• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.711-722
• /
• 2011

Beam-column gravity or Intermediate Moment frames subjected to unexpected large displacements are vulnerable when no seismic details are provided, which is typical. Conversely, economic efficiency of those frames is decreased if unnecessary special detailing is applied as the beam and column size becomes quite large and steel congestion is caused by joint transverse reinforcement in beam-column connections. Moderate seismic design is used in Korea for beam-column connections of buildings with structural walls, which are to be destroyed when the unexpected large earthquake occurs. Nonetheless, performance of such beamcolumn connections may be substantially improved by the addition of steel fibers. This study was conducted to investigate the effect of steel fibers in reinforced concrete exterior beam-column connections and possibility for the replacement of some joint transverse reinforcement. Ten half-scale beam-column connections with non-seismic details were tested under cyclic loads with two cycles at each drift up to 19 cycles. Main test parameters used were the volume ratio of steel fibers (0%, 1%, 1.5%) and joint transverse reinforcement amount. The test results show that maximum capacity, energy dissipation capacity, shear strength and bond condition are improved with the application of steel fibers to substitute transverse reinforcement of beam-column connections. Furthermore, several shear strength equations for exterior connections were examined, including the proposed equation for steel fiber-reinforced concrete exterior connections with non-seismic details.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.73-80
• /
• 2022

In this study, details of NRC beam-column connections were developed in which beam and columns pre-assembled in factories using steel angles were bolted on site. The developed joint details are NRC-J type and NRC-JD type. NRC-J type is a method of tensile joining with TS bolts to the side and lower surfaces of the side plate of the NRC column and the end plate of the NRC beam. NRC-JD type has a rigid joint with high-strength bolts between the NRC beam and the side of the NRC column for shear, and with lap splices of reinforcing bar penetrating the joint and the beam main reinforcement for bending. For the seismic performance evaluation of the joint, three specimens were tested: an NRC-J specimen and NRC-JD specimen with NRC beam-column joint details, and an RC-J specimen with RC beam-column joint detail. As a result of the repeated lateral load test, the final failure mode of all specimens was the bending fracture of the beam at the beam-column interface. Compared to the RC-J specimen, the maximum strength of the specimen by the positive force was 10.1% and 29.6% higher in the NRC-J specimen and the NRC-JD specimen, respectively. Both NRC joint details were evaluated to secure ductility of 0.03 rad or more, the minimum total inter-story displacement angle required for the composite intermediate moment frame according to the KDS standard (KDS 41 31 00). At the slope by relative storey displacemet of 5.7%, the NRC-J specimen and the NRC-JD specimen had about 34.8% and 61.1% greater cumulative energy dissipation capacity than the RC specimen. The experimental strength of the NRC beam-column connection was evaluated to be 30% to 53% greater than the theoretical strength according to the KDS standard formula, and the standard formula evaluated the joint performance as a safety side.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.7 no.1
• /
• pp.861-876
• /
• 1965

During my stay in the Netherlands, I have studied the following, primarily in relation to the Mokpo Yong-san project which had been studied by the NEDECO for a feasibility report. 1. Unit hydrograph at Naju There are many ways to make unit hydrograph, but I want explain here to make unit hydrograph from the- actual run of curve at Naju. A discharge curve made from one rain storm depends on rainfall intensity per houre After finriing hydrograph every two hours, we will get two-hour unit hydrograph to devide each ordinate of the two-hour hydrograph by the rainfall intensity. I have used one storm from June 24 to June 26, 1963, recording a rainfall intensity of average 9. 4 mm per hour for 12 hours. If several rain gage stations had already been established in the catchment area. above Naju prior to this storm, I could have gathered accurate data on rainfall intensity throughout the catchment area. As it was, I used I the automatic rain gage record of the Mokpo I moteorological station to determine the rainfall lntensity. In order. to develop the unit ~Ydrograph at Naju, I subtracted the basic flow from the total runoff flow. I also tried to keed the difference between the calculated discharge amount and the measured discharge less than 1O~ The discharge period. of an unit graph depends on the length of the catchment area. 2. Determination of sluice dimension Acoording to principles of design presently used in our country, a one-day storm with a frequency of 20 years must be discharged in 8 hours. These design criteria are not adequate, and several dams have washed out in the past years. The design of the spillway and sluice dimensions must be based on the maximun peak discharge flowing into the reservoir to avoid crop and structure damages. The total flow into the reservoir is the summation of flow described by the Mokpo hydrograph, the basic flow from all the catchment areas and the rainfall on the reservoir area. To calculate the amount of water discharged through the sluiceCper half hour), the average head during that interval must be known. This can be calculated from the known water level outside the sluiceCdetermined by the tide) and from an estimated water level inside the reservoir at the end of each time interval. The total amount of water discharged through the sluice can be calculated from this average head, the time interval and the cross-sectional area of' the sluice. From the inflow into the .reservoir and the outflow through the sluice gates I calculated the change in the volume of water stored in the reservoir at half-hour intervals. From the stored volume of water and the known storage capacity of the reservoir, I was able to calculate the water level in the reservoir. The Calculated water level in the reservoir must be the same as the estimated water level. Mean stand tide will be adequate to use for determining the sluice dimension because spring tide is worse case and neap tide is best condition for the I result of the calculatio 3. Tidal computation for determination of the closure curve. During the construction of a dam, whether by building up of a succession of horizontael layers or by building in from both sides, the velocity of the water flowinii through the closing gapwill increase, because of the gradual decrease in the cross sectional area of the gap. 1 calculated the . velocities in the closing gap during flood and ebb for the first mentioned method of construction until the cross-sectional area has been reduced to about 25% of the original area, the change in tidal movement within the reservoir being negligible. Up to that point, the increase of the velocity is more or less hyperbolic. During the closing of the last 25 % of the gap, less water can flow out of the reservoir. This causes a rise of the mean water level of the reservoir. The difference in hydraulic head is then no longer negligible and must be taken into account. When, during the course of construction. the submerged weir become a free weir the critical flow occurs. The critical flow is that point, during either ebb or flood, at which the velocity reaches a maximum. When the dam is raised further. the velocity decreases because of the decrease\ulcorner in the height of the water above the weir. The calculation of the currents and velocities for a stage in the closure of the final gap is done in the following manner; Using an average tide with a neglible daily quantity, I estimated the water level on the pustream side of. the dam (inner water level). I determined the current through the gap for each hour by multiplying the storage area by the increment of the rise in water level. The velocity at a given moment can be determined from the calcalated current in m3/sec, and the cross-sectional area at that moment. At the same time from the difference between inner water level and tidal level (outer water level) the velocity can be calculated with the formula $h= \frac{V^2}{2g}$ and must be equal to the velocity detertnined from the current. If there is a difference in velocity, a new estimate of the inner water level must be made and entire procedure should be repeated. When the higher water level is equal to or more than 2/3 times the difference between the lower water level and the crest of the dam, we speak of a "free weir." The flow over the weir is then dependent upon the higher water level and not on the difference between high and low water levels. When the weir is "submerged", that is, the higher water level is less than 2/3 times the difference between the lower water and the crest of the dam, the difference between the high and low levels being decisive. The free weir normally occurs first during ebb, and is due to. the fact that mean level in the estuary is higher than the mean level of . the tide in building dams with barges the maximum velocity in the closing gap may not be more than 3m/sec. As the maximum velocities are higher than this limit we must use other construction methods in closing the gap. This can be done by dump-cars from each side or by using a cable way.e or by using a cable way.

• Journal of The Association for Neo Medicine
• /
• v.2 no.1
• /
• pp.35-54
• /
• 1997

We tried to observe the features of ancient medical practice by analysing the records related to medicine in the book, ${\ulcorner}$the Historical Records of the Three Kingdom${\lrcorner}$ of which content includes the features of medicine in mythology, plague, delivery of twins, drugs, medical system, shamanism, constitutional medicine, psychiatry, forensic medicine, deformity, a spa, medical phrase, health and welfare work, religion, death. physiological anatomy, Taoist medicine, acupuncture, the occult af of transformation and etc. Our initial concern was about where to draw line as of medical field and we defined medicine in more broad meaning. The book ${\ulcorner}$the Historical Records of the Three Kingdoms${\lrcorner}$ describes the world of mythology by way of medicine which is not clearly a conventional one. There appears records of birth of multiple offsprings 7 times in which cases are of triplets or more. Delivering multiple offsprings were rare phenomenon though such fertility was highly admired. This shows one aspect of ancient country having more population meant more power of the nation. Of those medical records conveyed in that book includes stories of childbirth such as giving birth to a son after praying, giving birth to Kim Yoo-shin after 20 months after mother's dream of conception, and a song longing for getting a laudable child. Plagues were prevalent throughout winter to spring season and one can observe various symptoms of plagues in the record. Of these epidemic diseases, cold type might have been more common than the heat one. Appearance of epidemic diseases frequently coincided with that of natural disasters that this suggests a linkage between plague and underlying doctrine on five elements' motion and six kinds of natural factors. There exists only a few names of diseases such as epidemic disease, wind disease, and syndrome characterized by dyspnea. Otherwise there appeared only afflictions that were not specified therefore it remains cluless to keep track of certain diseases of prevalence. Since this ${\ulcorner}$Historical Records of the Three Kingdoms'${\lrcorner}$ wasn't any sort of medical book, words and terms used were not technical kind and most were the ones used generally among lay people. Therefore any mechanisms of the diseases were hardly mentioned. Some of medicinal substances such as Calculus Bovis, Radix Ginseng, Gaboderma Luciderm, magnetitum were also in use in those days. 53 kinds of dietary supplies appears in the records and some of these might have been used as medicinal purpose. Records concerning dicipline of one's body includes activities such as hunting, archery, horseback riding etc. In Shilla dynasty there were positions such as professor of medicine, Naekongbong(內供奉), Kongbong's doctor(供奉醫師), Kongbong's diviner(供奉卜師). As an educational facility, medical school was built at the first year of King Hyoso's reign and it's curricula included various subjects as ${\ulcorner}$Shin Nong's Herbal classic${\lrcorner}$, ${\ulcorner}$Kabeul classic of acupuncture and moxbustion${\lrcorner}$, ${\ulcorner}$The Plain Questions of the Yellow Emperor's Classic of Internal Medicine${\lrcorner}$, ${\ulcorner}$Classic of Acupuncturer${\lrcorner}$, ${\ulcorner}$The Pulse Classic${\lrcorner}$, ${\ulcorner}$Classic of Channels and Acupuncture Points${\lrcorner}$ and ${\ulcorner}$Difficult Classic${\lrcorner}$. There were 2 medical professors who were in charge of education. To establish pharmacopoeia, 2 Shaji(舍知), 6 Sha(史), 2 Jongshaji(從舍知) were appointed. In Baekje dynasty, Department of Herb was maintained. Doing praying for the sake of health, doing phrenology also can be extended to medical arena. Those who survived over 100 years of age appear 3 times in the record, while 98 appears once. The earliest psychiatrist Nokjin differentiated symptoms to apply either therapies using acupuncture and drug or psychotherapy. There appears a case of rape, a case of burying alive with the dead, 8 cases of suicide that can characterize a prototype of forensic medicine. Deformity-related records include phrases as follow: 'there seems protrudent bone behind the head', 'a body which has two heads, two trunks, four arms.', 'a body equipped with two heads' In those times spa can be said to be used as a place for he리ing, convalescence, and relaxation seeing the records describing a person pretended illness and went to spa to enjoy with his friends. Priest doctors and millitary surgeons were in charge of the medical sevice in the period of the Three Kingdoms by the record written by Mookhoja(墨胡子) and Hoonkyeom(訓謙). Poor diet and regimen makes people more vulnerable to diseases. So there existed charity services for those poor people who couldn't live with one's own capacity such as single parents, orphans, the aged people no one to take care and those who are ill. The cause of affliction was frequently coined with human relation. There appeared the phenomenon of releasing prisoners and allowing people to become priests at the time of king's suffering. Besides, as a healing procedure, sutra-chanting was peformed. There appears 10 cases of death related records which varies from death by drowning, or by freezing, death from animals, death from war, death from wightloss and killing oneself at the moment of spouse's death and etc. There also exist certain records which suggest the knowledge of physiology and anatomy in those times. Since the taoist books such as ${\ulcorner}$Book of the Way and Its Power(老子道德經)${\lrcorner}$ were introduced in the period of Three Kingdoms, it can be considered that medicine was also influenced by taoism. Records of higher level of acupuncture, records which links the medicine and occult art of transformation existed. Although limited, we could figure out the medical state of ancient society.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.25 no.1
• /
• pp.34-40
• /
• 2021

Purpose If a new test is introduced or reagents are changed in the laboratory of a medical institution, the characteristics of the test should be analyzed according to the procedure and the assessment of reagents should be made. However, several necessary conditions must be met to perform all required comparative evaluations, first enough samples should be prepared for each test, and secondly, various reagents applicable to the comparative evaluations must be supplied. Even if enough comparative evaluations have been done, there is a limit to the fact that the data variation for the new reagent represents the overall patient data variation, The fact puts a burden on the laboratory to the change the reagent. Due to these various difficulties, reagent changes in the laboratory are limited. In order to introduce a competitive bid, the institute conducted a full investigation of Radioimmunoassay(RIA) reagents for each test and established the range of reagents available in the laboratory through comparative evaluations. We wanted to share this process. Materials and Methods There are 20 items of tests conducted in our laboratory except for consignment tests. For each test, RIA reagents that can be used were fully investigated with the reference to external quality control report. and the manuals for each reagent were obtained. Each reagent was checked for the manual to check the test method, Incubation time, sample volume needed for the test. After that, the primary selection was made according to whether it was available in this laboratory. The primary selected reagents were supplied with 2kits based on 100tests, and the data correlation test, sensitivity measurement, recovery rate measurement, and dilution test were conducted. The secondary selection was performed according to the results of the comparative evaluation. The reagents that passed the primary and secondary selections were submitted to the competitive bidding list. In the case of reagent is designated as a singular, we submitted a explanatory statement with the data obtained during the primary and secondary selection processes. Results Excluded from the primary selection was the case where TAT was expected to be delayed at the moment, and it was impossible to apply to our equipment due to the large volume of reagents used during the test. In the primary selection, there were five items which only one reagent was available.(squamous cell carcinoma Ag(SCC Ag), β-human chorionic gonadotropin(β-HCG), vitamin B12, folate, free testosterone), two reagents were available(CA19-9, CA125, CA72-4, ferritin, thyroglobulin antibody(TG Ab), microsomal antibody(Mic Ab), thyroid stimulating hormone-receptor-antibody(TSH-R-Ab), calcitonin), three reagents were available (triiodothyronine(T3), Tree T3, Free T4, TSH, intact parathyroid hormone(intact PTH)) and four reagents were available are carcinoembryonic antigen(CEA), TG. In the secondary selection, there were eight items which only one reagent was available.(ferritin, TG, CA19-9, SCC, β-HCG, vitaminB12, folate, free testosterone), two reagents were available(TG Ab, Mic Ab, TSH-R-Ab, CA125, CA72-4, intact PTH, calcitonin), three reagents were available(T3, Tree T3, Free T4, TSH, CEA). Reasons excluded from the secondary selection were the lack of reagent supply for comparative evaluations, the problems with data reproducibility, and the inability to accept data variations. The most problematic part of comparative evaluations was sample collection. It didn't matter if the number of samples requested was large and the capacity needed for the test was small. It was difficult to collect various concentration samples in the case of a small number of tests(100 cases per month or less), and it was difficult to conduct a recovery rate test in the case of a relatively large volume of samples required for a single test(more than 100 uL). In addition, the lack of dilution solution or standard zero material for sensitivity measurement or dilution tests was one of the problems. Conclusion Comparative evaluation for changing test reagents require appropriate preparation time to collect diverse and sufficient samples. In addition, setting the total sample volume and reagent volume range required for comparative evaluations, depending on the sample volume and reagent volume required for one test, will reduce the burden of sample collection and planning for each comparative evaluation.