• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.4
• /
• pp.298-310
• /
• 2007

This study compared the correlation between the accumulated copper content in earthworms and the copper concentration rate of soil measured using several methods to extract heavy metals from soil. For the experiment, a microcosm soil test was carried out using copper contaminated soil from the vicinity of copper-roofed buildings and earthworms (Eisenia fetida). Soils from the study area were used to produce 6 treatments; control, 1C (contamination level with the lowest treated copper concentration rate), 2C, 4C, 8C, and 16C (contamination level with the highest treated copper concentration rate). Microcosm soil test using the 6 treatments proved that as the copper content in soil and the experiment time increased, the growth rate of and the accumulated copper concentration rate in earthworms increased as well. The degree of the increase corresponded to the order of the treated copper concentration levels in microcosm soils. Standard method of the ministry of environment and EPA method 3051 were used to obtain the copper concentration in soil and the total copper content in soil, respectively. The correlation coefficient (r) of 0.9875~0.9993 between the copper content extracted by the standard method and the total copper content shows high positive correlation. The correlation coefficient of the copper content in soil extracted by the standard method and the accumulated copper content in earthworms, and the correlation coefficient of the total copper content in soil and the accumulated copper content in earthworms were ranged from 0.9193 to 0.9728 and from 0.9282 to 0.9844, respectively, showing highly significant positive correlation. Due to the high correlation between the copper concentration in soil and the accumulated copper content in earthworms, it is concluded that earthworms are suitable to be used as biological indicator species or for bio-monitoring against copper contamination of soil.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.681-692
• /
• 2013

We aimed to evaluate the effectiveness of the Giggenbach bottle method and develop the related pretreatment and analytical methods using artificial fumarolic gases. The artificial fumarolic gases were generated by mixing $CO_2$, CO, $H_2S$, $SO_2$, $H_2$, and $CH_4$ gas streams with a $N_2$ stream sparged through an acidic medium containing HCl and HF, with their compositions varied by adjusting the gas flow rates. The resultant fumarolic gases were collected into an evacuated bottle partially filled with a NaOH absorption solution. While non-condensible gases such as CO, $H_2S$, and $CH_4$ accumulated in the headspace of the bottle, acidic components including $CO_2$, $SO_2$, HCl, and HF that were dissolved into the alkaline solution. Like other acidic components, $H_2S$ also dissolved into the solution, but it reacted with dissolved $Cd^{2+}$ to precipitate as CdS when $Cd(CH_3COO)_2$ was added. The non-condensible gases were analyzed on a gas chromatography. Then, CdS precipitates were separated from the alkaline solution by filtration, and they were pretreated with $H_2O_2$ to oxidize CdS-bound sulfide into sulfate. In addition, a portion of the solution was also pretreated with $H_2O_2$ to oxidize sulfite to sulfate. Following the pretreatment, the resultant samples were analyzed for $SO_4^{2-}$, $Cl^-$ and $F^-$ on an ion chromatography. In the meanwhile, dissolved $CO_2$ was analyzed on a total organic carbon-inorganic carbon analyzer without such pretreatment. According to our experimental results, the measured concentrations of the fumarolic gases were shown to be proportional to the gas flow rates, indicating that the Giggenbach bottle method is adequate for monitoring volcanic gas. The pretreatment and analytical methods employed in this study may also enhance the accuracy and reproducibility of the Giggenbach bottle method.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.333-339
• /
• 2017

This research was aimed to establish rapid analysis technique for the determination of nitrate ($NO_3{^-}$) concentration in the leaves of paprika, which has key role for the stable vegetative and reproductive growth. Leaf petiole and blade sap of two paprika cultivars ('Raon red' and 'Raon yellow') were used for the determination of $NO_3{^-}$ concentration, separately using rapid detection kit (RQ-flex) and spectroscopy quantification methods. In addition, two paprika cultivars namely, 'Nicole' and 'TP2001' were used to determine the status of $NO_3{^-}$ concentration in leaf of each fruiting group. $NO_3{^-}$ concentration in leaf blade sap and the content in leaf showed significant correlation ($R^2=0.8628$), analysed by RQ-flex and spectroscopy methods, respectively. Furthermore, leaf petiole sap and the content in leaf also showed significant correlation ($R^2=0.6734$) but the relationship was poor compared to leaf blade sap and the leaf content. $NO_3{^-}$ concentration in petiole sap decreased in all the cultivars from early to late fruiting group. The higher concentration in the lower leaves and the continuous decrease towards the upper leaves in the both years were found through the analysis of $NO_3{^-}$ concentration in different leaf position. In addition, daily short-term fluctuation of $NO_3{^-}$ in petiole sap could be rapidly monitored. These results showed that long-term or short-term monitoring by test strip-based rapid analysis technique might be useful tool for the diagnosis of nutritional status for the stable of nutritional management in paprika.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.5
• /
• pp.19-32
• /
• 2007

In Korea, there have been various methods of estimating groundwater recharge which generally can be subdivided into three types: baseflow separation method by means of groundwater recession curve, water budget analysis based on lumped conceptual model in watershed, and water table fluctuation method (WTF) by using the data from groundwater monitoring wells. However, groundwater recharge rate shows the spatial-temporal variability due to climatic condition, land use and hydrogeological heterogeneity, so these methods have various limits to deal with these characteristics. To overcome these limitations, we present a new method of estimating recharge based on water balance components from the SWAT-MODFLOW which is an integrated surface-ground water model. Groundwater levels in the interest area close to the stream have dynamics similar to stream flow, whereas levels further upslope respond to precipitation with a delay. As these behaviours are related to the physical process of recharge, it is needed to account for the time delay in aquifer recharge once the water exits the soil profile to represent these features. In SWAT, a single linear reservoir storage module with an exponential decay weighting function is used to compute the recharge from soil to aquifer on a given day. However, this module has some limitations expressing recharge variation when the delay time is too long and transient recharge trend does not match to the groundwater table time series, the multi-reservoir storage routing module which represents more realistic time delay through vadose zone is newly suggested in this study. In this module, the parameter related to the delay time should be optimized by checking the correlation between simulated recharge and observed groundwater levels. The final step of this procedure is to compare simulated groundwater table with observed one as well as to compare simulated watershed runoff with observed one. This method is applied to Mihocheon watershed in Korea for the purpose of testing the procedure of proper estimation of spatio-temporal groundwater recharge distribution. As the newly suggested method of estimating recharge has the advantages of effectiveness of watershed model as well as the accuracy of WTF method, the estimated daily recharge rate would be an advanced quantity reflecting the heterogeneity of hydrogeology, climatic condition, land use as well as physical behaviour of water in soil layers and aquifers.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.44-63
• /
• 2000

Situated close to Heathrow Airport, and adjacent to the M4 and M25 Motorways, the site at Axis Park is considered a prime location for business in the UK. In consequnce two of the UK's major property development companies, MEPC and Redrew Homes sought the expertise of Intergeo to remediate the contaminated former industrial site prior to its development. Industrial use of the twenty-six hectare site, started in 1936, when Hawker Aircraft commence aircraft manufacture. In 1963 the Firestone Tyre and Rubber Company purchased part of the site. Ford commenced vehicle production at the site in the mid-1970's and production was continued by Iveco Ford from 1986 to the plant's decommissioning in 1997. Geologically the site is underlain by sand and gravel, deposited in prehistory by the River Thames, with London Clay at around 6m depth. The level of groundwater fluctuates seasonally at around 2.5m depth, moving slowly southwest towards local streams and watercourses. A phased investigation of the site was undertaken, which culminated in the extensive site investigation undertaken by Intergeo in 1998. In total 50 boreholes, 90 probeholes and 60 trial pits were used to investigate the site and around 4000 solid and 1300 liquid samples were tested in the laboratory for chemical substances. The investigations identified total petroleum hydrocarbons in the soil up to 25, 000mg/kg. Diesel oil, with some lubricating oil were the main components. Volatile organic compounds were identified in the groundwater in excess of 10mg/l. Specific substances included trichloromethane, trichloromethane and tetrachloroethene. Both the oil and volatile compounds were widely spread across the site, The specific substances identified could be traced back to industrial processes used at one or other dates in the sites history Slightly elevated levels of toxic metals and polycyclic aromatic hydrocarbons were also identified locally. Prior to remediation of the site and throughout its progress, extensive liaison with the regulatory authorities and the client's professional representatives was required. In addition to meetings, numerous technical documents detailing methods and health and safety issues were required in order to comply with UK environmental and safety legislation. After initially considering a range of options to undertake remediation, the following three main techniques were selected: ex-situ bioremediation of hydrocarbon contaminated soils, skimming of free floating hydrocarbon product from the water surface at wells and excavations and air stripping of volatile organic compounds from groundwater recovered from wells. The achievements were as follows: 1) 350, 000m3 of soil was excavated and 112, 000m3 of sand and gravel was processed to remove gravel and cobble sized particles; 2) 53, 000m3 of hydrocarbon contaminated soil was bioremediated in windrows ; 3) 7000m3 of groundwater was processed by skimming to remove free floating Product; 4) 196, 000m3 of groundwater was Processed by air stripping to remove volatile organic compounds. Only 1000m3 of soil left the site for disposal in licensed waste facilities Given the costs of disposal in the UK, the selected methods represented a considerable cost saving to the Clients. All other soil was engineered back into the ground to a precise geotechnical specification. The following objective levels were achieved across the site 1) By a Risk Based Corrective Action (RBCA) methodology it was demonstrated that soil with less that 1000mg/kg total petroleum hydrocarbons did not pose a hazard to health or water resources and therefore, could remain insitu; 2) Soils destined for the residential areas of the site were remediated to 250mg/kg total petroleum hydrocarbons; in the industrial areas 500mg/kg was proven acceptable. 3) Hydrocarbons in groundwater were remediated to below the Dutch Intervegtion Level of 0.6mg/1; 4) Volatile organic compounds/BTEX group substances were reduced to below the Dutch Intervention Levels; 5) Polycyclic aromatic hydrocarbons and metals were below Inter-departmental Committee for the Redevelopment of Contaminated Land guideline levels for intended enduse. In order to verify the qualify of the work 1500 chemical test results were submitted for the purpose of validation. Quality assurance checks were undertaken by independent consultants and at an independent laboratory selected by Intergeo. Long term monitoring of water quality was undertaken for a period of one year after remediation work had been completed. Both the regulatory authorities and Clients representatives endorsed the quality of remediation now completed at the site. Subsequent to completion of the remediation work Redrew Homes constructed a prestige housing development. The properties at "Belvedere Place" retailed at premium prices. On the MEPC site the Post Office, amongst others, has located a major sorting office for the London area. Exceptionally high standards of remediation, control and documentation were a requirement for the work undertaken here.aken here.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.377-391
• /
• 2018

In order to efficiently monitor red tide over a wide range, the need for red tide detection using remote sensing is increasing. However, the previous studies focus on the development of red tide detection algorithm for ocean colour sensor. In this study, we propose the use of multi-sensor to improve the inaccuracy for red tide detection and remote sensing data in coastal areas with high turbidity, which are pointed out as limitations of satellite-based red tide monitoring. The study area were selected based on the red tide information provided by National Institute of Fisheries Science, and spatial fusion and spectral-based fusion were attempted using GOCI image as ocean colour sensor and Landsat OLI image as terrestrial sensor. Through spatial fusion of the two images, both the red tide of the coastal area and the outer sea areas, where the quality of Landsat OLI image was low, which were impossible to observe in GOCI images, showed improved detection results. As a result of spectral-based fusion performed by feature-level and rawdata-level, there was no significant difference in red tide distribution patterns derived from the two methods. However, in the feature-level method, the red tide area tends to overestimated as spatial resolution of the image low. As a result of pixel segmentation by linear spectral unmixing method, the difference in the red tide area was found to increase as the number of pixels with low red tide ratio increased. For rawdata-level, Gram-Schmidt sharpening method estimated a somewhat larger area than PC spectral sharpening method, but no significant difference was observed. In this study, it is shown that coastal red tide with high turbidity as well as outer sea areas can be detected through spatial fusion of ocean colour and terrestrial sensor. Also, by presenting various spectral-based fusion methods, more accurate red tide area estimation method is suggested. It is expected that this result will provide more precise detection of red tide around the Korean peninsula and accurate red tide area information needed to determine countermeasure to effectively control red tide.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.477-487
• /
• 2019

Objectives: Firefighters are known to be exposed to a variety of toxic substances, but little information is available on the exposure profile of firefighting activities. The aims of this study were to conduct exposure monitoring of toxic chemicals at fire scenes, to compare the concentrations of respective chemicals among firefighting tasks, and to assess the main factors influencing the concentrations of chemicals. Methods: Researchers performed sampling at firefighting scenes during four weeks in 2013. At the scene, we collected samples based on firefighters' own activities and examined the situation and scale of the accident. Collected samples were classified into three categories, including fire extinguishing and overhaul, and were analyzed in the laboratory according to respective analysis methods. Results: A total of fourteen fire activity events were surveyed: five fire extinguishing, six overhaul, and three fire investigations. Although no substance exceeded the ACGIH TLV, PAHs were detected in every sample. Naphthalene ranged from 0.24 to 279.13 mg/㎥ (median 49.6 mg/㎥) and benzo(a)pyrene was detected in one overhaul case at 10.85 ㎍/㎥. Benzene (0.01-12.2 ppm) was detected in every task and exceeded the ACGIH TLV. No significant difference in concentrations between tasks was shown. Conclusions: These results indicate that all firefighting tasks generated various hazardous combustion products, including possible carcinogens.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.4 no.1
• /
• pp.77-82
• /
• 2001

Purpose: The fecal acid steatocrit is an improved steatocrit method for the evaluation of fecal fat. The present study was set up in order to define the normal range of acid steatocrit values during the first 3 months of life. Methods: Fecal acid steatocrit values were determined in 78 healthy full term and in 21 healthy prematurely born infants between May 1998 and April 2000. The acid steatocrit method was performed in these babies during the first 3 months of life. Results: Steatorrhea occurs during the first month and then decreases, as shown by the fall in the acid steatocrit curve from 1st to 3rd month in our subject. Very high acid steatocrit results (above 90%) were found in all full term and premature infants during the first month of age. Acid steatocrit results of human milk-fed infants were significantly lower than those of formula-fed infants (p=0.0018). Conclusion: We conclude that high acid steatocrit results during the first 1 month of age can be due to physiologic steatorrhea. The acid steatocrit micromethod can be used for the evaluation of milk fat absorption in infants and monitoring steatorrhea instead of other more cumbersome methods.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.77-81
• /
• 1998

By standardized method, Bacillus subtilis BGA, Bacillus cereus var. mycoides ATCC 11778, and Micrococcus luteus ATCC 9341 were seeded on the muller hinton agar (Difco) plate, and pH was adjusted to 6.0, 7.2, and 8.0. Five agar plates, B. subtilis (pH 6.0), B. cereus (pH 6.0), B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0), were employed as test plates of modified EEC 4-plate method. Oxytetracycline (OTC) with a diet was orally administered to flounder, Paralichthys olivaceus, at 100 mg/kg once a day. After oral administration, modified EEC 4-plate method by the three screening test using muscle-direct, extraction-disk and direct-disk methods was conducted for 3 fish at 1, 3, 5, 10, 15, 20, 25 and 30 days. Muscle-direct treatment of B. subtilis (pH 6.0) was found to be dubious positive (${\pm}$) at the 1st day after the administration; thereafter, it was found to be negative to the last day of the experiment. Extraction-disk and direct-disk treatment of B. subtilis (pH 6.0) were found to be negative from the 1st day to the last day after the administration. B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0) by the three screening tests, were found to be negative all the way after the administration. On the other hand, B. cereus (pH 6.0) by the three screening tests was clearly found to be positive for the first 15 days after the administration, and then muscle-direct and direct-disk treatment of B. cereus (pH 6.0) were found to be dubious positive at 20th days after the administration. However extraction-disk treatment of B. cereus (pH 6.0) was clearly found to be negative at the same stage; thereafter, the three screening tests of B. cereus (pH 6.0) were found negative to the last of the experiment. These findings showed that to have equal sensitivity to those determination for the residual detection of OTC, and also confirmed that B. cereus was effective test organism for the monitoring of OTC.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.2
• /
• pp.112-129
• /
• 2012

The aim of this study was to provide basic data in managing the project that was carried out on Bulgwangcheon in a nature-friendly way to improve the conditions around the areas, which was brought to completion in 2002, based on changes in ecological characteristics. For this propose, this study examined documents related to the project, compared physical and enviromnental changes before and after the project was conducted and analyzed changes in the stream ecosystem. The result showed that in areas that effluent water was often observed, especially when it rained, the river wall was washed away and vegetation was found damaged. As for actual vegetation, this study compared planting coverage of each section of the research area and actual vegetation charts. The results indicated that Lespedeza spp., Aster koraiensis among mixed seeds that were planted in the reservoir path were almost swept away while Festuca arundinacea dominated the areas. Phragmites communis, Miscanthus sacchariflorns and Salix gracilistyla which had been planted in a small number were also almost washed out though a small number of them were left to form a colony. After examining the topography and structure of the plant community, this study found that areas where mixed seed were planted had changed into two types of vegetation: First type of area is dominated by P and R which are usually raised in apron with abundant floating particles. The second type of area is dominated by dry gramineous plant such as F and A. Areas around low flow channel where Phragmites communis, Miscanthus sacchariflorus and Salix gracilistyla planting construction method is applied was washed away with the width of low flow channel reduced. Though P, M and S formed a small community in some areas around the low flow area, they were in small number and in composition of simple plant species. Two ways were suggested in this study to manage the stream in an ecological way. First, adequate revetment construction methods should be applied by monitoring the flow of the stream as well as considering the flood control of urban streams. Second, target vegetation communities that are suitable for the environment of the stream should be chosen and be plantedconstantly with high density. At the same time, ornamental native plants shouldn't be planted as they have been and disturbing vegetation should be removed.