• Smart Structures and Systems
• /
• v.31 no.3
• /
• pp.283-299
• /
• 2023

Structural stability of floating platforms has long since been a crucial issue in the field of marine engineering. Excessive motions would not only deteriorate the operating conditions but also seriously impact the safety, service life, and production efficiency. In recent decades, several control devices have been proposed to reduce unwanted motions, and an attractive one is the tuned heave plate (THP). However, the THP system may reduce or even lose its effectiveness when it is mistuned due to the shift of dominant wave frequency. In the present study, a novel adaptive tuned heave plate (ATHP) is proposed based on inerter by adjusting its inertance, which allows to overcome the limitation of the conventional THP and realize adaptations to the dominant wave frequencies in real time. Specifically, the analytical model of a representative semisubmersible platform (SSP) equipped with an ATHP is created, and the equations of motion are formulated accordingly. Two optimization strategies (i.e., J₁ and J₂ optimizations) are developed to determine the optimum design parameters of ATHP. The control effectiveness of the optimized ATHP is then examined in the frequency domain by comparing to those without control and controlled by the conventional THP. Moreover, parametric analyses are systematically performed to evaluate the influences of the pre-specified frequency ratio, damping ratio, heave plate sizes, peak periods and wave heights on the performance of ATHP. Furthermore, a Simulink model is also developed to examine the control performance of ATHP in the time domain. It is demonstrated that the proposed ATHP could adaptively adjust the optimum inertance-to-mass ratio by tracking the dominant wave frequencies in real time, and the proposed system shows better control performance than the conventional THP.

• International Journal of Computer Science & Network Security
• /
• v.23 no.7
• /
• pp.155-164
• /
• 2023

Machine learning with its high precision algorithms, Precision agriculture (PA) is a new emerging concept nowadays. Many researchers have worked on the quality and quantity of PA by using sensors, networking, machine learning (ML) techniques, and big data. However, there has been no attempt to work on trends of artificial intelligence (AI) techniques, dataset and crop type on precision agriculture using internet of things (IoT). This research aims to systematically analyze the domains of AI techniques and datasets that have been used in IoT based prediction in the area of PA. A systematic literature review is performed on AI based techniques and datasets for crop management, weather, irrigation, plant, soil and pest prediction. We took the papers on precision agriculture published in the last six years (2013-2019). We considered 42 primary studies related to the research objectives. After critical analysis of the studies, we found that crop management; soil and temperature areas of PA have been commonly used with the help of IoT devices and AI techniques. Moreover, different artificial intelligence techniques like ANN, CNN, SVM, Decision Tree, RF, etc. have been utilized in different fields of Precision agriculture. Image processing with supervised and unsupervised learning practice for prediction and monitoring the PA are also used. In addition, most of the studies are forfaiting sensory dataset to measure different properties of soil, weather, irrigation and crop. To this end, at the end, we provide future directions for researchers and guidelines for practitioners based on the findings of this review.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.512-517
• /
• 2023

In this study, we propose a liquid crystal-based polarization control technology that can control polarization by adjusting the voltage applied to the liquid crystal, and apply it to a Closed-circuit Television (CCTV) to transmit only the desired angle of polarized light. CCTV with conventional polarizing films cannot control polarization because they focus on backlight compensation, so light reflected from the water surface or highlights reflected from vehicles interfere with subject identification. However, the Vertical Alignment mode allows the polarization to be adjusted electrically, so that only the polarized light at the user's desired angle is transmitted, eliminating reflected highlights. The images obtained using this technique are optimized by computer software. Liquid crystal polarization panels, which can electrically control the polarization angle, transmittance, and polarization rate, have been applied to polarized image monitoring device to improve subject identification in conventional CCTV.

• Korean Journal of Culture and Social Issue
• /
• v.14 no.1_spc
• /
• pp.135-152
• /
• 2008

The purpose of this study is to research psychological and social devices to foster self-regulated learning of Korean adolescents. This study investigated metacognitive, motivational, and behavioral factors of self-regulated learning through current research. In terms of metacognitive factors, we reviewed the importance of cognitive and metacognitive learning strategies of adolescents for better self-regulated learning. Especially we gave a great emphasis on the role of comprehension monitoring metacognitive strategy for the learning to read in this review. For motivational factors, recent research of self-regulated learning has tended to focus on self-efficacy and goal orientation. The current research examining behavioral factors of self-regulated learning has tended to focus on time management and academic procrastination. Research findings in the motivational aspect suggest that we need to develop the program to improve adolescents' self-efficacy and recognize new re-conceptualization of the goal theory. Research findings in the behavioral aspect recommend practical tips and strategies to improve time management skills and to overcome academic procrastination. Finally, future directions for research are discussed.

• Composites Research
• /
• v.36 no.5
• /
• pp.342-348
• /
• 2023

There has been increasing demand for real-time monitoring of body and ambient temperatures using wearable devices. Graphene-based thermistors have been developed for high-performance flexible temperature sensors. In this study, the temperature coefficient of resistance (TCR) of monolayer graphene was controlled by coating polyethylenimine (PEI) on graphene surfaces to enhance its temperature-sensing performances. Monolayer graphene grown by chemical vapor deposition (CVD) was wet-transferred onto a target substrate. To facilitate the interfacial doping by PEI, the hydrophobic graphene surface was altered to be hydrophilic by oxygen plasma treatments while minimizing defect generation. The effect of PEI doping on graphene was confirmed using a back-gated field-effect transistor (FET). The CVD-grown monolayer graphene coated with PEI exhibited an improved TCR of -0.49(±0.03) %/K in a temperature range of 30~50℃.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.147-156
• /
• 2024

This paper introduces the design of a turtle neck posture correction and prevention system for users of digital devices for a long time. The number of forward head posture patients in Korea increased by 13% from 2018 to 2021, and has not yet improved according to the latest statistics at the present time. Because of the nature of the disease, prevention is more important than treatment. Therefore, in this paper, we designed a system based on built-camera in most laptops to increase the accessiblility of the system, and utilize the features such as Pose Estimation, Face Landmarks Detection, Iris Tracking, and Depth Estimation of Google Mediapipe to prevent the need to produce artificial intelligence models and allow users to easily prevent forward head posture.

• Progress in Medical Physics
• /
• v.34 no.3
• /
• pp.33-39
• /
• 2023

Purpose: FLASH radiotherapy (RT) using ultra-high dose rate (>40 Gy/s) radiation is being studied worldwide. However, experimental studies such as preclinical studies using small animals are difficult to perform due to the limited availability of irradiation devices and methods for generating a FLASH beam. In this paper, we report the initial dosimetry results of a prototype electron linear accelerator (LINAC)-based irradiation system to perform ultra-high dose rate (UHDR) preclinical experiments. Methods: The present study used the prototype electron LINAC developed by the Research Center of Dongnam Institute of Radiological and Medical Sciences (DIRAMS) in Korea. We investigated the beam current dependence of the depth dose to determine the optimal beam current for preclinical experiments. The dose rate in the UHDR region was measured by film dosimetry. Results: Depth dose measurements showed that the optimal beam current for preclinical experiments was approximately 33 mA, corresponding to a mean energy of 4.4 MeV. Additionally, the average dose rates of 80.4 Gy/s and 162.0 Gy/s at a source-to-phantom surface distance of 30 cm were obtained at pulse repetition frequencies of 100 Hz and 200 Hz, respectively. The dose per pulse and instantaneous dose rate were estimated to be approximately 0.80 Gy and 3.8×10⁵ Gy/s, respectively. Conclusions: Film dosimetry verified the appropriate dose rates to perform FLASH RT preclinical studies using the developed electron-beam irradiator. However, further research on the development of innovative beam monitoring systems and stabilization of the accelerator beam is required.

• International Journal of Computer Science & Network Security
• /
• v.24 no.6
• /
• pp.207-215
• /
• 2024

Cloud computing is now used by most companies, business centres and academic institutions to embrace new computer technology. Cloud Service Providers (CSPs) are limited to certain services, missing some of the assets requested by their customers, it means that different clouds need to interconnect to share resources and interoperate between them. The clouds may be interconnected in different characteristics and systems, and the network may be vulnerable to volatility or interference. While information technology and cloud computing are also advancing to accommodate the growing worldwide application, criminals use cyberspace to perform cybercrimes. Cloud services deployment is becoming highly prone to threats and intrusions. The unauthorised access or destruction of records yields significant catastrophic losses to organisations or agencies. Human intervention and Physical devices are not enough for protection and monitoring of cloud services; therefore, there is a need for more efficient design for cyber defence that is adaptable, flexible, robust and able to detect dangerous cybercrime such as a Denial of Service (DOS) and Distributed Denial of Service (DDOS) in heterogeneous cloud computing platforms and make essential real-time decisions for forensic investigation. This paper aims to develop a framework for digital forensic for the detection of cybercrime in a joined heterogeneous cloud setup. We developed a Digital Forensics model in this paper that can function in heterogeneous joint clouds. We used Unified Modeling Language (UML) specifically activity diagram in designing the proposed framework, then for deployment, we used an architectural modelling system in developing a framework. We developed an activity diagram that can accommodate the variability and complexities of the clouds when handling inter-cloud resources.

• Clinical and Experimental Pediatrics
• /
• v.51 no.9
• /
• pp.992-997
• /
• 2008

Purpose : Hypertension (HTN) is no longer an exclusively adult disease; the prevalence of pediatric HTN is increasing. To understand the evaluation and treatment of childhood HTN in Korea, we investigated, via a questionnaire, how hypertensive children are currently assessed and managed by pediatric cardiologists (CA) and nephrologists (NE). Methods : We surveyed 82 pediatric CA and 77 NE, regarding how they manage hypertensive children in Korea. Results : A total 75 replies were received to our questionnaire request (response rate: 47.15%). Routine blood pressure (BP) checks were more frequently performed by NE (CA: 5.7%, NE: 25%, P=0.03), but most respondents (86%) did not check BP routinely. Mercury sphygmomanometers were the most commonly used devices and ambulatory blood pressure monitoring was not frequently used. The goal BP in treated patients was set at the 95th percentile by 61% of respondents. NE used a lower BP goal in hypertensive children with renal disease (CA: 24%, NE: 64%, P=0.004) or DM (CA: 12.5%, NE: 50%, P=0.003). Angiotensin converting enzyme (ACE) inhibitors were the most commonly used agents (mean: 59%); following ACE inhibitors, CA preferred diuretics for hypertensive children with renal disease or cardiovascular disease, and NE preferred calcium channel blockers, regardless of underlying disease. Self-monitoring was the most frequent method for BP monitoring at home. Conclusion : In Korea, BP measurement is not yet a routine examination in treating hypertension. There are some differences in management strategies vis-$\grave{a}$-vis hypertension, between pediatric cardiologists and nephrologists. For the appropriate management and prevention of secondary disease in long-term studies, standard guidelines and education are needed for pediatricians.

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.14 no.1
• /
• pp.29-39
• /
• 2014

Background: Dental phobia or anxiety of patients is the serious impediment to appropriate and effective dental treatment. Sedative technique helps to mitigate patients' fear and anxiety thus make them more cooperative and familiar to dental practices. With increasing attention to sedative dentistry in dentists, educational requirements and technical qualification also become stricter but actual survey on recent sedative dentistry has not been reported yet. Especially there is insufficient study reporting the survey of sedative dentistry subjected to Korean adults. In this paper, we conducted a survey study on the actual condition and practice related to sedation with a questionnaire to dentists in South Korea. Methods: The survey was done for members of The Korean Dental Society of Anesthesiology (KDSA), who had great interest in sedation and for whom survey-by-mail was convenient. 472 members of The KDSA having dental license and solid address and contact information were subjected to the survey by sending them survey questions about their sedative techniques and knowledge. In order to increase the response rate, small gifts were presented to those who accurately responded to the survey questions and text messages and phone calls were made to encourage their participation. We collected their responses over two months and examined the returned surveys. Statistical analysis was performed using IBM SPSS Statistics 21 for each question. Results: Out of 472 dentists, 181 responded (38.4% response rate). 63.0% (114 dentists; 77 male and 37 female) of respondents had experience on sedative technique and their average age was $39.8{\pm}7.6$ year. 74 of them were private practitioners, 17 of them were professors (14.9%), 11 of them were dentists-in-service (9.6%), 11 of them were residents (specialist training) (9.6%) and 1 of them was military doctors (0.9%). There were 89 dentists (78.1%) who were specialists or receiving trainings to be specialist, most of whom were pediatric dentists (55, 48.2%) and oral surgeon (31, 27.2%). The most popular route for drug medications was orderly oral, inhalational, intravenous medication. Combination of oral and inhalational medications or single use of intravenous medication was the most common. The most preferred sedative drug was pocral in oral sedation and midazolam in intravenous sedation. 48.2% of practitioners responded that they experienced side effects and emergency situations. Airway obstruction was the most frequent. Conclusions: Results from the survey show that the protocol and system for sedative dentistry have been improved compared to the past. Nevertheless, quality of emergency protocol, monitoring devices and preparation of sedative drugs was still insufficient to achieve safe sedative procedure. This study acquires novelty since actual survey on recent sedative dentistry for adult patients has not been reported yet.