• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.579-585
• /
• 1987

The effects of flux KCl and dopant Nb2O5 on the PTCR characteristics of BaTiO3 prepared by molten salt synthesis method have been investigated. As the amount of dopant Nb2O5 is over the solubility limit in BaTiO3, the room-temperature resistivity increases, and the PTCR effect and the grain size decrease. The variation of the amount of flux KCl slightly influences on the room-temperature resistivity, PTCR effect and grain size in Nb2O5 doped BaTiO3, but BaTiO3 ceramics prepared by the method of molten salt synthesis show larger PTCR effect than those of conventional calcining of mixed oxides.

• 한국전기전자재료학회논문지
• /
• 제11권5호
• /
• pp.378-383
• /
• 1998

Microstructure and additive effect of Lead Zirconate-Titanate(PZT) ceramics prepared by molten salt synthesis method with additives $Nb_2O_5, Fe_2O_3$ and MnO were investigated.The grain PZT ceramics ws decreased with the increase $Nb^{5+} or Fe^{3+}$ while increased with the increase $Mn^{2+}$ addition. The relative resistivity of PZT ceramics was increased with the increase $Mn^{5+}$ addition, while decreased with the increase $Mn^{2+}$ addition. And the dielectric and the piezoelectric constant of PZT ceramics showed 2,100 and 342pC/N at $Mn^{5+}$ addition of 0.75 mol%, respectively.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.481-487
• /
• 2009

본 연구에서는 기체(공기)-액체(용융탄산염) 이상 흐름계(용융염산화 공정)에서 공기유속(0.05~0.22 m/sec) 및 탄산용융염의 온도($870{\sim}970^{\circ}C$)가 흐름영역 전이특성에 미치는 영향을 공기 체류량의 drift-flux 및 차압요동의 추계학적 해석을 통하여 규명하였다. 흐름영역이 시작되는 공기 체류량값은 공기체류량-drift flux 그래프를 통하여 구하였다. 흐름영역 전이가 시작되는 공기 체류량 값은 탄산용융염의 온도가 증가함에 따라서 증가하였는데 이는 탄산용융염의 온도가 증가함에 따라서 액상의 점도와 표면장력의 감소로 인한 계의 안정화 때문이며 계의 특성에 가장 큰 영향을 미치는 기포특성(평균기포크기 및 상승속도)을 drift-flux 모델식을 적용하여 추정하였다. 흐름영역전이 특성을 좀 더 정량적으로 특성화하기 위하여 차압요동신호를 상공간투영 및 Kolmogorov entropy를 이용하여 해석하였다. Kolmogorov entropy는 탄산용융염의 온도가 증가함에 따라 감소하였으며 공기유속이 증가함에 따라서 증가하였으나 흐름영역에 따라서 다른 경향성을 나타내었고 흐름영역이 시작되는 공기유속값은 공기체류량의 drift-flux 해석으로 유도된 결과와 동일하였다.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.920-926
• /
• 2021

Capsules containing NaCl-MgCl₂ salt with 316L stainless steel or alloy N samples were irradiated in the Ohio State University Research Reactor for 21 nonconsecutive hours. A custom irradiation vessel was designed for this purpose, and details on its design and construction are given. Stainless steel samples that were irradiated during exposure had less corrosive attack than samples exposed to the same conditions without irradiation. Alloy N samples showed no significant effect of irradiation. This work shows a method for conducting in-reactor irradiation-corrosion experiments in static molten salts and presents preliminary data showing that neutron irradiation may decelerate corrosion of alloys in molten chloride salts.

• Korean Chemical Engineering Research
• /
• 제53권5호
• /
• pp.603-608
• /
• 2015

일반적으로 결정은 계면에 따라 그 성장속도가 다르기 때문에 계면의 성장을 제어함으로써 다양한 형태의 결정입자를 얻는 것이 가능하다. 알루미나의 경우 산업적 이용범위가 다양해지고 있어, 다양한 크기 또는 종횡비가 다른 다양한 형상의 분말이 요구되기도 한다. 용융염(molten-salt)을 이용하여 세라믹 입자를 성장시킬 경우, $800{\sim}900^{\circ}C$ 이상에서 용융되는 salt의 조건을 변화함으로써 세라믹 입자의 결정 성장 방향을 제어할 수 있는데, 알루미나의 경우 주로 판상형으로 입자가 성장하게 되며, 이때 salt의 ionic strength에 따라 판상형으로 성장하는 결정의 성장 속도를 제어하는 것이 가능하다. 본 연구에서는 NaCl, $Na_2SO_4$, $Na_3PO_4$를 이용하여 ionic strength가 다른 다양한 salt 조건에서 알루미나 입자를 성장시켰으며, 이들이 알루미나 결정 성장에 미치는 영향과 온도, 농도 변화에 따라 형성되는 알루미나의 크기 및 형상의 변화에 관하여 연구하였다.

• 방사성폐기물학회지
• /
• 제15권2호
• /
• pp.117-124
• /
• 2017

Densities of molten salt mixtures of eutectic LiCl-KCl with $UCl_3$, $CeCl_3$, or $LaCl_3$ at various concentrations (up to 13 wt%) were measured using a liquid surface displacement probe. Linear relationships between the mixture density and the concentration of the added salt were observed. For $LaCl_3$ and $CeCl_3$, the measured densities were significantly higher than those previously reported from Archimedes' method. In the case of $LiCl-KCl-UCl_3$, the data fit the ideal mixture density model very well. For the other salts, the measured densities exceeded the ideal model prediction by about 2%.

• 한국주조공학회지
• /
• 제17권4호
• /
• pp.402-410
• /
• 1997

Developing a salt core for squeeze casting process, two different salt cores(pure salt core and mixed salt core) were fabricated and investigated. Pure salt core was composed of 100% NaCl and mixed salt core was made by mixtures of NaCl with MgO(1%), $Na_2B_4O_7$(2%), and talc(1%) as a binder or a strengthening agent. Salt cores were compacted to various theoretical density, heat treated, and then squeeze-cast with molten Al alloy(AC8A). The compression strength of salt cores were measured and the squeeze-cast products were examined for shape retention, infiltration of molten metal into the cores, and microstructures. The shape of salt core compacted at above 75% of the theoretical density was maintained stably. The higher theoretical density of salt cores gave higher compression strength, and the compression strength of mixed salt core was higher than that of pure salt core. Namely at 90% theoretical density, the compression strength of mixed salt core was $6.3 kg/mm^2$, compared to $4.6 kgmm^2$ for pure salt core. At a squeeze casting pressure of $1000 kg/cm^2$, molten Al alloy was infiltrated into pure salt core of under 85% of the theoretical density. At squeeze casting pressure of $1000 kg/cm^2$, only mixed salt core above 90% of the theoretical density were valid, but the shape of the core was altered in the case of pure salt core at 90% of theoretical density. A key factor for developing a salt core for squeeze casting process was estimated as the ultimate compressive strength of salt core.

• 한국결정성장학회지
• /
• 제6권4호
• /
• pp.501-508
• /
• 1996

NaCl-KCl 용융염을 사용하여 strontium barium niobate 분말을 합성하였으며 반응온도, 시간 및 용융염의 첨가량 변화에 따른 반응과정 및 입자 형상 변화를 조사하였다. 반응 온도 및 반응 시간이 증가함에 따라 반응율은 증가하였으며, 분말의 형상은 덩어리 형태에서 침상형태로 변화하였다. 용융염의 첨가량 증가에 따라 반응율은 크게 증가하였으나, 분말의 형상은 침상형태에서 구상형태로 변화하였다. NaCl-KCl 용융염을 사용한 합성법에 의해 융제비가 1인 경우 $1000^{\circ}C$에서, 융제비가 4인 경우 $650^{\circ}C$에서 반응율 90 % 이상의 strontium barium niobate 분말 합성이 가능하였다.

• 한국세라믹학회지
• /
• 제42권10호
• /
• pp.672-677
• /
• 2005

In this study we prepared the Sr-ferrite powders and magnet by a molten salt method using the (NaCl+KCl) salt mixture. Starting materials of $Fe_{2}$$O_{3}$ and Sr$Co_{3}$ were mixed as the molar ratio of 5.70:1, and 0.08 mol$ \% $ $Al_{2}$$O_{3}$, 0.10 mo1$ \% $ Si$O_{2}$ and 0.12 mo1$ \% $ CaO were added as additives. Sr-ferrite powders synthesized at the reaction temperatures of 800$\∼$1200$ ^{\circ}C $ showed the typical M-type hexagonal ferrite phase, and hexagonal plate-like morphology with uniform distribution of 1$\∼$3 $\mu$m particle size. The bulk density of the sintered Sr-ferrite magnet prepared with powders by the molten salt method showed the maximum density of 4.82 g/$cm^{3}$ at the sintering temperature of 1200$^{\circ}C $. The maxima of remanent flux density (Br, 45 emu/g) and coercive force (iHc, 3.75 kOe) occurred at the sintering temperatures of 1150$ ^{\circ}C$ and 1200$^{\circ}C $.

• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.13-18
• /
• 1985

Semiconductive $Ba_{0.9}Sr_{0.1}TiO_3$ was prepared by both the Calcining of mixed Oxides (C. M. O) and the Molten Salt Synthesis(M.S.S) methods to investigate the PTCR effects. In the Molten Salt Synthesis method the temperature of calcination for Synthesis of $BaTiO_3$ could be lowered from 110$0^{\circ}C$ to 80$0^{\circ}C$. The M.S.S Specimens had smaller grain size and more homogeneous size distribution at the same sintering temperature as compared with the C. M. O specimens. The M. S. S. specimens showed greater PTCR effects and current variations in the time vs. current charac-teristics than those of C. M. O Specimens.