• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1268-1270
• /
• 1994

Fine lithographic technology in a submicron design regime is necessary for the fabrication of VLSI circuits. In such lithography, fine pattern delineation is performed by electron beam, ion beam and X-ray lithography instead of photolithography. Therefore, the new resist materials and development method have been required. So, we are investigating another positive E-beam resists which have high sensitivity and dry etching resistance, Plasma co-polymerized resist was prepared using an interelectrode gas-flow-type reacter. Methymethacrylate, tetramethyltin and styrene were chosen as the monomer to be used. The delineated pattern in the resist was developed with gas-flow-type reactor using an argon and 02 as etching gas. We studied about the effects of discharge power and mixing rate of the co-polymerized thin :film. The molecular structure of thin film was investigated by ESCA and IR, and then was discussed in relation to its quality as a resist.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.10
• /
• pp.2877-2883
• /
• 2010

The folding kinetics of $WT^*$ ubiquitin variant with valine to alanine mutation at sequence position 26 (HubWA) was studied by stopped-flow fluorescence spectroscopy. While unfolding kinetics showed a single exponential phase, refolding reaction showed three exponential phases. The semi-logarithmic plot of urea concentration vs. rate constant for the first phase showed v-shape pattern while the second phase showed v-shape with roll-over effect at low urea concentration. The rate constant and the amplitude of the third phase were constant throughout the urea concentrations, suggesting that this phase represents parallel process due to the configurational isomerization. Interestingly, the first and second phases appeared to be coupled since the amplitude of the second phase increased at the expense of the amplitude of the first phase in increasing urea concentrations. This observation together with the roll-over effect in the second folding phase indicates the presence of intermediate state during the folding reaction of HubWA. Quantitative analysis of Hub-WA folding kinetics indicated that this intermediate state is on the folding pathway. Folding kinetics measurement of a mutant HubWA with hydrophobic core residue mutation, Val to Ala at residue position 17, suggested that the intermediate state has significant amount of native interactions, supporting the interpretation that the intermediate is on the folding pathway. It is considered that HubWA is a useful model protein to study the contribution of residues to protein folding process using folding kinetics measurements in conjunction with protein engineering.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.223-224
• /
• 2005

In this paper, multiple regression analysis of the electrical characteristics for $HfO_2$ thin films grown by metal organic molecular beam epitaxy (MOMBE) was investigated. The electrical properties, such as, the accumulation capacitance and the hysteresis index, are the main factors to determine the characteristics of $HfO_2$ thin films. The input factors on the process are the substrate temperature, Ar gas flow, and $O_2$ gas flow. For statistical analysis, the design of experiments was carried out and the effect plots were used to analyze the manufacturing process. This methodology can predict the electrical characteristics of the thin film growth mechanism related to the process conditions.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.1
• /
• pp.70.3-70.3
• /
• 2019

Understanding how the filamentary structure affects the formation of the prestellar cores and stars is a key issue to challenge. We use the Heterodyne Array Receiver Program (HARP) of the James Clerk Maxwell Telescope (JCMT) to obtain molecular line mapping data for two prestellar cores in different environment, L1544 in filamentary cloud and L694-2 in a small cloud isolated. Observing lines are $^{13}CO$ and $C^{18}O$ (3-2) line to find possible flow motions along the filament, $^{12}CO$ (3-2) to search for any radial accretion (or infalling motions) toward the cores of gas material from their surrounding regions, and $HCO^+$ (4-3) lines to find at which density and which region in the core gases start to be in gravitational collapse. In the 1st moment maps of $^{13}CO$ and $C^{18}O$, velocity gradient patterns implying the flow of material were found at the cores and its surrounding filamentary clouds. The infall asymmetry patterns of HCO+ and $^{13}CO$ line profiles were detected to be good enough to analyze the infalling motions toward the cores. We will report further analysis results on core formation in the filamentary cloud at this meeting.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.332-335
• /
• 1987

This paper is a continuation of our previous $paper,^1$ and deals with Eq.(1) (see the text), which was theoretically derived in the $paper,^1$$ [{\eta}]^f\; and\; [{\eta}]^0$ is the intrinsic viscosity at stress f and f = O, respectively. Equation (1) predicts how $[{{\eta}}]^f / [{\eta}]^0$ changes with stress f, relaxation time ${\beta}_2$ of flow unit 2 and a constant $c_2$ related with the elasticity of molecular spring of flow unit 2. In this paper, Eq.(1) is applied to a biopolymer, e.g., poly (${\gamma}$-benzyl L-glutamate), and nonbiopolymers, e.g., polyisobutylene, polystyrene, polydimethylsiloxane and cellulose triacetate. It was found that the $c_2$ factor is zero for non-biopolymers while $c_2{\neq}0$ for biopolymers as found $previously.^1$ Because of the non-Newtonian nature of the solutions, the ratio $[{{\eta}}]^f / [{\eta}]^0$ drops from its unity with increasing f. We found that the smaller the ${\beta}_2,$ the larger the $f_c$ at which the viscosity ratio drops from the unity, vice versa.

• Steel and Composite Structures
• /
• v.38 no.2
• /
• pp.189-211
• /
• 2021

An analytical solution is presented to analyze the thermoelastoplastic response of a rotating thick-walled cylindrical pressure vessel made of functionally graded material (FGM). The analysis is based on Tresca's yield condition, its associated flow rule and linear strain hardening material behaviour. The uncoupled theory of thermoelasticity is used, and the plane strain condition is assumed. The material properties except for Poisson's ratio, are assumed to vary nonlinearly in the radial direction. Elastic, partially plastic, fully plastic, and residual stress states are investigated. The heat conduction equation for the one-dimensional problem in cylindrical coordinates is used to obtain temperature distribution in the vessel. It is assumed that the inner surface is exposed to an airstream and that the outer surface is exposed to a uniform heat flux. Tresca's yield criterion and its associated flow rule are used to formulate six different plastic regions for a linearly hardening condition. All these stages are studied in detail. It is shown that the thermoelastoplastic stress response of a rotating FGM pressure vessel is affected significantly by the nonhomogeneity of the material and temperature gradient. The results are validated with those of other researchers for appropriate values of the system parameters and excellent agreement is observed.

• Journal of Veterinary Clinics
• /
• v.37 no.6
• /
• pp.350-354
• /
• 2020

Feline chronic lymphocytic leukemia (CLL) is a rare disease. Its diagnosis is not simple because of the absence of clinical signs and the presence of mature lymphocytosis. An 11-year-old female spayed Russian Blue cat was referred to the veterinary medical teaching hospital for lethargy, diarrhea, weight loss, and inappetence. Marked lymphocytic leukocytosis and a significantly increased number of small-to-intermediate-sized lymphocytes in the peripheral blood were found on hematological examination. The results of the feline leukemia virus and immunodeficiency virus test were negative. Further, mild splenomegaly was detected. Bone marrow aspirate analysis revealed mature lymphocytosis and a clonally rearranged T cell receptor gene with the polymerase chain reaction (PCR) for antigen receptor rearrangement assay. Flow cytometric immunophenotyping showed a homogeneous population of CD5+/CD21-T-cells in the peripheral blood and bone marrow. According to the results of the aforementioned examinations, CLL was diagnosed. Treatment was not initiated at the time of diagnosis because the clinical signs were mild and did not affect the quality of life. This report describes the clinical findings and use of advanced diagnostic tools such as molecular clonality analysis and immunophenotyping for the diagnosis of feline CLL.

• Journal of fish pathology
• /
• v.35 no.2
• /
• pp.241-246
• /
• 2022

White spot syndrome virus (WSSV) is a prevalent and virulent pathogen affecting cultured whiteleg shrimp (Litopenaeus vannamei) in Korea. In this study, seven monoclonal antibodies (mAbs) (10A12, 16C3, 17G4, 21G5, 22C4, 23B6 and 24G6) were produced by using purified WSSV. The reactivity of these mAbs was analysed by Western blot (WB), indirect immunofluorescence (IIF), and lateral flow immunochromatographic assay (LFIA). WB analysis demonstrated that three mAbs (17G4, 22C4, and 23B6) reacted specifically to VP28 with an approximate molecular weight of 24 kDa, mAb 16C3 reacted with approximately 17 kDa. IIF analysis demonstrated specific fluorescence signals on gill tissues of WSSV-infected shrimp, with five mAbs (10A12, 16C3, 22C4, 23B6, and 24G6), pleopods from WSSV-infected shrimp were used for LFIA, where, two mAbs (21G5 and 22C4) exhibited positive reaction. In conclusion, it can be inferred that the mAbs usage and specificity depends on the nature of assay used for diagnosis.

• The Korean Journal of Physiology and Pharmacology
• /
• v.26 no.5
• /
• pp.377-387
• /
• 2022

Benzimidazole anthelmintic agents have been recently repurposed to overcome cancers resistant to conventional therapies. To evaluate the anti-cancer effects of benzimidazole on resistant cells, various cell death pathways were investigated in 5-fluorouracil-resistant colorectal cancer cells. The viability of wild-type and 5-fluorouracil-resistant SNU-C5 colorectal cancer cells was assayed, followed by Western blotting. Flow cytometry assays for cell death and cell cycle was also performed to analyze the anti-cancer effects of benzimidazole. When compared with albendazole, fenbendazole showed higher susceptibility to 5-fluorouracil-resistant SNU-C5 cells and was used in subsequent experiments. Flow cytometry revealed that fenbendazole significantly induces apoptosis as well as cell cycle arrest at G2/M phase on both cells. When compared with wild-type SNU-C5 cells, 5-fluorouracil-resistant SNU-C5 cells showed reduced autophagy, increased ferroptosis and ferroptosis-augmented apoptosis, and less activation of caspase-8 and p53. These results suggest that fenbendazole may be a potential alternative treatment in 5-fluorouracil-resistant cancer cells, and the anticancer activity of fenbendazole does not require p53 in 5-fluorouracil-resistant SNU-C5 cells.

• Archives of Plastic Surgery
• /
• v.50 no.3
• /
• pp.311-314
• /
• 2023

In lower extremity reconstruction, the recipient vessel often requires long-range mechanical dilation because of extensive vasospasm or plaque formation induced by concomitant atherosclerosis. While a forceps dilator can be used to manipulate and dilate vessels approximately 1 cm from their end, a DeBakey vascular dilator can dilate long-range vessels. The authors successfully performed free flap reconstruction of the lower extremity using the DeBakey vascular dilator. Of the two patients who underwent lower extremity reconstruction, one had extensive vasospasm, and the other had plaques in the recipient arteries. Irrigation with 4% lidocaine and dilation of the lumen with a forceps dilator were insufficient to restore the normal arterial blood flow. Instead, a DeBakey vascular dilator with a 1-mm diameter tip was gently inserted into the lumen. Then, to overcome vessel resistance, the dilator gently advanced approximately 10 cm to dilate the recipient artery. Normal arterial blood flow was gushed out after dilating the vessel lumen using a DeBakey vascular dilator. The vascular anastomosis was performed, and intravenous heparin 5000 IU was administered immediately after anastomosis. Prophylactic low-molecular-weight-heparin (Clexane, 1 mg/kg) was administered subcutaneously to both patients for 14 days. The reconstructed flap survived without necrosis in either patient.