• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.518-520
• /
• 2007

Since all essential property of semiconductor materials are structure-sensitive, the understanding of the deformation mechanism and the deformed structure which can be formed in the nanometer-scale devices is very crucial. To investigate the deformation mechanism and the corresponding structures, nanometer-scale contact loading simulations are carried out using molecular dynamics in silicon and gallium-arsenide.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.834-836
• /
• 2008

We demonstrated micro-scale conducting polymer patterning based on a selective surface treatment. A substrate with a patterned photoresist was immersed into OTS (Octadecyltrichlosilnae) solution. The protected substrate areas were hydrophilic after removing the PR resist, where a conducting polymer solution was coated selectively by spin-coating method.

• BMB Reports
• /
• v.37 no.1
• /
• pp.11-27
• /
• 2004

The introduction of molecular markers in genetic analysis has revolutionized medicine. These molecular markers are genetic variations associated with a predisposition to common diseases and individual variations in drug responses. Identification and genotyping a vast number of genetic polymorphisms in large populations are increasingly important for disease gene identification, pharmacogenetics and population-based studies. Among variations being analyzed, single nucleotide polymorphisms seem to be most useful in large-scale genetic analysis. This review discusses approaches for genetic analysis, use of different markers, and emerging technologies for large-scale genetic analysis where millions of genotyping need to be performed.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.27-33
• /
• 2012

The purpose of this study is to evaluate the field applicability of Quantum Stick in scale deposit prevention for subway tunnels in Seoul. This technology was installed into drainpipes and its performance was monitored through occasional site visits. SEM and EDS were also performed on scale collected from these drain pipes. Results showed a decrease in scale deposits due to Quantum Stick treatment. In the field test, the device was found to be effective in preventing scale formation in new pipes as well as reducing existing scale in previously installed pipes. However, further investigations are necessary to account for various environmental conditions. In conclusion, the results indicate that molecular Vibration technology is effective in suppressing scale formation.

• The Korea Genome Conference
• /
• 2005.09a
• /
• pp.55-55
• /
• 2005

• Multiscale and Multiphysics Mechanics
• /
• v.1 no.4
• /
• pp.327-340
• /
• 2016

Poly(${\epsilon}$-caprolactone) (PCL) diol, with good biodegradation and biocompatibility, is one of the widely used soft segments (SSs) in composing bio-polyester-urethanes (Bio-PUs), which show great potential in both biomedical and tissue engineering applications. Properties of Bio-PUs are tunable by combining SS monomers with different molecular weights, structures, modifications, and ratio of components. Although numbers of research have reported many Bio-PUs properties, few studies have been done at the molecular scale. In this study, we use molecular dynamic (MD) simulation to construct atomistic models for two commonly used PCL diol SSs with different molecular weights 1247.58 Da and 1932.42 Da. We compare the simulation results by using two widely used classical force fields for organic molecules: Consistent Valence Force Field (CVFF) and CHARMM General Force Field (CGenFF), and discuss the validity and accuracy. Melt density, volume, polymer conformations, transition temperature, and mechanical properties of PCL diols are calculated and compared with experiments. Our results show that both force fields provide accurate predictions on the properties of PCL diol system at the molecular scale and could help the design of future Bio-PUs.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.133-137
• /
• 2015

The Galactic center uniquely provides opportunities to resolve how star clusters form in neutral gas overdensities engulfed in a large-scale accretion flow. We have performed sensitive Green Bank 100m Telescope (GBT), Karl G. Jansky Very Large Array (JVLA), and Submillimeter Array (SMA) mapping observations of molecular gas and thermal dust emission surrounding the Galaxy's supermassive black hole (SMBH) Sgr $A^{\ast}$. We resolved several molecular gas streams orbiting the center on ${\gtrsim}10$ pc scales. Some of these gas streams appear connected to the well-known 2-4 pc scale molecular circumnuclear disk (CND). The CND may be the tidally trapped inner part of the large-scale accretion flow, which incorporates inflow via exterior gas filaments/arms, and ultimately feeds gas toward Sgr $A^{\ast}$. Our high resolution GBT+JVLA $NH_3$ images and SMA+JCMT 0.86 mm dust continuum image consistently reveal abundant dense molecular clumps in this region. These gas clumps are characterized by ${\gtrsim}100$ times higher virial masses than the derived molecular gas masses based on 0.86 mm dust continuum emission. In addition, Class I $CH_3OH$ masers and some $H_2O$ masers are observed to be well associated with the dense clumps. We propose that the resolved gas clumps may be pressurized gas reservoirs for feeding the formation of 1-10 solar-mass stars. These sources may be the most promising candidates for ALMA to probe the process of high-mass star-formation in the Galactic center.

• Publications of The Korean Astronomical Society
• /
• v.20 no.1 s.24
• /
• pp.1-5
• /
• 2005

We report molecular line observations of CO(1-0), $^{13}CO(1-0)$, CS(2-1), and HCN(1-0) with SRAO 6m telescope toward L1014-IRS which is thought to be a very faint infrared source embedded in previously known 'starless' core L1014. The CO(1-0) observations find several components with different velocities along the line of sight of L1014, $4km\;s^{-1}$ and between $40{\sim}50km\;s^{-1}$. We find a parsec scale CO molecular outflow at the $4km\;s^{-1}$ component for the first time the direction of which is coincident with that of the small scale (${\sim}500pc$) outflow previously found. Although the observation is not covered for whole area of the outflow, the size of the molecular outflow seems not very inconsistent with the expected age of L1014-IRS. More accurate size and shape of the molecular outflow from L1014-IRS will be determined from the full coverage mapping in CO over the outflow region in very near future.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.502-505
• /
• 2007

PMMA has been extensively adopted in Nano Imprint Lithography(NIL). PMMA nano-structures experience severe mechanical load and deformation during NIL process, and understanding its mechanical behavior is very important in designing and optimizing NIL process. One of the most promising techniques for characterizing the mechanical behavior of nano structures is nano pillar compression test. In this study, the mechanical behaviors of PMMA pillars during compression test are analyzed using Molecular Dynamics. Two methods for simulation of PMMA nano pillars are proposed. The stress-strain relationship of nano-scale PMMA structure is obtained based on CVFF(Covalent Valence Force Fields) potential and the dependency of the applied strain rate on the stress-strain relationship is analyzed. The obtained stress-strain relationships can be useful in simulating nano-scale PMMA structures using Finite Element Method(FEM) and understanding the experimental results obtained by compression test of PMMA nano pillars.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.122-129
• /
• 1997

Machining technology has emerged to the point of performing atomic-scale fabrication. In tail paper atomic-scale machining characteristics are investigated by using Molecular Statics simulation method. The cutting model used in this work simulates machining with tools such as an AFM. It is shown that built-up edge formation and cutting forces depend on tool tip geometry. Also, the material flow during cutting is shown for various cutting conditions such as depth of cut, rake angle, and edge radius of tool.