• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.29-35
• /
• 2022

In this paper, we developed a workload index for monitoring the durability test using operation information of an excavator. First, the acceleration and cylinder pressure were selected as load factors by analyzing operation data. Through load correlation analysis according to each load factor, Root Mean Square (RMS) and Work Load Range (WLR) were respectively derived as a load feature representing mechanical load. In addition, the workload index was used to quantify load features. For applying the workload index to monitoring, a real-time monitoring system consisting of sensors and embedded controller was installed on the excavator and the system was integrated with a remote monitoring environment using a wireless network. Results of load monitoring and analysis verified that the developed workload index was effective from the viewpoint of the relative comparison of the workload.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.1
• /
• pp.17-24
• /
• 2010

There has been recent interest in intelligent vehicle technologies, such as advanced driver assistance systems (ADASs) or in-vehicle information systems (IVISs) that offer a significant enhancement of safety and convenience to drivers and passengers. However, unsuitable design of HMI (Human Machine Interface) must increase driver distraction and workload, which in turn increase the chance of traffic accidents. Distraction in particular often occurs under a heavy driving workload due to multitasking with various electronic devices like a cell phone or a navigation system while driving. According to the 2005 road traffic accidents in Korea report published by the ROad Traffic Authority (ROTA), more than 60% of the traffic accidents are related to driver error caused by distraction. This paper suggests the structure of vehicle environment for real-time driving behavior monitoring system while driving which is can be used the driver workload management systems (DWMS). On-road experiment results showed the feasibility of the suggested vehicle environment for driving behavior monitoring system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.303-307
• /
• 2002

Virtual hosting is a typical service to connect each directory of site and domain name. If traffic amounts may increase at one site present in the server, then it affects traffic amounts of other sites as well (including the sites which have flew requests). To overcome this problem, we suggest a simple feedback-control concept for the system by periodically monitoring the traffic and properly actuating traffic dispersions by investigating the log file. Specifically, large files are to be served in a backup server (to reduce the workload of the main server) by changing their own URL's in html format. In other words, it automatically redistributes the workload by using the URL. Furthermore, we also use the redirecting method by just adding html tags to html header. This method efficiently handles the workload and maintains the capability of the server effectively to the varying workload.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.179-182
• /
• 2015

Detecting and assessing human-related risks is critical to improve the on-site safety condition and reduce the loss in lives, time and budget for construction industry. Recent research in neural science and psychology suggest inattentional blindness that caused by overload in working memory is the major cause of unexpected human related accidents. Due to the limitation of human mental workload, laborers are vulnerable to unexpected hazards while focusing on complicated and dangerous construction tasks. Therefore, detecting the risk perception abilities of workers could help to identify vulnerable individuals and reduce unexpected injuries. However, there are no available measurement approaches or devices capable of monitoring construction workers' mental conditions. The research proposed in this paper aims to develop such a measurement framework to evaluate hazards through monitoring electroencephalogram of labors. The research team developed a wearable safety monitoring helmet, which can collect the brain waves of users for analysis. A bispectrum approach has been developed in this paper to enrich the data source and improve accuracy.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.192-199
• /
• 2015

Background: Overweight, obesity, and cardiovascular disease risk factors are prevalent among firefighters in some developed countries. It is unclear whether physical activity and cardiopulmonary fitness reduce cardiovascular disease risk and the cardiovascular workload at work in firefighters. The present study investigated the relationship between leisure-time physical activity, cardiopulmonary fitness, cardiovascular disease risk factors, and cardiovascular workload at work in firefighters in Hong Kong. Methods: Male firefighters (n = 387) were randomly selected from serving firefighters in Hong Kong (n = 5,370) for the assessment of cardiovascular disease risk factors (obesity, hypertension, diabetes mellitus, dyslipidemia, smoking, known cardiovascular diseases). One-third (Target Group) were randomly selected for the assessment of off-duty leisure-time physical activity using the short version of the International Physical Activity Questionnaire. Maximal oxygen uptake was assessed, as well as cardiovascular workload using heart rate monitoring for each firefighter for four "normal" 24-hour working shifts and during real-situation simulated scenarios. Results: Overall, 33.9% of the firefighters had at least two cardiovascular disease risk factors. In the Target Group, firefighters who had higher leisure-time physical activity had a lower resting heart rate and a lower average working heart rate, and spent a smaller proportion of time working at a moderate-intensity cardiovascular workload. Firefighters who had moderate aerobic fitness and high leisure-time physical activity had a lower peak working heart rate during the mountain rescue scenario compared with firefighters who had low leisure-time physical activities. Conclusion: Leisure-time physical activity conferred significant benefits during job tasks of moderate cardiovascular workload in firefighters in Hong Kong.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.347-354
• /
• 2013

In contrast to the increase in demand for high quality healthcare, there is limited medical human resources such as doctors and nurses so an excessive amount of workload is being forced to them. Therefore, a patient monitoring system using USN(Ubiquitous Sensor Network) is becoming a solution. This paper proposes a patient monitoring system applying USN in maternity hospital to reduce the workload of nurses. According to the efficiency evaluation test based on the model of two university hospitals(S, K University Hospital) and their doctor's diagnosis, the results showed that under the circumstances that one nurse is in charge of 12 patients(6 normal delivery patients and 6 cesarean delivery patients), a total of 1,260 minutes of workload was saved during hospitalization period(5 days). Also, we compared the workload of nurses with or without our proposed system, and the figures showed that in case of normal delivery patients, the workload of nurses decreased by 50 minutes per patient, whereas in case of cesarean delivery patients, the workload of nurses decreased by 130 minutes per patient.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1242-1242
• /
• 2022

Annually, several construction workers fall ill, are injured, or die due to heat-related exposure. The prevalence of work-related heat illness may rise and become an issue for workers operating in temperate climates, given the increase in frequency and intensity of heatwaves in the US. An increase in temperature negatively impacts physical exertion levels and mental state, thereby increasing the potential of accidents on the job site. To reduce the impact of heat stress on workers, it is critical to develop and implement measures for monitoring physical exertion levels and mental state in hot conditions. For this, limited studies have evaluated the utility of wearable biosensors in measuring physical exertion and mental workload in hot conditions. In addition, most studies focus solely on male participants, with little to no reference to female workers who may be exposed to greater heat stress risk. Therefore, this study aims to develop a process for objective and continuous assessment of worker physical exertion and mental workload using wearable biosensors. Physiological data were collected from eight (four male and four female) participants performing a simulated drilling task at 92oF and about 50% humidity level. After removing signal artifacts from the data using multiple filtering processes, the data was compared to a perceived muscle exertion scale and mental workload scale. Results indicate that biosensors' features can effectively detect the change in worker physical and mental state in hot conditions. Therefore, wearable biosensors provide a feasible and effective opportunity to continuously assess worker physical exertion and mental workload.

• Journal of the Korea Society for Simulation
• /
• v.12 no.3
• /
• pp.69-81
• /
• 2003

To manage a cluster of distributed server systems, a number of management aspects should be considered in terms of configuration management, fault management, performance management, and user management. System performance monitoring and reporting take an important role for performance and fault management. In this paper, we present distributed system architecture modeling of a performance monitoring and reporting tool. Modeling architecture of four subsystems are introduced: node agent, data collection, performance management & report, and DB schema. The performance-related information collected from distributed servers are categorized into performance counters, event data for system status changes, service quality, and system configuration data. In order to analyze those performance information, we use a number of ways to evaluate data corelation. By using some results from a real site of a company and from simulation of artificial workload, we show the example of performance collection and analysis. Since our report tool detects system fault or node component failure and analyzes performances through resource usage and service quality, we are able to provide information for server load balancing, in short term view, and the cause of system faults and decision for system scale-out and scale-up, in long term view.

• Journal of Korea Multimedia Society
• /
• v.9 no.7
• /
• pp.904-913
• /
• 2006

The QoS(Quality of Service) of VoD(Video on Demand) systems can be improved by reducing the faults that the stream service request from clients is rejected by the VoD server or lost during the service. This paper proposes a model of Dynamic Workload Balancer that can adjust the workload dynamically through the periodical monitoring of the VoD system, and so increase the throughput. The proposed model runs independently from the VoD system by adopting the agent concept. The model comprises the agency part interfacing the VoD system and the intelligence part reasoning or teaming the facts required for the adjustment of workload. An experiment of implementing a simulator was conducted to see whether or not application of the proposed model to VoD system is effective. As a result of the experiment, it was found that the throughput was relatively increased when the proposed model was applied compared to existing means.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.31 no.4
• /
• pp.51-61
• /
• 2013