• Economic and Environmental Geology
• /
• v.32 no.3
• /
• pp.307-315
• /
• 1999

Four organic polymers were mixed with mothmorillonite. Two cationic polymers a hi로 molecular weight polyacrylamide (494C) and a low molecular weight polymer (587C).Two anionic polymers include a high molecular weight polymer (aerotil). Each clay supension series were allowed to stand for 24 hours and were centrifuged, and the clay plugs were washed and dried. The dried samples investigated by XRD, IR and CEC measurement. The suspended clay containing anionic polymers was not flocculated at any concentratuons of polymer. But the suspendions containing two cationic polymers were rapidly flocculated at almost all concentrations. the d(001) spacings of Na-montmorillonite after being with cationic polymer 587C show about 15$\AA$ suggesting the polymers may have entered the interlayer spaces. The polymer 494C-treated sample produced double peaks of about 12 and 15$\AA$ in XRD. It indicates that the high molecular weight polymer. And cationic polymer 494C may be adsorbed mainy on the outside surface of clay, and some polymers may peretrate into olny interlayers in the margin of montmorillonite particles because of its high molecular weught. CEC of polumer 587-treated sample was reduecd mmarkedly suggesting polymer blocks CEC sites. The d(001) spacings of Ca-montmorillonite after being treated with cationic polymers show about 15$\AA$ suggesting that the interlayer spaces have not been expanded. In the experiment using a dilute Ca-bearing solution, the suspended caly containinf anionic polymers was flocculated. The results indicate that the flocculation behavior of montmorillonite-polymer supension depends on not only polymer properties such as concentration, electric charge and molecular weight but also compositions of solvent.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.66.2-66.2
• /
• 2018

The probability distribution function of column density (N-PDF) has been used for studying the characteristics of molecular clouds. In particular, the properties of N-PDF can reveal the nature of turbulence and gravity inside the molecular cloud. We use the dust continuum emission at $450{\mu}m$ and $850{\mu}m$ observed as part of the JCMT Gould Belt Survey (GBS) (Mairs et al. 2016), the 12CO J=1-0 line observed with the 45 m telescope at Nobeyama Radio Observatory (NRO) (Shimajiri et al. 2011), 13CO, C18O and HCO+ J=1-0 observed with the 13.7 m telescope at Taeduk Radio Astronomy Observatory (TRAO), as part of the TRAO key science project, "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale" (TIMES; PI: Jeong-Eun Lee). We here present the N-PDFs derived from the continuum and the molecular line emission toward the Orion A molecular cloud and compare their behaviors in order to investigate the chemical and optical depth effects on the N-PDF.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.205-210
• /
• 2005

There has been a growing interest in NF membrane for drinking water treatment, because it can remove simultaneously both hardness and hazardous micro pollutants such as pesticides and THM precursors. In this work, a hollow fiber NF membrane known as a composite membrane was employed for the rejection properties of both hydrophilic solutes and micro organic pollutants, where the former was used to evaluate the molecular sieving effect of this membrane and the latter was employed for the investigation of solute-membrane interaction as hydrophobic materials. This membrane effectively rejected the hydrophilic solutes and the permeation of them was mainly controlled by the molecular sieving effects such as molecular weight and molecular width. In the case of all micro organic pollutants, the rejections were varied from 42.2% for Simazine to 91.6% for Malathion, and the parameters related to the steric hindrance could significantly play an important role in the rejection. In the batch type adsorption experiments, all micro organic pollutants were entrapped mildly on the membrane in spite of lower degree compared with that of aromatic compounds, and they were correlated with log K.

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.264-269
• /
• 1993

Molecular structural properties of legume starches were investigated. In intrinsic viscosity and degree of Polymerization of amylose and amylopectins, cow pea and mung bean were high, but kidney bean was low. Low molecular weight fractions for kidney bean starch were much eluted by gel chromatography. In the elution profiles of their amylose by Sepharose 2B-CL, molecular weight of kidney bean amylose was smaller than that of other amylose Molecular weights of cow pea and mung bean amyloses were large, but that of kidney bean amylose was small and red bean amylose was medium. The elution profiles by Sephadex G-50 after debranching amylopectins with pullulanase showed similar patterns.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.402-407
• /
• 2014

Herein, we describe the effect of the cooling-off condition of a solution-processed 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-pentacene) film on its molecular distribution and the resultant electrical properties. Since the solvent in a TIPS-pentacene droplet gradually evaporates from the rim to the center exhibiting a radial form of solute, for a quenched case, domains of the TIPS-pentacene film are aboriginally spread showing original features of radial shape due to suppressed molecular rearrangement during the momentary cooling period. For the slowly cooled case, however, TIPS-pentacene molecules are randomly rearranged during the long cooling period. As a result, in the lopsided electrodes structure proposed in this work, the charge transport generates more effectively under the case for radial distribution induced by the quenching technique. It was found that the molecular redistribution during the cooling-period plays an important role on the magnitude of the mobility in a solution-processed organic transistor. This work provides at least a scientific basis between the molecular distribution and electrical properties in solution-processed organic devices.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.115-121
• /
• 2002

Synthesis of polymers with controlled thermosensitive properties was carried out by conventional radical copolymerization of N-isopropylacrylamide (NIPAAm) with N-vinylpyrrolidone (NVP) taken as a hydrophilic comonomer. Lower activity of NVP rather than NIPAAm was revealed by gravimetric and $^1$H NMR analysis. Thermosensitive properties of the copolymers were investigated. It was found that aqueous solutions of the copolymers undergo thermo-induced phase transition and become opaque, precipitate or gel with heating. After formation of the gels their significant contraction was observed at storage. Swelling degree and amount of expelled water were measured in dependence on the copolymer composition, temperature and ionic strength of environment medium and concentration of the solution. It was determined that in collapsed state gels exhibit quite high water content. According to physico-chemical properties of the copolymers observed they could be suitable for biomedical application as an injectable implant material.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.673-680
• /
• 2011

The compound 3-(2-Mercaptopyridine)phthalonitrile has been synthesized and characterized by IR, UV-vis, and X-ray single-crystal determination. The molecular geometry from X-ray determination of the title compound in the ground state has been compared using the Hartree-Fock (HF) and density functional theory (DFT) with the 6-31G(d) basis set. The calculated results show that the DFT and HF can well reproduce the structure of the title compound. The energetic behavior of the title compound in solvent media was examined using the B3LYP method with the 6-31G(d) basis set by applying the Onsager and polarizable continuum model. Using the TD-DFT and TD-HF methods, electronic absorption spectra of the title compound have been predicted and good agreement with the TD-DFT method and the experimental determination was found. The predicted nonlinear optical properties of the title compound are much greater than those of urea. Besides, molecular electrostatic potential of the title compound were investigated by theoretical calculations. The thermodynamic properties of the compound at different temperatures have been calculated and corresponding relations between the properties and temperature have also been obtained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.162-167
• /
• 2005

As the properties of porous materials during the drying process relate to the atomistic defects of heterogeneous materials such as dislocation, grain, grain boundary, pore, etc., the knowledge of nano-scale analysis is needed in order to accurately analyze the drying process for porous materials. In this study, the atomic behavior of porous materials Is statically predicted by using the molecular dynamics simulation and the nano-scale material properties are computed. The elastic modulus, thermal expansion coefficient, and volumetric heat capacity numerically found from the molecular dynamics simulation are compared with those of experiment and theory and proved the accuracy.

• Textile Coloration and Finishing
• /
• v.11 no.4
• /
• pp.1-7
• /
• 1999

Urethane-acrylate propelymers for secondary coating of optical fiber and high - performance material were prepared from the 4,4'-diphenylmethane diisocyanate(MDI), poly(tetramethylene oxide)glycol(PTMG, Mw 650 or 1000), 1,6-hexanediol(HD), 2-hydroxyethyl acrylate(HEA), and dibutyltin dilaurate as a catalyst. UV-Curable polyurethane acrylates were formulated from the urethane-acrylate prepolymers, three types of reactive diluents(DTs) having mono-, di-, and trifunctional-phenoxyethyl acrylate(PEA), hexanediol diacrylate(HDDA), and trimethylolpropane triacrylate(TMPTA), and 1-hydtoxycyclohexyl phenyl ketone(Irgacure 184) as a photoinitiator. The UV-cured films of polyurethane acrylates were obtained by curing using a medium-pressure mercury lamp(U W/cm, $\lambda_{max}=365\;nm)$. In this work, the effects of molecular weights of polyol and diol with low molecular weight into polymer chain on mechanical and dynamic mechanical properties of UV-cured polyurethane acrylates were studied. The structure and properties of the films obtained from the UV photopolymerization of urethane-acrylate prepolymer were investigated by FT-IR spectroscopy, dynamic mechanical measurement, tensile testing, and X-ray diffractometry.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.117.2-117.2
• /
• 2011

We probe 12CO J=2-1 and 13CO J=1-0 properties of a Virgo disk galaxy, NGC 4402 which is located near the cluster center. Our goal is to study the impact of intra cluster medium (ICM) on the molecular gas of a galaxy in the cluster environment. It has been believed that cluster galaxies are deficient in atomic hydrogen gas (HI gas) compared to their field counterparts and now there is much evidence that low density ISM can be easily removed by ram pressure caused by ICM wind. Meanwhile, no significant molecular gas deficiency of the cluster galaxy population has been found yet they show overall lower star formation rate than galaxies in the field, and it is still controversy whether dense ISM can be also stripped by the ICM wind or not. NGC 4402 with truncated HI disk($D_{HI}/D_{opt}$ ~ 0.75 and only 36%of HI gas compare to field galaxies of a similar size) and a disturbed gas morphology, appears to have strong ongoing ram pressure. Using high resolution 12 and 13CO data of NGC 4402 from a Sub Millimeter Array (SMA), we probe the molecular gas properties under strong ICM pressure. We discuss how its star formation activity and hence the global color of NGC4402 would be changed in the future.