능보다 더 효율적임을 확인할 수 있었다.

양상태-단상태 변환 기반 잠수함 양상태 표적강도 해석 (Submarine bistatic target strength analysis based on bistatic-to-monostatic conversion)

  • 김국현;박성주;이근화;조대승
    • 한국음향학회지
    • /
    • 제43권1호
    • /
    • pp.138-144
    • /
    • 2024
  • 본 논문에서는 잠수함 양상태 표적강도 해석을 위한 양상태-단상태 변환 기법을 제안하였다. 이 기법은 송신 음원이 수중 표적면에 의해 산란된 후 수신자에 도달하는 음파 전달 경로 길이를 산정하고, 이에 상응하는 가상 산란면을 생성함으로써, 수중 표적의 표적강도 문제를 양상태에서 단상태로 변환하는 방법이다. 변환된 단상태 표적강도 문제는 기 정립된 단상태 표적강도 수치 해석 기법을 활용하여 양상태 표적강도를 평가한다. 표적강도 표준모델로 활용되고 있는 BeTTSi에 대한 양상태 표적강도 해석을 수행하였으며, 그 결과는 경계 요소법과 키르히호프 근사에 의한 해석 결과와 비교하여 제안된 해석 기법의 신뢰성과 잠수함 표적강도 평가 도구로서의 실무 활용성을 확인하였다.

Monostatic RCS Reduction by Gap-Fill with Epoxy/MWCNT in Groove Pattern

  • Choi, Won-Ho;Jang, Hong-Kyu;Shin, Jae-Hwan;Song, Tae-Hoon;Kim, Jin-Kyu;Kim, Chun-Gon
    • Journal of electromagnetic engineering and science
    • /
    • 제12권1호
    • /
    • pp.101-106
    • /
    • 2012
  • In this study, we investigated the effect of groove pattern and gap-fill with lossy materials at 15 GHz frequency of Ku-band. We used Epoxy/MWCNT composite materials as gap-fill materials. Although epoxy does not have an absorbance capability, epoxy added conductive fillers, which are multi-walled carbon nanotubes (MWCNT), can function as radar absorbing material. Specimens were fabricated with different MWCNT mass fractions (0, 0.5, 1.0, 2.0 wt%) and their permittivity in the Ku-band was measured using the waveguide technique. We investigated the effect of gap-fill on monostatic RCS by calculating RCS with and without gap-fill. For arbitrarily chosen thickness and experimentally obtained relative permittivity, we chose the relative permittivity of MWCNT at 2 wt% (${\varepsilon}_r$=8.8-j2.4), which was the lowest reflection coefficient for given thickness of 3.3 mm at V-pol. and $80^{\circ}$ incident angle. We also checked the monostatic RCS and the field intensity inside the groove channel. In the case of H-pol, gap-fill was not affected by the monostatic RCS and magnitude was similar with or without gap-fill. However, in the case of V-pol, gap-fill effectively reduced the monostatic RCS. The field intensity inside the groove channel reveals that different RCS behaviors depend on the wave polarizations.

능동 소나 위치 추정 성능 비교 및 최적 수신망 배치 (Comparison of Active Sonar Target Positioning Performance and Optimal Sensor Arrangement)

  • 박치현;홍우영;고한석;김인익
    • 한국음향학회지
    • /
    • 제22권3호
    • /
    • pp.224-232
    • /
    • 2003
  • 본 논문에서는 능동 소나의 구성 방법 및 관측 오차에 따른 위치 추정 성능에 대해서 다룬다. 능동 소나는 구성 방법에 따라서 크게 단상태 (Monostatic) 소나, 양상태 (Bistatic) 소나, 다중상태 (Multistatic) 소나로 분류될 수 있으며, 각각의 오차에 대한 특성이 서로 다르다 각 수신기가 거리 정보와 방위 정보를 얻을 수 있다는 가정하에 단상태, 양상태 소나와 다중상태 소나의 위치 추정 성능에 대해 비교해 보고 기존의 정보 융합 방법인 최소 자승법 (LS: Least square)에 가중치를 주는 가중치 최소 지승법 (WLS: Weighted least square)을 제안하였다. 또한, 제안된 방법을 이용하여 수신기의 수, 송수신기간 거리와 위치 추정 성능과의 연관성에 대하여 알아보고 효과적인 다중상태 소나 배치에 대한 연구를 수행하였다. 모의 실험결과 다중상태 소나의 위치 추정 제곱근 오차평균이 단상태 소나에 비해 약 35.98%, 양상태 소나에 비해 약 37.45% 우수한 것을 볼 수 있었으며 WLS가 LS에 비해 평균 7.4% 우수한 성능을 나타내었고 각 센서에 입력되는 정보의 분산 차가 클수록 성능 향상율이 증가하는 경향을 보였다.

모노스태틱 등가 모델을 활용한 바이스태틱 SAR 영상 형성에 관한 연구 (Bistatic Synthetic Aperture Radar Imaging Using a Monostatic Equivalent Model)

  • 유보현;강병수;이명준;김경태
    • 한국전자파학회논문지
    • /
    • 제29권9호
    • /
    • pp.693-700
    • /
    • 2018
  • 본 논문에서는 송신 레이다와 수신 레이다가 분리된 바이스태틱(bistatic) 환경에서 합성 개구면 레이다(synthetic aperture radar: SAR) 영상을 형성하는 기법에 관하여 서술한다. 바이스태틱 SAR는 모노스태틱(monostatic) SAR에 비해 다양한 SAR 영상 획득 시나리오를 형성할 수 있기 때문에 기존의 모노스태틱 SAR의 한계를 극복할 수 있다. 그러나 현재까지 국내에서 바이스태틱 SAR 영상 형성과 관련된 연구가 매우 미진한 상황이다. 이에 따라 본 논문에서는 바이스태틱 기하구조에서의 레이다 수신 신호를 모델링하고, 이를 모노스태틱 등가 모델(equivalent model)을 활용하여 바이스태틱 SAR 영상을 형성하는 방법에 관하여 서술한다. 본 논문에서는 바이스태틱 기하구조에서의 모의시험을 통해 본 논문에서 서술된 바이스태틱 SAR 영상 형성 기법의 효용성을 검증한다.

Adaptive Filtering Processing for Target Signature Enhancement in Monostatic Borehole Radar Data

  • Hyun, Seung-Yeup;Kim, Se-Yun
    • Journal of electromagnetic engineering and science
    • /
    • 제14권2호
    • /
    • pp.79-81
    • /
    • 2014
  • In B-scan data measured by a pulse-type monostatic borehole radar, target signatures are seriously obscured by two clutters that differ in orientation and intensity. The primary clutter appears as a nearly constant time delay, which is caused by internal ringing between antenna and transceiver in the radar system. The secondary clutter occurs as an oblique time delay due to the guided borehole wave along the logging cable of the radar antenna. This issue led us to perform adaptive filtering processing for orientation-based clutter removal. This letter describes adaptive filtering processing consisting of a combination of edge detection, data rotation, and eigenimage filtering. We show that the hyperbolic signatures of a dormant air-filled tunnel target can be more distinctly enhanced by applying the proposed approach to the B-scan data, which are measured in a well-suited test site for underground tunnel detection.