• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.39-45
• /
• 2006

This paper describes an effective and fast algorithm for GPS carrier-phase ambiguity resolution (AR) which can apply for structure monitoring, and a series of simulation analyses have been carried out to demonstrate the performance of the algorithm. The results show that single-frequency AR performance is significantly improved In term of Time-To-Fix-First (TTFF) ambiguity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.265-275
• /
• 2023

The purpose of this paper is to devise an optimal route allocation algorithm for automated vehicle(AV) in monitoring quality of road infrastructure to support the road safety. The tasks of an AV in this paper include visiting node-links at least once during its operation and checking status of road infrastructure, and coming back to its depot.. In selecting optimal route, its priority goal is visiting the node-links with higher risks while reducing costs caused by operation. To deal with the problem, authors devised reward maximizing algorithm for AVs. To check its validity, the authors developed simple toy network that mimic node-link networks and assigned costs and rewards for each node-link. With the toy network, the reward maximizing algorithm worked well as it visited the node-link with higher risks earlier then chinese postman route algorithm (Eiselt, Gendreau, Laporte, 1995). For further research, the reward maximizing algorithm should be tested its validity in a more complex network that mimic the real-life.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.144-155
• /
• 2013

This paper presents a low-cost remote power-quality-failure monitoring system (RPMS) using Android App and TI MCU (micro-controller unit), which is appliable to a micro-grid. The designed RPMS testbed consists of smart nodes, a server, and Android APPs. Especially, the C2000-series MCU-based RPMS smart node that is low-cost compared to existing monitoring systems has both a signal processing function for power signal processing and a data transmission function for power-quality monitoring data transmission. The signal processing function implements both a wavelet-based power failure detection algorithm including sag, swell, and interruption, and a FFT-based power failure detection algorithm including harmonics such that reliable and real-time power quality monitoring is guaranteed. The data transmission function implements a low-complexity RPMS transmission protocol and defines a simple data format (msg_Diag) for power monitoring message transmission. We may watch the monitoring data in real time both at a server and Android phone Apps connected to the WiFi network (or WAN). We use RS-232 (or Bluetooth) as the wired (or wireless) communication media between a server and nodes. We program the RPMS power-quality-failure monitoring algorithm using C language in the CCS (Code Composer Studio) 3.3 environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.183-183
• /
• 2000

In this paper, web-based remote monitoring for cold-rolling system is developed and the analysis of spatial control system is performed. The remote monitoring system is able to grasp the status of cold-rolling system regardless of time and locations. We analyzed spatial control algorithm of the system with the collected data. The usefulness of spatial control system is shown by simulation studies.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.249-255
• /
• 1999

Water pollution is becoming a serious problem in the populous cities and coastal areas near industrial complex. Sometimes, phytoplankton is considered as the most important element in the coastal environment. Phytoplankton is easily estimated by measuring chlorophyll content in the laboratory. In this study, to build up estimating algorithm of the chlorophyll amount related to the monitoring of coastal environments in Kwangyang bay, the correlationship the respective in situ observed data with Landsat TM and SeaWiFS satellite Image was analyzed. It showed that Landsat TM band 3 image has the highest correlationship with observed data, and based upon this result the monitoring algorithm of chlorophyll in coastal area was extracted. This algorithm will be an important for extracting and controlling environment elements in coastal areas in the future. And it has a significant meaning that it has established a spatial data construction in which satellite image alone could monitor the coastal environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.514-518
• /
• 1990

This paper describes an experimental Knowledge-Based Control System, named KBCS, for manufacturing and assembly. The KBCS of five parts and function : data-base, knowledge acquisition, optimization, and graphic monitoring. The KBCS is utilized for a FMS which is of five machine centers and automatic assembly lines. Each machine can perform almost all manufacturing functions which some difference in efficiency. Buffers store temporarily the incoming components and the outing components. Parts arrive at assembly lines after many steps of manufacturing, and the transfer path and time are determined by procedural knowledge of control systems. Nine different incoming components are set up. The total control system is expected to perform four algorithms, timing algorithm ,sequencing algorithm, penalty algorithm, and cart algorithm. The construction of controller require basic components of manufacturing systems in which knowledges are formulated on the base of the results and the repeated simulation of KBCS with graphic monitoring system. Simulation results by KBCS are compared with those by the other rules of manufacturing.

• Journal of Environmental Science International
• /
• v.23 no.7
• /
• pp.1307-1320
• /
• 2014

A number of problems associated with environmental noises in urban areas have significantly been considered. Specific measurement and estimation of the environmental noise became a primary issue in local governments. Environmental noise monitoring system is required in order to estimate and verify the a city noise map. However, current monitoring positions may not perfectly represent and incorporate many different view points, such as districts of a city, different utilizations of a city by the law, populations, and classifications and traffics of roads. In addition, scientific method to provide specific noise monitoring positions my not be avaliable in current literature. For this reason, the primary objective of this paper is to propose a new method for introducing a number of monitoring positions in the entire city. First, the quality function deployment (QFD) method was utilized to simultaneously represent both districts and utilizations of a city. Second, a new algorithm to find a number of monitoring positions was proposed by compromising many different view points: populations, classifications of roads and areas, and traffics of roads. Finally, the proposed monitoring positions and a sample noise map was provided for verification purposes. Based on these results, the proposed algorithm including the QFD concept may successfully provide specific noise monitoring positions by simultaneously consider may different view points and requirements of a city.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.706-711
• /
• 2001

This paper represents a relaxation matching algorithm based on global structure constraint satisfaction. Relaxation matching algorithm is a conventional approach to the matching problem. However, we confronted some problems such as null-matching and multi-matching problems by just using the relaxation matching technique. In order to solve the problems, in this paper, the matching problem is regarded as constraint satisfaction problem, and a relaxation matching algorithm is proposed based on global structure constraint satisfaction. The proposed algorithm is applied a landslide picture to show the effectiveness. When the algorithm is processed at landslide inspecting and monitoring system, motion parameters such as displacement area and its direction are computed. Once movement is recognized, displacements are estimated graphically with statistical amount in the image plane. Simulation has been done to prove the proposed algorithm by using time-sequence image of landslide inspection and monitoring system.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.6
• /
• pp.776-785
• /
• 2011

Since the Internet-based real-time Global Positioning System(GPS) synchronized widearea power system frequency monitoring network (FNET) was proposed in 2001, it has been monitoring the power system frequency in interconnected United States power systems and numerous interesting behaviors have been observed, including frequency excursion propagation. We address the consistency of a frequency excursion detection order of frequency disturbance recorders in FNET in relation to the same generation trip, as well as the ability to recreate by power systems dynamic simulation. We also propose a new method, as an application of FNET measurement, to locate a tripped generator using power systems dynamic simulation and wide-area frequency measurement. The simulation database of all the possible trips of generators in the interconnected power systems is created using the off-line power systems dynamic simulation. When FNET detects a sudden drop in the monitoring frequency, which is most likely due to a generation trip in power systems, the proposed algorithm locates a tripped generator by finding the best matching case of the measured frequency excursion in the simulation database in terms of the frequency drop detection order and the time of monitoring points.

• IE interfaces
• /
• v.19 no.1
• /
• pp.43-52
• /
• 2006

In order to make best use of NC machine tools with minimal labor costs, they need to be in operation 24 hours a day without being attended by human operators except for setup and tool changes. Thus, unattended machining is becoming a dream of every modern machine shop. However, without a proper mechanism for real-time monitoring of the machining processes, unattended machine could lead to a disaster. Investigated in this paper are ways to using PC camera as a real-time monitoring system for unattended NC milling operations. This study defined five machining states READY, NORMAL MACHINING, ABNORMAL MACHINING, COLLISION and END-OF-MACHINING and modeled them with DEVS (discrete event system) formalism. An image change detection algorithm has been developed to detect the table movements and a flame and smoke detection algorithm to detect unstable cutting process. Spindle on/off and cutting status could be successfully detected from the sound signals. Initial experimentation shows that the PC camera could be used as a reliable monitoring system for unattended NC machining.