• KIEAE Journal
• /
• 제12권5호
• /
• pp.71-76
• /
• 2012

As reviewed of developments of Korean earth architecture, earth-made buildings have been dwindled gradually since "the new community movement" and earth have been recognized as materials which are not so good to human health and in result, earth-related techniques have been also forgotten. However, recently the earth architecture has been more attracting back many attentions thanks to the people who are interested in health and wellbeing and the earth related techniques or skills got keenly required. The present study has investigated and reproduced earth finishing materials which are based on natural materials as basic stuffs to use them as the finishing materials of the modern earth architecture. For the test, the finishing materials have been divided roughly into sorts of pastes and oils. In case of applying finishing materials onto earth surfaces, the moisture permeability test was conducted to measure a water-absorbing speed, and at the case of using finishing materials for interior works moisture adsorption/desorption test was performed to verify the indoor humidity regulation ability, and further a test to check whether to be stained when contacted with the finishing materials, was conducted. If there is not any stain it might be recognized to be high quality of moisture adsorption/desorption and so seaweed pastes or starches might be used for paste finishing materials and for natural oils, beans are desirable in practical ways. As low-quantity of moisture adsorption materials, linseed oil is most desirable and also beaned water over75% are thought to be useful.

• 한국의류학회지
• /
• 제19권1호
• /
• pp.36-50
• /
• 1995

The purpose of this study was 1) to estimate the improvement of thermal storage/release and moisture transport properties of PEG-treated acrylic athletic socks and suggest the optimum add-on for PEG treatment, 2) to investigate wear performance of untreated cocks and two kinds of socks treated with PEG of minimum and optimum add-on respectively, and 3) to consider the effect of thermal storage/release and moisture transport properties of PEG- treated socks on the wear performance and the subjective comfort zone. Thermal activities of specimens treated by PDC were evaluated on a DSC by measuring the heat of fusion on heating and the heat of crystallization on cooling. Moisture regain, absorption speed, wickability, water retenti on value, and water-vapor permeability were measured. In the wear trials that the subjects performed a subsequent exercise protocol wearing three differently treated socks in a conditioned environment ($14\pm2^{\circ}C$, 65$\pm$2% R.H.), microclimate temperature and humidity, and subjective wear sensations including thermal sensation, wettedness, softness, fit, and overall comfort were obtained. PEC-treated specimens with more than 20% add-on showed thermal storage on heating and thermal release on cooling by a DSC and the heat contents of treated ones were generally proportional to the add-ons. Moisture transport properties were highly improved after PEG treatment and increased rapidly with increasing add-on. The tendencies were, however, relaxed above 50% add-on and the treated knits were much stiffer above that add-on. In the wear trials of untreated, PEG add-on 20%, and 50% acrylic socks, the changes of microclimate temperature of 50% socks were significantly less than that of 20% socks. PEG add-on 50% socks showed significantly less changes of microclimate humidity than other two kinds of socks. Three kinds of socks showed significant differences in overall comfort and add-on 50% socks were accepted more comfortable than other two kinds of socks. Comfort zone of foot was extended after PEG treatment on socks and it implied that the subjects wearing PEG- treated socks felt comfortable in wider ranges of microclimate temperature and humidity.

• 한국농공학회논문집
• /
• 제62권4호
• /
• pp.53-61
• /
• 2020

The laboratory model test was conducted by dividing domestic reclaimed tideland into Sandy Loam (SL) and Silt Clay Loam (SiCL) to estimate soil moisture change and water supply according to soil characteristic when establishing irrigation plan for reclaimed tideland upland crop. In addition, the applicability of each scenario was verified using Van Genuchten model, which is the most widely used mathematical model for analyzing soil moisture characteristics of reclaimed tideland uplands crops. The required water supply according to the target soil moisture tension by reclaimed tideland is as follow. In the case of SL, soil depths of 0~10 cm, 10~20 cm were analyzed as 19 mm, 35 mm to reach the field capacity, and SiCL, 33 mm, 63 mm. The required water supply of SiCL was higher than that of SL. The study compared the simulation results from the scenarios of Van Genuchen model and the measured results from the laboratory model test based on according to the reclaimed tidelands. In the case of parameter, θ_s, θ_r, α, η were analyzed 0.55, 0.18, 0.064, 1.74 in SL and 0.46, 0.22, 0.105, 1.92 in SiCL. In terms of soil characteristics, SL with better water permeability was found to have higher applicability than SiCL. By Soil depth, applicability was found in 0~10 cm directly affected by water supply.

• 한국지반신소재학회논문집
• /
• 제19권1호
• /
• pp.25-33
• /
• 2020

본 연구에서는 기존 차수재가 수분과의 팽윤성을 갖는 특징을 개선하기 위해 모래, 칼슘-벤토나이트 및 겔화제 혼합물의 트리클로로에틸렌(TCE) 반응에 따른 투수 특성을 평가하였다. 이를 위해 연구 재료의 기본적인 특성 분석, 투수시험을 진행하였다. 투수계수는 칼슘-벤토나이트 혼합 비율이 증가함에 따라 감소하였으며, 겔화제 혼합 비율이 증가함에 따라 증가하였다. 결론적으로, 칼슘-벤토나이트 15%, 겔화제 30% 이상 혼합 시 지하수 유동에서의 투수계수는 α × 10^-4 cm/sec 이상으로 분석되어 지하수 유동을 차단하지 않는 것으로 분석되었다. 또한 TCE 반응 시 혼합차수물의 투수계수는 α × 10^-7 cm/sec 이하로 분석되어, 차단층 투수계수 조건(1.0 × 10^-6 cm/sec 미만)을 만족하였다. 따라서 칼슘-벤토나이트와 겔화제는 TCE로 오염된 토양 및 지하수에 선택적 투수능 변환 특성을 보이는 차수재로서 활용이 가능하다.

• 한국식품저장유통학회지
• /
• 제13권3호
• /
• pp.285-291
• /
• 2006

가소제로서 솔비톨 혼합물의 첨가가 분리대두단백 필름의 수분흡습특성, 수분투과도, 색, 인장강도 및 신장률, 그리고 용해 특성에 미치는 영향을 조사하였다. 솔비톨 혼합물은 액상형과 결정형의 상태로 다양한 비율로 혼합하여 첨가하였고, 가소제로 글리세린을 첨가한 대조구 필름의 물리적 특성과 비교하였다. 솔비톨이 첨가된 필름은 대조구 필름에 비해 높은 인장강도를 갖는 반면 낮은 수분투과도 및 신장률을 보였다. 한편 솔비톨 첨가 형태에 따른 영향은 필름 신장률에는 유의적 차이는 보였으나 기타 수분투과도, 색, 인장강도 등의 필름특성에는 커다란 차이는 보이지 않았다. 솔비톨 첨가된 필름은 높은 수분차단 효과 및 필름강도를 갖는 대신 높은 용해성을 보여, 상업적 활용성을 증진시키기 위해서는 이를 극복하는 연구가 필요할 것으로 사료된다.

• 한국생활과학회지
• /
• 제8권1호
• /
• pp.151-163
• /
• 1999

The purpose of this study was to investigate the thermal resistance and the liquid/vapor water transfer characteristics of four waterproof and water vapor permeable coated fabrics with the ground fabric called nylon taffeta. In order to establish the experimental environment, outdoor temperature and humidity in Taegu during the last three years were examined and the experiment was performed at (1) $15^{\circ}C$, 50% R.H., (2) $20^{\circ}C$, 60% R.H., (3) $25^{\circ}C$, 65% R.H., which were the average standards in spring and fall. The test results were as follows ; 1. Among physical parameters, the thinner the thickness was, the higher the water vapor permeability was. But the porosity in thickness was not proportional to water vapor permeability linearly. 2. The thicker the thickness of specimens was and the smaller the bulk density and porosity were, the higher the thermal resistance. And the results also shown that the larger the temperature difference between the environmental temperature and the hot plate was, the more the difference of CLO values was apparent. 3. Since the contact angle of all specimens are above $90^{\circ}$, the all specimens have a good performance in waterproof. The more the specimens surface were rough, the higher the thermal resistance was. 4. According to the result of performing moisture transfer test using the simulating body skin-clothing-environment system, the humidity sensor placed in between the fabric and the environment detected the full saturation in 10 minutes after the experiment had began at $15^{\circ}C$, 50% R.H. and in 15 minutes after the experiment both at $20^{\circ}C$, 60% R.H. and at $25^{\circ}C$, 65% R.H. 5. ${\Delta}$ values of the humidity sensors placed in between the human body and the fabric and in between the fabric and the environment fluctuated repeatedly within the range of $20{\sim}40%$ at $20^{\circ}C$, 60% R.H., and $15{\sim}30%$ at $25^{\circ}C$, 65% R.H.

• 한국지반신소재학회논문집
• /
• 제7권3호
• /
• pp.17-24
• /
• 2008

본 연구는 화강토에 벤토나이트와 석분을 혼합하여 차수구조물을 조성할 때 구조물의 기능 및 안정을 확보할 수 있는 혼합토를 개발하고자 일련의 시험을 통하여 혼합비에 따른 혼합토의 다짐특성, 투수특성, CBR 및 압축강도특성을 밝혀 혼합토가 차수 재료로서 활용가능성을 검토하였다. 석분 함유량이 증가하면 최대건조밀도는 감소하고 최적함수비는 미소하게 증가하는 경향을 보이며 일축압축강도와 CBR값은 감소하고 점착력, 내부마찰각 그리고 팽창비는 증가하였다. 또한 벤토나이트 함유량이 증가하면 최대건조밀도는 감소하고 최적함수비, 일축압축강도, 점착력, 내부마찰각, CBR값과 팽창비 등은 증가하였다. 그리고 차수재로서의 투수계수 규정을 충족하는 혼합토의 혼합비는 벤토나이트를 10%이상 함유하고 석분함유율이 10% 이내 임을 알 수 있었다.

• 한국의류학회지
• /
• 제25권2호
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.

• 한국식품과학회지
• /
• 제44권2호
• /
• pp.162-167
• /
• 2012

톳으로부터 HPH를 이용해 식품에 적용 가능성이 있는 가식성 필름을 제작할 수 있었다. HPH 처리 압력의 증가는 필름의 강도와 깨짐성을 증가시켰고, 단면이 조밀하고 균일한 필름을 형성시켰다. HPH의 처리 횟수의 증가 또한 필름의 단면을 조밀하게 하였다. 개발된 톳 필름은 보고된 많은 다른 생고분자 필름들에 비해 상대적으로 강도, 깨짐성, 그리고 수분 저항력이 낮아 코팅 또는 롤을 비롯한 필름 형태로 건조 식품 또는 중간 수분 식품에 적용될 수 있는 가능성을 보여주었다.

• 폴리머
• /
• 제32권1호
• /
• pp.38-42
• /
• 2008

메탄, 아세틸렌, hexamethyldisiloxane(HMDSO) 및 HMDSO+산소를 플라스마 중합시켜 식품포장용으로 사용되고 있는 저밀도 폴리에틸렌(LDPE) 필름의 표면에 얇은 박막을 코팅하여 LDPE 필름의 차단성을 향상시키고자 하였다. 산소에 대한 차단성은 HMDSO+산소(유량 : 0.6+9.0 SCCM) 플라스마로 40 W에서 10분간 코팅할 경우 가장 크게 향상되어 산소 투과도가 18.6배까지 감소되었으며, 이산화탄소와 수분에 대한 차단성은 아세틸렌(유량 : 0.75 SCCM) 플라스마로 10 W에서 10분간 코팅할 경우 가장 크게 향상되어 이산화탄소와 수분 투과도가 각각 12.0배와 3.0배까지 감소되었다. 또한, 이렇게 코팅된 필름을 사용하여 방울토마토, 오이, 팽이버섯 등을 포장할 경우, 신선도 유지기간이 코팅 전에 비하여 $1.5{\sim}3.0$배까지 연장되었다.