• Polymer Science and Technology
• /
• v.9 no.3
• /
• pp.193-199
• /
• 1998

• Polymer Science and Technology
• /
• v.8 no.4
• /
• pp.384-390
• /
• 1997

• Bulletin of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.31-32
• /
• 2007

• Corrosion Science and Technology
• /
• v.8 no.5
• /
• pp.197-202
• /
• 2009

The high toxicity of wax, oil, varnish and volatile corrosion inhibitor(VCI) corrosion inhibitors lead to an increasing interest in using non-toxic alternatives such as anti-corrosive film. This study aims to investigate the possibility to use acryl based anti-corrosive film as a substitution of toxic corrosion inhibitors. Acryl emulsions were polymerized by several acryl monomers(acrylonitrile(AN), n-butyl acrylate(nBA), methylmethacrylate(MMA) and glycycyl methacrylate(GMA)), non-toxic corrosion inhibitor, crosslinking agents(diethylene glycol dimethacrylate(DEGDA)) and various additives in order to apply substrate of anti-corrosive film. Acryl emulsion for anti-corrosive film(AeACF) as a substrate of corrosion inhibitor film has excellent removal characteristic at above $25^{\circ}C$. The crosslinked by DEGDA in a range of above 4 wt% content anti-corrosive film can easily remove from the metal surface by using hands because it kept a balance of cohesion and adhesion strength. Anti - corrosive performance of AeACF is better than anti-corrosive oil by corrosion rate test, which was measured $54.3mg/dm^2$ day(MDD) and $142.9mg/dm^2$ day, respectively. Anti-corrosive film consisting of acryl monomers and inorganic anti-corrosive ingredients did not emit any toxic pollutants by gas chromatography. Thus it is estimated that acryl based anti-corrosion film can substitute toxic corrosion inhibitors.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.801-807
• /
• 1994

Lactose substituted styrene monomer, N-(p-vinylbenzyl)-D-lactonamide(VLA) was prepared by coupling the lactose lactone with p-vinylbenzylamine. The carboxyl group of biotin was activated with N-hydroxysuccinimide in the presence of N, N'-dicyclohexylcarbodiimide. Subsquently, biotin substituted styrene monomer, N-(p-vinylbenzyl)-biotinamide(VBA) was prepared by amidation of the activated biotin with p-vinylbenzylamine. Poly(vinylbenzylactonamide-co-vinylbenzylbiotinamide), p(VLA-co-VBA) were synthesized through radical polymerization from the synthetic monomers(VLA-VBA) by using various mole ratio. The percentages of yield were 67~71%. The copolymers were found amphlphilic which had hydrophilic lactose, hydrophobic vinylbenzyl and biotin site within the structure. IR and $^{13}C-NMR$ analysis on the monomers and copolymer were carried out.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.2
• /
• pp.191-199
• /
• 2005

Removable protective adhesives for automobiles were synthesized by an emulsion polymerization of monomers such as n-butyl acrylate (BA), n-butyl methacrylate (BMA), acrylonitrile (AN), acrylic acid (AA) and 2-hydroxyethyl methacrylate (2-HEMA), in which AA and 2-HEMA were functional monomers. Potassium persulfate (KPS) was used as an initiator and sodium lauryl sulfate (SLS) was used as an emulsifier, and polyvinyl alcohol (PVA) was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch type reactor. Tensile strength, extension, peel strength, viscosity and solid content of the synthesized adhesives were tested. The optimum physical properties of the removable protective adhesives for automobiles were obtained with the composition of 0.43 mole BA, 0.57 mole AN, 0.21 mole BMA, 0.03 mole AA, and 0.03 mole 2-HEMA.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.533-540
• /
• 2007

We designed and successfully synthesized UV curable, functional acrylate monomers having a polarizing group, i.e., an electron-withdrawing and/or electron-donating group for the optical materials of high refractive index. Optical polymer films made from the functional methacrylate monomers were achieved with photo crosslinking under UV illumination. A monomer having amino and cyano groups (Dimer-CN) exhibited the highest refractive index ($n_{TE}$=1.595 at 850nm) among the studied methacrylate derivatives, due to the large polarizability of the dipolar monomer structures with electron-donating and withdrawing groups. By controlling the compositions of the functional acrylate monomer of copolymers, the refractive indices of the polymers were readily adjusted within a wide range of 1.498-1.595. The copolymers showed a high glass transition temperature $(T_g)$ and good thermal stability, which are desirable for optical applications. $T_g$ and $T_{10%}$ (10%-weight loss occurred) of the copolymers ranged from $120-140^{\circ}C$ and from $329-387^{\circ}C$, respectively.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.1003-1009
• /
• 2009

Copolymers of N-vinylpyrrolidone (NVP) comonomer with styrene (St), hydroxypropyl methacrylate (HPMA) and carboxyphenyl maleimide (CPMI) were synthesized by free radical polymerization using 2,2'-azobisisobutyronitrile (AIBN) initiator in 1,4-dioxane solvent. The copolymers formed were characterized by FTIR, $^1H$ NMR and $^{13}C$ NMR techniques and their thermal properties were studied by DSC and TGA. Copolymer composition was determined by $^1H$ NMR and/or by elemental analysis and monomer reactivity ratios (MRR) were estimated by the linear methods of Kelen-Tudos (K-T) and extended Kelen-Tudos (EK-T) and the non-linear approach. Copolymers of St and HPMA with NVP formed blocks of one of the monomer units, whereas alternating copolymers were obtained in CPMI-NVP, depending upon the side chain substitution. The MRR values are discussed in terms of monomer structural properties such as electronegativity and electron delocalization. The sequence distribution of monomers in the copolymers was studied by statistical method based on the average reactivity ratios obtained by EK-T method.

• Journal of the Optical Society of Korea
• /
• v.18 no.6
• /
• pp.753-761
• /
• 2014

We propose a two-step UV irradiation procedure to fabricate polymer-dispersed liquid crystal (PDLC) films by lamination. During the first UV treatment, before lamination, the UV-curable monomers coated on one film substrate are solidified through photo-polymerization as the phase separation between the liquid crystals and the monomers. Introducing an adhesion-enhancement layer on the other plastic substrate and controlling the UV irradiation conditions ensure that UV-induced cross-linkable functional groups remain on the surfaces of the photo-polymerized layers. Thereby, the adhesion stability between the top and bottom films is much improved during a second (post-lamination) UV treatment by further UV-induced cross-linking at the interface. Because the adhesion-enhancement and PDLC layers prepared by the bar-coating process are solidified before lamination, the PDLC droplet distribution and the cell gap between the two plastic substrates remain uniform under the lamination pressure. This ensures that the voltage-controlled light transmittance is uniform across the entire sample.

• Journal of the Korean Ceramic Society
• /
• v.55 no.2
• /
• pp.126-134
• /
• 2018

Using aqueous solution free radical polymerization with glacial acrylic acid (GAA), maleic anhydride (MA) and sodium methallyl disulfonate (SMADS), a novel linear polycarboxylate dispersant was synthesized for ceramics. Dispersant linear structural characterization was done by FTIR, $^1H$ NMR, HPLC and GPC, and the ratio of monomers was determined using an orthogonal experiment. This research is focused on the effects of polymerization temperature, monomer mole ratios and dosage of initiator on ceramic slurry viscosity with linear polycarboxylate dispersant for ceramic dosage rate of 0.30% (based on dry slurry), all of which were investigated by single factor test. The best polymerization conditions for linear GAA-MA-SMADS are when n(AA) : n(MA) : n(SMADS) equals 3.0 : 1.0 : 0.5, the molecular weight of the polymer is 4600 daltons, the initiator sodium persulfate accounts for 7% of the total mass of polymerized monomers, the polymerization temperature is $90^{\circ}C$ and the reaction time is 2 h. The ceramic body slurry viscosity drops from $820mPa{\cdot}s$ to $46mPa{\cdot}s$ when the concentration of the polycarboxylate dispersant is 0.30%.