• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.3
• /
• pp.322-335
• /
• 2019

Objectives: The goal of this study is to standardize industry, process, and job within work environment measurement information. Methods: We selected 180 work environment measurement reports on 30 industries from a database monitored from 2014 to 2016 by the Korea Industrial Health Association. Ten industrial hygienists, each with over five years of experience in measurement, conducted a primary standardization of 180 reports. Two professional industrial hygienists with more than 20 years of experience each reviewed and revised the results of the primary standardization. We also examined the validity on the usefulness of the standardized database by the two industrial hygienists. Results: The final standardization results were classified into eight major categories, 23 sub-major categories, 39 minor categories, 53 unit categories and 70 sub-unit categories in the Korean Standard Industrial Classification (KSIC) 10th revision. A total of 161 processes were standardized, and there were 148 processes with K2B codes. Standard job was coded into 13 job groups including operator, automobile maintenance, nurse, maintenance, manager, excavating machine operator, forklift driver, radiologist, clinical pathologist, signer, researcher, kitchen assistant, and concrete reinforcement ironworker. Conclusions: Although the standardized information in this study may be only a part of the total information, it can be useful for improvement of the K2B system. Additional research is needed for an ongoing clean-up of data in the K2B and re-calibration and reclassification of standard processes until the future national exposure monitoring system is fully established.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.637-647
• /
• 2019

The detection of crop stress is an important issue for the accurate assessment of yield decline. The photochemical reflectance index (PRI) was developed as a remotely sensed indicator of light use efficiency (LUE). The PRI has been tested in crop stress detection and a number of studies demonstrated the feasibility of using it. However, only few studies have focused on the use of PRI from remote sensing imagery. The monitoring of PRI using drone and satellite is made difficult by the low spectral resolution image captures. In order to estimate PRI from multispectral sensor, we propose a band fusion method using adjacent bands. The method is applied to the drone-based hyperspectral and multispectral imagery and estimated PRI explain 79% of the original PRI. And time series analyses showed that two PRI data (drone-based and SRS sensor) had very similar temporal variations. From these results, PRI from multispectral imagery using band fusion can be used as a new method for evaluation of crop stress.

• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.457-470
• /
• 2019

This study aims to present the characteristics of marine physics, water quality, and sediment quality around offshore wind farm near the Gochang and Buan sea areas through the analysis of monitoring data. The relationships between suspended solid and wave height as well as suspended solid and flow velocity were analyzed. We found that Correlation Coefficient values of 0.61~0.69 between wave height and suspended solid, and suspended solid concentration reaches 75 mg/L or higher when wave height of more than 1m occurred in the spring (1 month). The water quality index (WQI) was used to identify the status of the water quality in the study area. Most of the measured points were rated first grade (very good). The variation of chlorophyll-a was relatively hight compared to the other criteria, indicating that it is a major factor affecting the quality index. In the sediment column, all heavy metals were detected below the Threshold Effects Level(TEL), and ignition loss and grain size show a positive correlation.

• Korean Journal of Food Science and Technology
• /
• v.51 no.5
• /
• pp.425-431
• /
• 2019

Selected leafy vegetables, widely used for Korean Namul dishes, were heat-treated in different ways and their folate retention was investigated. The Lactobacillus casei method was applied for folate estimation and validated to ensure reliability of analytical data. The folate content in Namul highly varied, from 29.7 to $293.4{\mu}g/100g$, depending on the heating methods and the types of vegetables. Most of the Namul variants showed increased folate content on heat treatment. Frying yielded higher folate retention than the other cooking methods (blanching, steaming, baking, and panfrying), and pig weed showed the highest folate retention (3.3 times, $293.4{\mu}g/100g$). L. casei assay for folate estimation showed 95.7% recovery and relative standard deviations less than 2% for both reproducibility and repeatability, indicating good accuracy and precision. Quality of the folate assay was assured by monitoring a quality control chart and a proficiency test (z-score= -0.1) during the entire of study.

• Journal of Life Science
• /
• v.29 no.11
• /
• pp.1267-1272
• /
• 2019

The main cause of cervical cancer is the human papillomavirus (HPV), and HPV DNA has been reported in 99.7% of patients with cervical cancer. The worldwide prevalence is highest for the HPV 16 and 18 genotypes, but HPV 52 and 58 have the highest prevalence in Asian countries, including Korea. The purpose of this study was to obtain basic data for the prevention of cervical cancer by analyzing the prevalence of HPV and the genotypes of high risk-human papillomavirus (HR-HPV) infection in women in Busan, Korea. We analyzed 1,995 cases of HPV in women who visited a Busan obstetrics and gynecology hospital from January 2016 to December 2017. The prevalence of HPV among these women was 28.3% (565/1995), and the HR-HPV infection rate was 75.4% (426/565). The HR-HPV genotype with the highest prevalence was HPV-52 (63/565, 11.2%), followed by HPV-58 (56/565, 9.9%), HPV-53 (55/565, 9.7%), and HPV-16 (53/565, 9.4%). The HR-HPV infection rate of young women 18-39 years old was 60.3% (257/426), so this age group should undergo continuous monitoring. The cytological results revealed a high infection rate for HPV-16 in high grade squamous intraepithelial lesions (HSIL) and squamous cell carcinoma (SCC). However, further evaluation of more samples is needed to confirm the HR-HPV genotypes related to the development of cervical epithelial neoplasias.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.4
• /
• pp.87-97
• /
• 2000

A steady state performance simulation and diagnostics program for the turboprop engine (PT6A-62), which is the power plant of the first developed military basic trainer KT-1 in Republic of Korea, was developed. The developed steady state performance analysis program was evaluated with the performance data provided by the engine manufacturer and with analysis results of GASTURB program, which is well known for the performance simulation of gas turbines. Performance parameters were discussed to evaluate validity of the developed program at various cases such as altitude, flight velocity and part load variation. GPA(Gas Pass Analysis) allows engine performance deterioration to be identified at the module level in terms of reduction in component efficiencies and changes in mass flow. In order to find optimal instrument set to detect the physical faults such as fouling, erosion and corrosion, a gas path analysis approach is utilized. This study was performed in two cases for selection of optimal measurement parameters. One case was considered with the effect of instrument number by changing independent parameter number. The other case was performed with selection of independent parameter set. According to the analysis results, the optimal measurement parameters selected were eight dependent variables such as shaft horsepower, fuel flow rate, compressor exit pressure and temperature, compressor turbine inlet pressure and temperature and power turbine inlet pressure and temperature.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.12
• /
• pp.103-111
• /
• 2013

At present, a variety of Korean news stories have been about important online content and its importance in the press is becoming higher. Diverse news from businesses are provided to the public as press releases through newspapers or broadcasting media. For such news to become information for a press release, enterprises visit reporters, use e-mails, faxes, or couriers to deliver the information. However, such methods have problems with time, human resources, expenses, and file damage. Also, with these methods it is bothersome for enterprises to check what has been released and for the press to make frequent contact with enterprises for interviews and for content to be released. Therefore, this study aimed to realize a distribution system which enterprises can use to distribute data to be released to the press and to easily check what is to be released while the press can ask for interview requests in a simple way, as well as a news gathering robot that can collects news on the enterprises involved from articles online or in portal sites.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.991-997
• /
• 2011

Soil erosion and sediment has been known as one of pollutants causing water quality degradation in water bodies. With global warming issues worldwide, various soil erosion studies have been performed. Although on-site monitoring of sediment loss would be an ideal method to evaluate soil erosion condition, modeling approaches have been utilized to estimate soil erosion and to evaluate various best management practices on soil erosion reduction. Although the USLE has been used in soil erosion estimation for the last 40 years, the USLE model has limitations in estimating event-based soil erosion reflecting rainfall intensity and rainfall duration for long-term period. Thus, the calibrated model, capable of simulating soil erosion using hourly rainfall data, was utilized in this study to evaluate the effects of rainfall amount and rainfall intensity on soil erosion. It was found that USLE soil erosion value is $3.06ton\;ha^{-1}\;yr^{-1}$, while soil erosion values from 2006~2010 were $2.469ton\;ha^{-1}\;yr^{-1}$, $0.882ton\;ha^{-1}\;yr^{-1}$, $1.489ton\;ha^{-1}\;yr^{-1}$, $2.158ton\;ha^{-1}\;yr^{-1}$, $1.602ton\;ha^{-1}\;yr^{-1}$, respectively. Especially, soil erosion from single storm event for 2008-2010 would be responsible for 30% or more of annual soil loss. As shown in this study, hourly soil erosion estimation system would provide more detailed output from the study area. In addition, the effects of rainfall intensity on soil erosion could be evaluated with this system.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.11
• /
• pp.457-464
• /
• 2019

The weight of pig is one of the main factors in determining the health and growth state of pigs, their shipment, the breeding environment, and the ration of feed, and thus measuring the pig's weight is an important issue in productivity perspective. In order to estimate the pig's weight by using the number of pig's pixels from images, acquired from a Top-view camera, the posture determining and the head removal from images are necessary to measure the accurate number of pixels. In this research, we propose the fast and accurate method to determine the pig's posture by using a fast image processing technique, find the head location by using a fast deep learning technique, and remove pig's head by using light weighted image processing technique. First, we determine the pig's posture by comparing the length from the center of the pig's body to the outline of the pig in the binary image. Then, we train the location of pig's head, body, and hip in images using YOLO(one of the fast deep learning based object detector), and then we obtain the location of pig's head and remove an outside area of head by using head location. Finally, we find the boundary of head and body by using Convex-hull, and we remove pig's head. In the Experiment result, we confirmed that the pig's posture was determined with an accuracy of 0.98 and a processing speed of 250.00fps, and the pig's head was removed with an accuracy of 0.96 and a processing speed of 48.97fps.

• Journal of Environmental Health Sciences
• /
• v.47 no.5
• /
• pp.472-478
• /
• 2021

Background: The Legionella case detection and notification rate have increased in public artificial water environments where people visit, including large buildings, public baths, and hospitals. Objectives: In this study, the distribution of Legionella and its epidemiologic characteristics were analyzed in the water systems of public facilities in Chungcheongnam-do Province in South Korea. Methods: Culture and PCR analysis were performed on 2,991 environmental water system samples collected from 2017 to 2019, and associations with year, facilities, seasons, and temperature of water system were statistically analyzed by using R-Studio for Windows. Descriptive data was compared using chi-square tests and independent t-tests. Results: The detection rate of Legionella increased from 3.1% in 2017 to 10.3% in 2019, appearing most frequently in the order of public baths, large-scale buildings, hospitals, and apartments. It was detected mainly in summer from June to August, over 1.0×10³ CFU/L on average in 133 cases (66.5%). Lots of germs were detected in bathtub water, cooling tower water, and warm water (p<0.001), and it was detected at higher rates in the cities where multipurpose facilities were concentrated than in rural areas (p=0.018). Conclusions: This study suggests that continuous monitoring and control are required for Legionella in the water system environment of high risk facilities. Moreover, these results will be helpful to prepare efficient management plans to prevent the Legionellosis that occurs in Chungcheongnam-do Province.