• Journal of the Korean Geotechnical Society
• /
• v.24 no.7
• /
• pp.61-73
• /
• 2008

Piles of a bridge pier are connected with the column through the pile cap (footing). Behavior of the pile foundation can be different according to the connection method between piles and the pile cap. Connection methods between pile heads and the pile cap are divided into two groups : rigid connections and hinge connections. Domestic design code has been specified to use rigid connection method for the highway bridge. In the rigid connection method, maximum bending moment of a pile occurs at the pile head and this helps the pile to prevent the excessive displacement. Rigid methods are also good to improve the seismic performance. However, some specifications prescribe that conservative results through investigations of both the fixed-head condition and the free-head condition should be reflected in the design. This statement may induce an over-estimated design for the bridge which has high-quality structures with casing covered drilled shafts and the PC-house contained pile cap. Because the assumption of free-head conditions (hinge connections) is unreal for the elevated pile cap system with multiple piles of the long span sea-crossing bridges. On the other hand, elastic displacement method to evaluate the pile reactions under the pile cap is not suitable for this type of bridges due to impractical assumptions. So, full modeling techniques which analyze the superstructure and the substructure simultaneously should be performed. Loads and stress state of the large diameter drilled shaft and the pile cap for Incheon Bridge which will be the longest bridge of Korea were investigated through the full modeling for rigid connection conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.12-20
• /
• 2023

This study presents basic data on how to secure stability by analyzing the change in tensile force of steel rod and the inclination characteristics of PSC BOX in the "Temporary fixation system using internal prestressing tendon", which is mainly applied to construction of superstructures by FCM. To date, it has been difficult to confirm the changes in tension force of the steel rod and the inclination of the PSC BOX because the steel rod was installed vertically inside the pier and the PSC BOX. Therefore, measurement of the change in length of the steel rod and the displacement of PSC BOX were performed using a micro-measured FBG sensor. Comparisons of the calculated tensile force and the residual tensile force of the steel rod revealed that the safety factor decreased in all bridges. The cause was mainly identified to be the loss of tensile force in fixation~1segment, and countermeasures are suggested. The analysis of the inclination characteristics showed that the inclination increased with the segment progresses even in bridges with sufficient safety factor, and the difference before and after the segment was confirmed. In addition, the increase in inclination was related to the loss of tension force in the steel rod, and the stress on the opposite sides of the inclination was further reduced. It is believed that upward tensile force is generated in the steel rod on the opposite side of the inclined side due to the unbalanced moment, causing the difference in stress of the steel rod between the two sides.

• Design Convergence Study
• /
• v.15 no.3
• /
• pp.117-131
• /
• 2016

The introduction of comprehensive programming channels has led to a diversity in the viewers' tastes and excessive competition between TV channels. Demand for channels on well-being is also increasing, due to the well-being and green consumption trends. This study conducted a case study on domestic and international channel branding strategies as well as an analysis on Korean channels focusing on well-being and lifestyle and found that there are no TV channels which provides comprehensive well-being information on food, clothing and housing at the moment in Korea. This study further discovered that information on such topics are currently provided in a tidbit fashion via educational or entertainment programs. Therefore, this study presented strategies for a well-being lifestyle channel brand and designed the brand mark and a station ID for the channel. This study conducted a survey targeting 50 men and women over 20 who have participated in environment-related projects for an objective verification of the channel brand strategies and design. The survey showed that the respondents were generally positive towards the necessity of the channel and of the content presented by this researcher. Some of the respondents, however, pointed out that the readability of the brand mark needs to be improved. This was reflected in the improved design and a survey comparing the two designs showed positive results. The results of this study will contribute to the launch of a well-being lifestyle channel targeting green consumers in the future.

• 한국체육학회지인문사회과학편
• /
• v.55 no.2
• /
• pp.643-655
• /
• 2016

The purpose of this study was to investigate biomechanical differences between young and old adults during downhill walking on a treadmill in order to understand the mechanisms of elderly falls. Eighteen healthy young females(YG: yrs: 21.17±1.5) and eighteen healthy old females(OG: yrs: 66.67±1.33) participated in this study. They were asked to walk at their preferred speed on a treadmill at level, 7.5° and 15° decline. OG walked more wobbly in the medial and lateral directions than YG(p<.05). As slope got steeper, OG had smaller ROM(range of motion) of ankle and knee joints compared with YG. However, there was no difference in ROM of the hip between OG and YG, but maximum extension angle of OG was smaller compared with YG(p<.05). Smaller extensor moment was generated on OG during downhill walking(p<.05). It was hypothesized that more risk factors would be found on older people compared to young people during downhill. However, older people actually walks with a safer strategy compared to young people during downhill. Finally, current findings about biomechanical characteristics of elderly walking would provide useful fundamental information for a follow-up study regarding the prevention of elderly fall during their daily life.

• Earthquakes and Structures
• /
• v.24 no.6
• /
• pp.455-475
• /
• 2023

The present study investigates the non-linear soil-pile interaction using three-dimensional (3D) non-linear finite element models. The numerical models were validated by using the results of extensive pile load and shaking table tests. The pile performance in liquefiable and non-liquefiable soil has been studied by analyzing the liquefaction ratio, pile lateral displacement (LD), pile bending moment (BM), and frictional resistance (FR) results. The pile models have been developed for the different ground conditions. The study reveals that the results obtained during the pile load test and shaking cycles have good agreement with the predicted pile and soil response. The soil density, peak ground acceleration (PGA), slenderness ratio (L/D), and soil condition (i.e., dry and saturated) are considered during modeling. Four ground motions are used for the non-linear time history analyses. Consequently, design charts are proposed depended on the analysis results to be used for design practice. Eleven models have been used to validate the capability of these charts to capture the soil-pile response under different seismic intensities. The results of the present study demonstrate that L/D ratio slightly affects the lateral displacement when compared with other parameters. Also, it has been observed that the increasing in PGA and decreasing L/D decreases the excess pore water pressure ratio; i.e., increasing PGA from 0.1 g to 0.82 g of loose sand model, decrease the liquefaction ratio by about 50%, and increasing L/D from 15 to 75 of the similar models (under Kobe earthquake), increase this ratio by about 30%. This study reveals that the lateral displacement increases nonlinearly under both dry and saturated conditions as the PGA increases. Similarly, it is observed that the BM increases under both dry and saturated states as the L/D ratio increases. Regarding the acceleration histories, the pile BM was reduced by reducing the acceleration intensity. Hence, the pile BM decreased to about 31% when the applied ground motion switched from Kobe (PGA=0.82 g) to Ali Algharbi (PGA=0.10 g). This study reveals that the soil conditions affect the relationship pattern between the FR and the PGA. Also, this research could be helpful in understanding the threat of earthquakes in different ground characteristics.

• 한국노년학
• /
• v.30 no.4
• /
• pp.1197-1211
• /
• 2010

This research was concucted to present a model of advance directives(AD) when a patient, who is in consciousness, shows a preference for an end of life care as an act of preparing for an uncertain situation that may arise in the forseeable future. The subjects of the research are 383 doctors/nurese and adults, who live in six cities and provinces, to investigate the status of AD, attitude regarding a meaningless life-prolonging treatment, and moreover, an understanding of and a preference for AD. The research was done by the well-structured questionnaire. Also, SPSS 14.0 is used to analyse the collected data, focused on frequency analysis, avearage and standard deviation, X2 test. As the results of the study, the most of the surveyed doctors/nurese knew DNR orders and AD and a few of them used DNR orders and AD practically. Also, the result shows that there is a negative conception of meaningless life-prolonging treatment among the responents, in addition, most of them agreed upon the idea of introducing AD to Korea, filling it out and making it legally effective. As a method of making AD out, the respondents wanted to use a form that mixed living will with an Power of Attorney in a document. Also, considering the appropriate time, respondents prefered when they are diagnosed with terminal illness. At the moment, the introductory model for AD, which is suitable for the Korean culture and current situation is presented based on the result of this research. In the future, other researches should deal with specific measures that can lead to a social consensus to adopt AD in Korea.

• Asia Marketing Journal
• /
• v.12 no.4
• /
• pp.183-201
• /
• 2011

In case of Aju capital, it adopted a strategy to use a single brand not two separate brands after M&A was completed. In order to implement this strategy, it has endeavored to effectively process the work of shifting existing marketing infrastructure of DAEWOO capital, the mergee, spending enough transition time for the brand migration. In the process of merging, Aju capital picked the strategy to use the brand of mergee first, which is the Daewoo Capital brand, and then took a transition time for a while to converge to the single brand of Aju capital. Putting another way, even if the M&A deal was completed back in 2005, it maximized the effect of launching its final brand "Aju capital" by capitalizing on the positive image of "Daewoo" during the transition time and changing its name just in the right moment. In a bid to implement this strategy successfully, it established a cautious but sophisticated brand migration strategy. 1) "Brand bridge" strategy through reinforcing brand power of "Naegeron", which is an individual product brand of Daewoo Capital 2) Establishing a good brand image through reinforcing customer satisfaction 3) It implemented and completed its brand transition initiative by going through the step of Aju Capital brand unification (from Sept 09 to present) Currently, the sales unit of Aju Capital is realizing quality growth through specialization. It's strategy is to construct a systematic sales portfolio in terms of both quality and quantity through product-by-product specialization where the existing practice was selling a variety of products in a single branch. Back in 2009, it opened a branch that specialize in imported cars and expanded its used car business to 6 specialized locations. Besides, the specialized locations for personal loan named "Naegeron" was expanded from 3 to 11 locations. Recently, it is expected that it will inject vigor to retail and corporate financing business alongside with its core business, which is auto financing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.209-216
• /
• 2024

Four accidents occurred between 2020 and 2022 after car ferries built according to a coastal passenger ship modernization plan collided with other ships or came into contact with the dock when entering Jeju Port. Accidents primarily occurred owing to careless ship handling and drift by wind during ship handled by herself using bow and stern thrusters without tugboats. Accordingly, in this study, we analyzed the collision accident focusing on car ferry H and the critical wind speed at which the ship cannot be controlled using its own power, tugboat operation plan in increasing wind speed were proposed based on the power required for the ship to berth parallel to the pier without a tugboat considering the external force and moment generated while the ship is berthing. A analysis of the critical wind speed of car ferry H by relative wind direction when using tugboats or not according to the loading status and the berthing speed, showed that one tugboat should be used at the stern when the lateral wind speed is over 10 m/s and two tugboats should be used when the lateral wind speed is over 14m/s berthing at Jeju port.

• Atmosphere
• /
• v.34 no.3
• /
• pp.305-317
• /
• 2024

The study examines the effects of parameters that define the characteristics of raindrops on the simulated precipitation during the summer season over Korea using the Weather Research and Forecasting (WRF) Double-Moment 6-class (WDM6) cloud microphysics scheme. Prescribed parameters, defining the characteristics of hydrometeors in the WDM6 scheme such as a_R, b_R, and f_R in the fall velocity (V_R) - diameter (D_R) relationship and shape parameter (𝜇_R) in the number concentration (N_R) - D_R relationship, presents different values compared to the observed data from Two-Dimensional Video Disdrometer (2DVD) at Boseong standard meteorological observatory during 2018~2019. Three experiments were designed for the heavy rainfall event on August 8, 2022 using WRF version 4.3. These include the control (CNTL) experiment with original parameters in the WDM6 scheme; the MUR experiment, adopting the 50th percentile observation value for 𝜇_R; and the MEDI experiment, which uses the same 𝜇_R as MUR, but also includes fitted values for a_R, b_R, and f_R from the 50th percentile of the observed V_R - D_R relationship. Both sensitivity experiments show improved precipitation simulation compared to the CNTL by reducing the bias and increasing the probability of detection and equitable threat scores. In these experiments, the raindrop mixing ratio increases and its number concentration decreases in the lower atmosphere. The microphysics budget analysis shows that the increase in the rain mixing ratio is due to enhanced source processes such as graupel melting, vapor condensation, and accretion between cloud water and rain. Our study also emphasizes that applying the solely observed 𝜇_R produces more positive impact in the precipitation simulation.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.381-386
• /
• 2015

The purpose of this study is to improve diagnostic efficiency of clinical study by setting up guidelines for more precise examination with a comparative analysis of signal intensity and image distortion depending on the location of X axial of object when performing magnetic resonance diffusion weighted imaging (MR DWI) examination. We arranged the self-produced phantom with a 45 mm of interval from the core of 44 regent bottles that have a 16 mm of external diameter and 55 mm of height, and were placed in 4 rows and 11 columns in an acrylic box. We also filled up water and margarine to portrait the fat. We used 3T Skyra and 18 Channel Body array coil. We also obtained the coronal image with the direction of RL (right to left) by using scan slice thinkness 3 mm, slice gap: 0mm, field of view (FOV): $450{\times}450mm^2$, repetition time (TR): 5000 ms, echo time (TE): 73/118 ms, Matrix: $126{\times}126$, slice number: 15, scan time: 9 min 45sec, number of excitations (NEX): 3, phase encoding as a diffusion-weighted imaging parameter. In order to scan, we set b-value to $0s/mm^2$, $400s/mm^2$, and $1,400s/mm^2$, and obtained T2 fat saturation image. Then we did a comparative analysis on the differences between image distortion and signal intensity depending on the location of X axial based on iso-center of patient's table. We used "Image J" as a comparative analysis programme, and used SPSS v18.0 as a statistic programme. There was not much difference between image distortion and signal intensity on fat and water from T2 fat saturation image. But, the average value depends on the location of X axial was statistically significant (p < 0.05). From DWI image, when b-value was 0 and 400, there was no significant difference up to $2^{nd}$ columns right to left from the core of patient's table, however, there was a decline in signal intensity and image distortion from the $3^{rd}$ columns and they started to decrease rapidly at the $4^{th}$ columns. When b-value was 1,400, there was not much difference between the $1^{st}$ row right to left from the core of patient's table, however, image distortion started to appear from the $2^{nd}$ columns with no change in signal intensity, the signal was getting decreased from the $3^{rd}$ columns, and both signal intensity and image distortion started to get decreased rapidly. At this moment, the reagent bottles from outside out of 11 reagent bottles were not verified from the image, and only 9 reagent bottles were verified. However, it was not possible to verify anything from the $5^{th}$ columns. But, the average value depends on the location of X axial was statistically significant. On T2 FS image, there was a significant decline in image distortion and signal intensity over 180mm from the core of patient's table. On diffusion-weighted image, there was a significant decline in image distortion and signal intensity over 90 mm, and they became unverifiable over 180 mm. Therefore, we should make an image that has a diagnostic value from examinations that are hard to locate patient's position.