• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.37-46
• /
• 2012

This study was conducted to identify groundwater recharge and discharge amounts of a representative urban-rural composite area located in Yongin city, Kyounggi-do, Korea. Groundwater recharge would be affected by mainly two processes in the study area: rainfall and leakage from public water pipelines including water-supply and sewage system. Groundwater recharge rate was estimated to be 13.5% by applying annual groundwater level data from two National Groundwater Monitoring Stations to the master regression curve method. Subsequently, the recharge amounts were determined to be $13,253{\times}10^3m^3/yr$. Leakage amounts from water-supply and sewage system were estimated to be $3,218{\times}10^3$ and $5,696{\times}10^3m^3/yr$, respectively. On the whole, a total of the recharge amounts was $22,167{\times}10^3m^3/yr$, of which 60% covers rainfall recharge and 40% pipeline leakage. Groundwater discharge occurred through three processes in the composite area: baseflow, well pumping, and discharge from urban infrastructure including groundwater infiltration into sewage pipeline and artificial extraction of groundwater to protect underground facilities from submergence. Discharge amounts by baseflow flowing to the Kiheung agricultural reservoir and well pumping were estimated to be $382{\times}10^3$ and $1,323{\times}10^3m^3/yr$, respectively. Occurrence of groundwater infiltration into sewage pipeline was rarely identified. Groundwater extraction amounts from the Bundang subway line as an underground facility were identified as $714{\times}10^3m^3/yr$. Overall, a total of the discharge amounts was determined to be $2,419{\times}10^3m^3/yr$, which was contributed by 29% of artificial discharge. Even though groundwater budget of the composite area was identified to be a surplus, it should be managed for a sound groundwater environment by changing deteriorated pipelines and controlling artificial discharge amounts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1154-1163
• /
• 2008

DAS and SCADA system are main systems, which operate and manage the power system by using computer and communication technology. But DAS and SCADA have been operated independently in Korea, so there was some time delay in the fault handling and live-line work. To improve that problems, studies on the interface between DAS and SCADA have been needed. From November 2005 to December 2007, the pilot project has been performed in KEPCO's branch offices, as a result, direct method will be applied widely all over the country until 2010 because the operation information of substation users want can be transmitted fast and it is possible to control 43RC directly although the expense for direct method is about 1.3 times larger than that for web method. To improve problems revealed during the pilot project, substation object to object communication method is proposed and interface database automatic generation and interface system diagnosis and logging functions are developed. Interface data point and communication data type are defined, substation single line diagram automatic generation or manual editing function, SCADA monitoring and controlling function, log data managing function are developed in SCADA HMI program. It is expecting to reduce the average time for each outage about 33% and to improve the reliability, efficiency of operation, execution of DAS from automatic load transfer under a fault, and to contribute to export project.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.18 no.2
• /
• pp.143-154
• /
• 2016

This study investigated the occurrences, causes, and mitigation of the recent ground subsidence and underground cavity generation events in Korea. Two main causes of ground subsidence are (1) the soil erosion by seepage during tunneling and earth excavation and (2) the damage of underground pipes. The main cause of the soil erosion during tunneling was the uncontrolled groundwater flow. Especially, when excavating soft grounds using a tunnel boring machine (TBM), the ground near TBM operation halt points were found to be the most vulnerable to failure. The damage of underground pipes was mainly caused by poor construction, material deterioration, and differential settlement in soft soils. The ground subsidence during tunneling and earth excavation can be managed by monitoring the outflow of groundwater and eroded soils in construction sites. It is expected that the ground subsidence by the underground pipe damage can be managed or mitigated by life cycle analysis and maintenance of the buried pipes, and by controlling the earth pressure distribution or increasing the bearing capacity at the upper ground of the buried pipes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.205-210
• /
• 2014

This is concerned with the technology to display the design on Porcelain and adjust malfunction for moving effect and light intensity by curator. More precisely, the technology makes it possible that the porcelain is connected to Light module which is the device for controlling light emission and rotating rolling plate, etc that are connected to LED light module, optical fiber and controller that is for scenario from the given storytelling. In addition, with a WiFi portable device (Smart-phone, other mobile device). equipped with a scenario programs, information for operation, failure and malfunction can be obtained and analyzed in real-time, and menu color and alarm is alerted when the displaying design is in abnormal status, which makes the early reactions to the status. Furthermore, the collected data can be sent through WiFi network to the device and PC managed by the curator specialized in managing the design on the Porcelain, thus the technology could help the curator who have less knowledge about moving pattern on the Porcelain. There is always a possibility of malfunction due to various condition that are caused by wring-harness when modules are wired-connected. In this research, in order to overcome this problem, we propose a system configuration that can do monitoring and diagnosis with a device for collecting data from LED control module, Light emission sensor and a personal WiFi device. Also, we performed connection between optical Fiber and LED and interlock for the system defined by the definition for information and storytelling scenario.

• Journal of Environmental Health Sciences
• /
• v.47 no.5
• /
• pp.432-445
• /
• 2021

Background: The European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA) tool has been recognized by EU REACH as a preferred approach for calculating worker health risks from chemicals. Objectives: The applicability of the ECETOC TRA to occupational exposure estimation from industrial uses of methanol was studied by inputting surveyed and varied parameters for TRA estimation as well as through comparison with measured data. Methods: Information on uses of methanol was collected from seven working environment monitoring reports along with the measured exposure data. Input parameters for TRA estimation such as operating conditions (OCs), risk management measures (RMMs) and process categories (PROCs) were surveyed. To compare with measured exposures, parameters from the surveyed conditions of ventilation but no use of respiratory protection were applied. Results: PROCs 4, 5, 8a, 10, and 15 were assigned to ten uses of methanol. The uses include as a solvent for manufacturing sun cream, surfactants, dyestuffs, films and adhesives. Methanol was also used as a component in a release agent, hardening media and mold wash for cast products as well as a component of hard-coating solution and a viscosity-controlling agent for manufacturing glass lenses. PROC 8a and PROC 10 of a cast product manufacturer without LEV (local exhaust ventilation) and general ventilation as well as no respiratory protection resulted in the highest exposure to methanol. Assuming the identical worst OCs and RMMs for all uses, exposures from PROC 5, 8a, and 10 were the same and the highest followed by PROC 4 and 15. The estimation resulted in higher exposures in nine uses except one use where measured exposure approximated exposures without RMMs. Conclusions: The role of ECETOC TRA as a conservative exposure assessment tool was confirmed by comparison with measured data. Moreover, it can guide which RMMs should be applied for the safe use of methanol.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.67-73
• /
• 2019

In this study, to optimize the production and utilization of biogas for organic waste resources, the precision monitoring of on-site facilities and the energy balance by facility were analyzed, and the solutions for field problems were investigated, and the design and operation guidelines for pretreatment facilities and generators were presented. Gas pre-treatment is required to solve frequent failures and efficiency degradation in operation of high quality refining facilities, and processing processes such as desulfurization, dehumidification, deoxidization, dust treatment, volatile organic compounds, etc. Since these processes are substances that are also eliminated from the high-quality process, quantitative guidelines are not presented in the gas pretreatment process, but are suggested to operate during the processing process as a qualitative guideline. In particular, dust, siloxane, and volatile organic compounds are the main cause of frequent failure of high-quality processes if they are not removed from the gas pretreatment process. Design of the biogas high-quality process. The operation guidelines provide quality standards [Methane content (including propane) of 95% or more] with 90% or more utilization of the total gas generation, two systems, and a margin of 10% or more. It also proposed installing gas equalization tank, installing thermal automatic control system for controlling equalization of auxiliary fuel, installing dehumidification device at the back of high quality for removing moisture generated in the process of gas compression, installing heat-resisting facilities to prevent freezing of facilities in winter and reducing efficiency, and installing membrane facilities in particular.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.4
• /
• pp.165-170
• /
• 2011

The ambient concentrations of nitrogen dioxide ($NO_2$) at 65 forest areas were measured every month using passive diffusive samplers from 2002 to 2009 and were compared to those at urban areas in order to investigate the characteristics of temporal and spatial distributions of $NO_2$ from the forest and urban areas. The annually averaged concentrations of $NO_2$ gradually decreased for both areas. The average concentration of $NO_2$ in the forest areas was 8.0 ppb, which was lower than that in the urban areas (i.e., 19.4 ppb) and the ecological standard level of the European Union (i.e., 14.6 ppb). The monthly average of $NO_2$ concentration depicted seasonal variations particularly in the urban areas, showing higher concentration in winter and lower concentration in summer. Strong locality of $NO_2$ concentration distribution illustrates that the locations near the metropolitan areas (e.g., Gyeonggi and Chungnam provinces) had the highest concentration during the measurement period. A significant positive correlation between $NO_x$ emissions and $NO_2$ concentration was observed, suggesting that the magnitude and proximity to sources of atmospheric nitrogen oxides would be important controlling factors.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.727-737
• /
• 1999

프로세스 중심 소프트웨어 개발 환경(PSEE : Process-centered Software Engineering Environment)은 소프트웨어 개발자를 위한 여러가지 정보의 제공과 타스크의 수행, 소프트웨어 개발 도구의 수행 및 제어, 필수적인 규칙이나 업무의 수행등과 같은 다양한 행위를 제공하는 프로세스 모형의 수행을 통하여 소프트웨어 개발 행위를 지원한다. SEED(Software Engineering Environment for Development)는 효율적인 소프트웨어 개발과 프로세스 모형의 수행을 제어하기 위해 ETRI에서 개발된 PSEE이다.본 논문에서는 SEED에서 프로세스 모형을 설계하기 위해 사용되는 SimFlex 프로세스 프로그래밍 언어와, 수행지원시스템인 SEED Engine의 구현에 대하여 기술한다. SimFlex는 간단한 언어 구조를 가진 프로세스 프로그래밍 언어이며, 적절한 적합화를 통하여 다른 PSEE에서 사용될 수 있다. SimFlex 컴파일러는 SimFlex에 의해 기술된 프로세스 모형을 분석하고, 모형의 오류를 검사하며, SEED Engine에 의해 참조되는 중간 프로세스 모형을 생성한다. 중간 프로세스 모형을 사용하여 SEED Engine은 외부 모니터링 도구와 연관하여 사용자를 위한 유용한 정보뿐만 아니라 SimFlex에 의해 기술된 프로세스 모형의 자동적인 수행을 제공한다. SimFlex 언어와 수행지원 시스템의 지원을 통하여 소프트웨어 프로세스를 모형화하는데 드는 비용과 시간을 줄일 수 있으며, 편리하게 프로젝트를 관리하여 양질의 소프트웨어 생산물을 도출할 수 있다. Abstract Process-centered Software Engineering Environments(PSEEs) support software development activities through the enaction of process models, providing a variety of activities such as supply of various information for software developers, automation of routine tasks, invocation and control of software development tools, and enforcement of mandatory rules and practices. The SEED(Software Engineering Environment for Development) system is a PSEE which was developed for effective software process development and controlling the enactment of process models by ETRI.In this paper, we describe the implementation of the SimFlex process programming language used to design process models in SEED, and its runtime support system called by SEED Engine. SimFlex is a software process programming language to describe process models with simple language constructs, and it could be embedded into other PSEEs through appropriate customization. The SimFlex compiler analyzes process models described by SimFlex, check errors in the models, and produce intermediate process models referenced by the SEED Engine. Using the intermediate process models, the SEED Engine provides automatic enactment of the process models described by SimFlex as well as useful information for agents linked to the external monitoring tool. With the help of the SimFlex language and its runtime support system, we can reduce cost and time in modeling software processes and perform convenient project management, producing well-qualified software products.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.297-306
• /
• 2008

This study was carried out to identify the characteristics of hydrochemistry controlling groundwater chemical condition in a repository site of Gyeongju. For this study, 12 bore holes of all monitoring bore holes in the study area were selected and total 46 groundwater samples were collected with depth. In addition, 3 surfacewater samples and 1 seawater sample were collected. For water samples, cations and anions were analyzed. The environmental isotopes(${\delta}^{18}O-{\delta}D$, Tritium, ${\delta}^{13}C,\;{\cdot}{\delta}^{34}S$) were also analyzed to trace the origin of water and solutes. The result of ${\delta}^{18}O\;and\;{\delta}D$ analysis showed that surface water and groundwater were originated from precipitation. Tritium concentrations of groundwater decreased with depth but high concentrations of tritium indicated that groundwater was recharged recently. The results of ion and correlation analysis showed that groundwater types of the study area were represented by Ca-Na-$HCO_3$ and Na-Cl-$SO_4$, which was caused by sea spray and water-rock interaction. Especially, high ratio of Na content in groundwater resulted from ion exchange. For redox condition of groundwater, the values of DO and Eh decreased with depth, which indicated that reducing condition was formed in deeper groundwater. In addtion, high concentration of Fe and Mn showed that redox condition of groundwater was controlled by the reduction of Fe and Mn oxides.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.1_spc
• /
• pp.273-298
• /
• 2008

The purpose of this study is to explore a risk and a protective factors of adolescent runaway based on the previous researches. Runaway of adolescents is increasing, and it is longer and more habit gradually than past. The prevailance methods of runaway is no longer effects on the decrease of adolescent runaway. Now there is to accept adolescent runaway, and has to support the difficult life conditions and the emotional distress of adolescent post-runaway. This means that must be identify and treatment the protective factors having an buffering effect as well as the risk factors influencing on runaway. Although the worse factors related family are the highest risk factors of runaway, others factors including negative peer relation, a academic stress also an have significant influence on runaway. And the protective factors mediating the negative influence of risk factors are an monitoring and controlling of parent as authoritative rearing attitude, a social support, a positive coping strategies, a self-esteem, and a conventional peer group. Protective factors prevent from runaway behavior, as well as improve a resilience of adolescents in the poor environment. The tasks of follow study are to investigate empirically the mediating effects of the protective factors on the problem behavior of post-runaway and resilience of runaway adolescents based on the systematic research design.