• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.109-114
• /
• 2016

용매열합성법과 하소 과정으로 이루어진 두 단계 공정을 통해 단분산된 마이크로 크기의 구형 $ZnGa_2O_4$ 입자를 합성하였다. 합성된 3차원 구조의 구형 $ZnGa_2O_4$ 입자는 핵 생성과정에서 발생된 $ZnGa_2O_4$ 핵들이 자기 조립에 의해 형성된다. 이렇게 3차원 구조의 입자를 형성하는 원리인 '핵 성성'과 '자기 조립' 과정은 계면활성제인 PEG(polyethylene glycol)의 영향을 받는다. 그 이유는 계면활성제인 PEG의 농도가 임계응집농도(critical aggregation concentration)를 결정짓기 때문이다. 그리고 $ZnGa_2O_4$ 단상 합성을 위해 원료인 zinc acetate의 양을 조절했으며, 최적의 하소 조건을 결정하고자 TG-DTA를 통해 열적 거동을 확인했다. 또한 열처리 전 모체와 $900^{\circ}C$에서 1시간의 열처리 과정을 거친 산화물을 구성하는 작용기의 변화를 규명하기 위해 FT-IR을 측정하였다.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.362-367
• /
• 2012

Magnetite nanoparticles(NPs) have been the subject of much interest by researchers owing to their potential use as magnetic carriers in drug targeting and as a tumor treatment in cases of hyperthermia. However, magnetite nanoparticles with 10 nm in diameter easily aggregate and thus create large secondary particles. To disperse magnetite nanoparticles, this study proposes the infiltration of magnetite nanoparticles into hybrid silica aerogels. The feasible dispersion of magnetite is necessary to target tumor cells and to treat hyperthermia. Magnetite NPs have been synthesized by coprecipitation, hydrothermal and thermal decomposition methods. In particular, monodisperse magnetite NPs are known to be produced by the thermal decomposition of iron oleate. In this study, we thermally decomposed iron acetylacetonate in the presence of oleic acid, oleylamine and 1,2 hexadecanediol. We also attempted to disperse magnetite NPs within a mesoporous aerogels. Methyltriethoxysilicate(MTEOS)-based hybrid silica aerogels were synthesized by a supercritical drying method. To incorporate the magnetite nanoparticles into the hybrid aerogels, we devised two methods: adding the synthesized aerogel into a magnetite precursor solution followed by nucleation and crystal growth within the pores of the aerogels, and the infiltration of magnetite nanoparticles synthesized beforehand into aerogel matrices by immersing the aerogels in a magnetite nanoparticle colloid solution. An analysis using a vibrating sample magnetometer showed that approximately 20% of the magnetite nanoparticles were well dispersed in the aerogels. The composite samples showed that heating under an inductive magnetic field to a temperature of $45^{\circ}C$ is possible.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.8.1-8.1
• /
• 2011

Nanocrystalline titanium dioxide ($TiO_2$) materials have been widely used as an electron collector in DSSC. This is required to have an extremely high porosity and surface area such that the dye can be sufficiently adsorbed and be electronically interconnected, resulting in the generation of a high photocurrent within cells. In particular, their geometrical structures and crystalline phase have been extensively investigated as important issues in improving its photovoltaic efficiency. In this study, we present a new strategy to fabricate a photoelectrode having a periodic structured $TiO_2$ film templated from 1D or 3D polystyrene (PS) microspheres array. Monodisperse PS spheres of various radiuses were used for colloidal array on FTO glasses and two types of photoelectrode structures with different $TiO_2$ materials were investigated respectively. One is the igloo-shaped electrode prepared by $TiO_2$ deposition by RF-sputtering onto 2D microsphere-templated substrates. At the interface between the film and substrate, there are voids formed by the decomposition of PS microspheres during the calcination step. These holes might be expected to play the predominant roles as scattering spherical voids to promote a light harvesting effect, a spacious structure for electrolytes with higher viscosity and effective paths for electron transfer. Additionally the nanocrystalline $TiO_2$ phase prepared by the RF-sputtering method was previously reported to improve the electron drift mobility within $TiO_2$ electrodes. This yields solar cells with a cell efficiency of 2.45% or more at AM 1.5 illumination, which is a very remarkable result, considering its $TiO_2$ electrode thickness (<2 ${\mu}m$). This study can be expanded to obtain higher cell efficiency by higher dye loading through the increase of surface area or multi-layered stacking. The other is the inverse opal photonic crystal electrode prepared by titania particles infusion within 3D colloidal arrays. To obtain the enlargement of ordered area and high quality of crystallinity, the synthesis of titania particles coated with a organic thin layer were applied instead of sol-gel process using the $TiO_2$ precursors. They were dispersed so well in most solvents without aggregates and infused successfully within colloidal array structures. This ordered mesoporous structure provides the large surface area leading to the enough adsorption of dye molecules and have an light harvesting effect due to the photonic band gap properties (back-and-forth reflection effects within structures). A major advantage of this colloidal array template method is that the pore size and its distribution within $TiO_2$ photoelectrodes are determined by those of latex beads, which can be controlled easily. These materials may have promising potentials for future applications of membrane, sensor and so on as well as solar cells.

• 한국입자에어로졸학회지
• /
• 제15권4호
• /
• pp.191-202
• /
• 2019

In this study, performance (particle removal efficiency and breathing resistance) of several commercially available face masks (electrostatic filter masks (KF80 certified), a nanofiber filter mask (KF80 certified), and an uncertified mask) with their filter structure and composition were evaluated. Also, effects of relative humidity (RH) of incoming air, water and alcohol exposure, and reusability on performance of face masks were examined. Monodisperse and polydisperse sodium chloride particles were used as test aerosols. Except the uncertified mask filter, PM_2.5 removal efficiency was found to be higher than 90%, and the nanofiber filter mask had the highest quality factor due to the low pressure drop and high removal efficiency (nanofibers were arranged in a densely packed pore structure and contained a significant amount of fluorine in addition to carbon and oxygen). In the case of the KF80 certified mask, the removal efficiency was little affected when the RH of incoming air increased. When the mask filters were soaked in water, the removal efficiency of mask filters was degraded. In particular, the uncertified mask filter showed the highest removal efficiency degradation (26%). When the mask was soaked in alcohol, the removal efficiency also decreased with the greater degree than the water soaking case. The nanofiber mask filter showed the strongest resistance to alcohol exposure among tested mask filters. During evaluation of reusability of masks in real life, the removal efficiency of certified mask filter was less than 4% for 5 consecutive days (2 hours per day), while the removal efficiency of uncertified mask filter significantly decreased by 30% after 5 days.

• 펄프종이기술
• /
• 제34권5호
• /
• pp.18-38
• /
• 2002

A previous study on the model coatings based on latex-bound plastic pigment coatings (1) has been extended to latex-bound No. 1 clay, ultra-fine ground calcium carbonate (UFGCC), and clay-carbonate pigment mixture coatings, which are being widely used in the paper industry. The latex binder used was a good film-forming, monodisperse S/B latex or 0.15$\mu\textrm{m}$. No. 1 clay was representative of plate-like pigment particles, whereas UFGCC was of somewhat rounded rhombohedral pigment particlel. Both of them had negatively skewed triangular particle size distributions having the mean particle suet of 0.7${\mu}{\textrm}{m}$ and 0.6$\mu\textrm{m}$, respectively. Their packing volumes were found to be 62.5% and 657%, respectively. while their critical pigment volume concentrations (CPVC's) were determined to be 52.7% and 50.5% ( average of 45% caused by the incompatibility and 55.9% extrapolated) by coating porosity, respectively. Each pigment/latex coating system has shown its unique relationship between coating properties and pigment concentrations, especially above its CPVC. Notably, the clay/latex coating system hat shown higher coating porosity than the UFGCC/latex system at high pigment concentrations above their respective CPVC's. It was also found that their coating porosity and gloss were inter-related to each other above the CPVC's, as predicted by the theory. More interestingly, the blends of these two pigments have shown unique rheological and coating properties which may explain why such pigment blends are widely used in the industry. These findings have suggested that the unique structure of clay coatings and the unique high-shear rheology of ground calcium carbonate coatings can be judiciously combined to achieve superior coatings. Importantly, the low-shear viscosity of the blends was indicative of their unique packing and coating structure, whereas their high-shear rheology was represented by a common mixing rule, i.e., a viscosity-averaging. Transmission and scanning electron and atomic force microscopes were used to probe the state of pigment / latex dispersions, coating surfaces, freeze fractured coating cross-sections, and coating surface topography. These microscopic studies complemented the above observations. In addition, the ratio, R, of CPVC/(Pigment Packing Volume) has been proposed as a measure of the binder efficiency for a given pigment or pigment mixtures or as a measure of binder-pigment interactions. Also, a mathematical model has been proposed to estimate the packing volumes of clay and ground calcium carbonate pigments with their respective particle size distributions. As well known in the particle packing, the narrower the particle size distributions, the lower the packing volumes and the greater the coating porosity, regardless of particle shapes.

• Elastomers and Composites
• /
• 제45권4호
• /
• pp.256-262
• /
• 2010

[ $80\;^{\circ}C$ ] 346 bar 상태의 초임계 이산화탄소 내에서 methyl acrylate, ethyl acrylate, butyl acrylate와 glycidyl methacrylate을 중합하였다. 초임계 이산화탄소 분산매에서의 중합을 위하여 aminopropyltriethoxysilane을 사용하여 glycidyl methacrylate를 monoglycidyl ether terminated PDMS에 결합시킨 glycidyl methacrylate linked poly(dimethylsiloxane)(GMS-PDMS)를 계면활성제로 사용하였다. $CO_2$에서 합성된 Poly(alkyl acrylate)의 수율은 acrylate 단량체의 알킬기가 커질수록 낮아졌다. Poly(glycidyl methacrylate)와 poly(methyl acrylate)는 구형으로 만들어진 반면, poly(ethyl acrylate)와 poly(butyl acrylate)는 점성의 액상으로 합성되었다. Poly(glycidyl methacrylate) 입자의 수평균직경은 2.45 ${\mu}m$이며 입자 직경의 분포는 매우 좁았다. poly(methyl acrylate)의 수평균직경은 0.52 ${\mu}m$이며 입자크기는 bimodal로 분포되었다. 초임계 이산화탄소에서 중합된 poly(glycidyl methacrylate)와 poly(alkyl acrylate)들의 유리전이온도는 통상의 방법으로 중합된 poly(glycidyl methacrylate)와 poly(alkyl acrylate)의 유리전이온도보다 4~9 K 높게 측정되었다.

• 대한화장품학회지
• /
• 제38권1호
• /
• pp.15-31
• /
• 2012

이전 연구에서 저자들은 여뀌 추출물의 항산화, 항노화, 항균 활성 및 여뀌 추출물을 함유한 크림의 보습 효과에 대한 결과를 보고한 바 있다. 본 연구에서는 여뀌 추출물과 그 주요 성분인 isoquercitrin의 사람 적혈구와 HaCaT 세포에서의 세포 보호 효과를 측정하였다. 여뀌 추출물의 피부 전달시스템으로 에토좀 및 탄성 리포좀을 제조하여 입자크기, 포집효율, 안정성 및 피부 흡수 증진 능력을 평가하였다. 적혈구 광용혈에서 여뀌 추출물과 isoquercitrin은 $5{\mu}g/mL$의 농도에서 ${\alpha}$-토코페롤보다도 큰 세포보호효과를 나타내었다. 여뀌 추출물은 HaCaT 세포에 대해 $50{\mu}g/mL$의 농도에서 독성을 나타내지 않았다, UVB $400mJ/cm^2$를 HaCaT cell에 조사하였을 때, 여뀌 추출물은 농도 의존적($12.5{\sim}50{\mu}g/mL$)으로 자외선으로부터 세포를 보호하였고, $25{\mu}g/mL$의 농도에서 양성 대조군(세포 생존율, 36 %)에 비하여 큰세포보호 활성(생존율, 90 %)을 나타내었다. 0.04 % 여뀌 추출물을 담지한 에토좀의 입자 크기는 173.0 nm, 포집효율은55.58 %이였다. 에토좀 제조 후 일주일동안 안정한 단분산 형태를 나타내었다. 피부 투과 실험 결과 에토좀은 일반 리포좀이나 에탄올 용액에서보다도 더 큰 피부 투과능을 보여주었다. 0.1 % 여뀌 추출물을 담지한 탄성 리포좀의 최적의 제형은 인지질 대 계면활성제($Tego^{(R)}$care 450)의 비율이 95 : 5으로 확인되었다. 0.1 % 여뀌 추출물 함유한 최적의 탄성 리포좀의 입자크기는 176.5 nm, 가변형성은 16.4, 포집효율은 68.8 %이었다. 여뀌 추출물을 담지한 탄성 리포좀은 계면활성제가 포함되지 않은 제형보다 더 큰 피부 투과능을 나타내었다.