• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.157-159
• /
• 1998

Sapphire crystals were grown by Horizontal Bridgman method. The effects of sliding rate (growth rate) of Molybdenum container, growth atmosphere, temperature gradient and orientation of see on crystal qualities were investigated. The size of the crystals grown was up to 150-200 mm in length, 90 mm in width and 25-35 mm in thickness. Crystals grown under the optimum conditions were colorless, transparent and could not be observed and macroscopic defects, such as bubbles, cracks, twins and mosaic structure. With the grown crystals, prototypes of sapphire substrate for blue wafers were characterized. As a result, we can get hight quality of sapphire wafers with c-axis, 1.5 inches in diameters and 0.33 mm in thickess.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1269-1274
• /
• 2012

A visible light responsive N, Mo co-doped $TiO_2$ were prepared by sol-gel method. X-ray diffraction, TEM, $N_2$ adsorption, UV-vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared $TiO_2$ samples. Doping restrained the phase transformation from anatase to rutile and reduced the particle sizes. The band gap was much narrowed after N, Mo co-doping. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive dyestuff, methylene blue, under visible light. The photocatalytic activities of doped $TiO_2$ were much higher than that of neat $TiO_2$. The photocatalytic stability of N, Mo co-doped $TiO_2$ was much better than that of N doped $TiO_2$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.3
• /
• pp.192-197
• /
• 2017

Hydrogenated Amorphous Silicon (a-Si:H) is used as an emitter layer in HIT (heterojunction with Intrinsic Thin layer) solar cells. Its low band gap and low optical properties (low transmittance and high absorption) cause parasitic absorption on the front side of a solar cell that significantly reduces the solar cell blue response. To overcome this, research on CSC (carrier Selective Contacts) is being actively carried out to reduce carrier recombination and improve carrier transportation as a means to approach the theoretical efficiency of silicon solar cells. Among CSC materials, molybdenum oxide ($MoO_x$) is most commonly used for the hole transport layer (HTL) of a solar cell due to its high work function and wide band gap. This paper analyzes the electrical and optical properties of $MoO_x$ thin films for use in the HTL of HIT solar cells. The optical properties of $MoO_x$ show better performance than a-Si:H and ${\mu}c-SiO_x:H$.

• Journal of Korean Society for Atmospheric Environment
• /
• v.32 no.4
• /
• pp.422-434
• /
• 2016

This study was conducted to understand roles of $NO_x(=NO+NO_2)$ on high $O_3$ episodes at an urban monitoring station in Seoul. Concentrations of NO, $NO_2$, $NO_y$ and $O_3$ were measured intensively at KIST monitoring station which located at urban center in Seoul metropolitan area during May 18~June 13, 2015. Sampling period was planed because high $O_3$ and PM occurred frequently during from late spring to early summer months in Seoul. The experimental site locates in NW from center of Seoul and is surrounded by residential area. Belt highway of the city runs from north to west side nearby experimental site. Vehicle exhaust emissions due to heavy traffic influenced $NO_x$ concentration at the site during northwesterly wind. Specific $NO_2$ concentration was measured by Blue Light photolytic converter, and it was compared to $NO_2$ concentration measured by molybedenum converter. $[NO_2]_{phtolysis}$ was usually lower than $[NO_2]_{molybedenum}$ during the experiment period; however their diurnal variations were very similar. The linear relationship between these $NO_2$ concentrations was found to be $[NO_2]_{phtolysis}$=0.64 $[NO_2]_{molybedenum}$ - 2.6, $r^2$=0.83 during May 16~8, 2015. The difference between $NO_2$ by molybdenum converter and by photolytic converter (${\Delta}NO_2=[NO_2]_{molybedenum}-[NO_2]_{phtolysis}$) accounted for residual $NO_y$ which can represent $NO_z$ (=$NO_y-NO_x$). $O_3$ concentration showed typical daily trend which has maximum at late afternoon and minimum during the night. $O_3$ increased at a rate of 7 ppb/hr since 8 am. and reached the maximum concentration (~80 ppb) at 3 pm.. The diurnal pattern of $O_3$ was inversely related with that of $NO_2$, suggesting that the formation of $O_3$ was the result of photochemical activity of $NO_2$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.2
• /
• pp.111-126
• /
• 1992

Silica sorption isotherm belonged to the C-type with weak L-type characteristics according to the classification system of adsorption isotherm. Silica sorption isothem fitted well to the Freundlich and Tempkin equation but not to the Langmuir equation. The color interference probably due to $Fe^{2+}$ during spectrometric silca determination by Molybdenum-blue method affected the sorption isotherm in reduced soils or low pH. Four parameters such as the intercept of Freundlich equation, the slope of Tempkin equation, the "Silica reactivity", and the "C-type slope", where the last two parameters were termed in the current study, were examined to assess treatment effects on silica sorption. Among them the "C-type slope" was found out to be the best parameter. The C-type isotherms showed the same high correlation coefficient as Freundlich and Tempkin equation when regressed to the sorption isothem. Plotting the C-type slope on a logarithmic scale vs. the pH showed high linearity. Using the "C-type slope" as a perameter, the pH and soil type affected the silica sorption while the effect of redox condtion was not significant. All Fe and Al extracted by the various reagents, and OM were highly correlated to silica sorption. Among them $Fe_d$ was identified as the highest influencing soil property. Since there is no equivalent reliable method to discriminate the forms of the soil Al-oxides their likely importance remains unclear.