• 제목/요약/키워드: Moisture-free condition

검색결과 59건 처리시간 0.023초

자유공간 전송방법을 이용한 마이크로파 유전특성연구 (Determination of Microwave Dielectric Properties of Grain by Free Space Transmission Method)

  • 김종헌;김기복;노상하
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 춘계학술대회 논문집
    • /
    • pp.233-235
    • /
    • 1997
  • A free sparse transmission method using X-band standard gain horn antenna is applied to measure the attenuation and phase shift of microwave signal through the wetted grain such as rough rice, brown rice and barley. The moisture content of grain varied from 11 to 25% based on its wetted condition. The dielectric constant and loss factor, which depend on the moisture content of the wetted grain are obtained from the measured attenuation and phase shift by vector network analyzer. The measured values of dielectric constants as a function of moisture density are compared with values of those obtained using the predicted model for estimating dielectric constants of grain.

  • PDF

New Density-Independent Model for Measurement of Grain Moisture Content using Microwave Techniques

  • Kim, Jong-Heon;Kim, Ki-Bok;Noh, Sang-Ha
    • Journal of Electrical Engineering and information Science
    • /
    • 제2권4호
    • /
    • pp.72-78
    • /
    • 1997
  • A free space transmission method using standard gain horn antennas in the frequency range from 9.0 to 10.5GHz is applied to determine the dielectric properties of grain such as rough rice ,brown rice and barley. The dielectric constant and loss factor, which depend on the moisture content of the wetted grain are obtained from the measured attenuation and phase shift by vector network analyzer. The moisture content of grain varied from 11 to 25% based on this wetted condition. The measured values of dielectric constants as a function of moisture density are compared with values of those obtained using he predicted model for estimating dielectric constants of grain. The effect of density fluctuation, high is an important parameter governing the dielectric properties of grain, on the dielectric constant and loss factor is presented. A new density-independent model in terms of measured attenuation an moisture density is proposed of reducing the effects of density fluctuation on the moisture content measurement.

  • PDF

증자 난황 건조 조건이 오리 난황유 산가 변화에 미치는 영향 (Effect of Drying Conditions of Steamed Egg Yolk on Acid Value of Duck Egg Yolk Oil)

  • 류일환;정인택;이갑상
    • 한국식품영양학회지
    • /
    • 제17권2호
    • /
    • pp.206-211
    • /
    • 2004
  • 오리 난황유는 난황을 성형 증자하여 만든 증자난황을 일정 조건 하에서 건조 후 용제 추출하여 제조하게 된다. 이때 증자 난황의 건조가 유제품의 품질에 집적적인 영향을 미치게 된다. 따라서 청둥 오리알로부터 직접분리 조제한 난황으로부터 난황유 추출 및 저장과정 중에 일어나는 유지의 품질 변화를 방지하기 위하여 오리난황유의 추출 이전 단계인 증자 난황의 건조 방법 및 수분함량, 온도, 건조 시간에 따른 산가 및 수분 함량의 변화를 조사한 결과, 열풍건조 분무건조 및 동결건조에 따른 산가는 각각 3.7, 3.5 및 3.5였으며, 수분의 함량은 각각 4.0%, 3.0%, 3.0%이었고, 유리지방산의 함량은 각각 0.83%, 0.80% 및 0.79%로 동결건조 및 분무 건조에 의한 건조 시 비교적 낮은 산가 및 수분함량을 보였으나 각 건조 방법 간의 유의한 차이는 보이지 않았다. 건조 온도의 영향은 6$0^{\circ}C$에서 수분의 함량은 최저치에 도달하여 일정한 값을 보인 반면, 산가 및 유리 지방산의 함량은 추출온도가 60%이상에서 급격히 증가하는 결과를 보였다. 건조시간에 따른 산가 및 수분함량과 유리 지방산의 함량 모두 건조 9시간 후 각각 3.1, 3.0% 및 0.98%로 최저값에 도달하여 건조 12시간까지 변화를 보이지 않았다. 또한 산가에 따른 난황유 지방산 조성의 변화는 $C_{18:0}$(stearic acid)의 함량은 산가가 1.5 증가함에 따라 4.76%에서 7.11%로 약 1.5배 가량 증가한 반면 불포화 지방산의 함량은 급격히 감소함을 보였다. 불포화 지방산 중 함량이 많은 지방산의 감소폭이 커짐을 보였다. 불포화 지방산 중 linolenic acid( $C_{18:3}$)의 경우 1.29%에서 0.96%로 약 3배 가량 감소되었으며, Arachidonic acid($_{20:4}$)의 경우 0.63%에서 0.40%로 약 1.5배 가량 감소되었다. 이상의 실험결과로부터 최적의 증자난황 건조조건으로 열풍건조법으로 6$0^{\circ}C$, 9시간 건조시 수분함량과 산가 및 유리지방산이 함량이 낮은 양호한 품질의 난황유를 얻을 수 있는 것으로 판단되었다.판단되었다.

폴리에틸렌 필름에서의 수용성 미끄럼 방지 접착제의 내습 특성 개선 (Improvement of Moisture Resistance of Aqueous Slip-Resistant Adhesive on the Polyethylene Film)

  • 윤영기;조국영;설완호
    • Korean Chemical Engineering Research
    • /
    • 제48권2호
    • /
    • pp.193-197
    • /
    • 2010
  • 현재 포장 공정에서 사용되고 있는 stretch wrapping 공정은 초기 포장기의 장치 구비 등의 가격문제와 사용 후 폐기되는 포장재의 처리문제가 심각하다. 이에 대해 미끄럼 방지 접착제(Slip-resistant adhesive)를 사용하여 물류를 고정하여 운반하는 방식은 간단한 접착제의 도입으로 폐기물 발생이 없고 공정이 간단하며 비용이 매우 낮은 장점을 지닌다. 본 연구에서는 다습한 환경에서 polyethylene 필름 상에 미끄럼 방지 접착제를 적용했을 경우 접착력이 저하되는 것을 peel test를 통해 확인하고 적절한 첨가제의 선정 및 도입을 통해 접착력을 개선하는 연구를 수행하였다. 이를 통해서 maltodextrin의 첨가 시에 내습성에 대한 개선으로 인해 미끄럼 방지 접착력의 저하가 억제되었으며 10 wt% 도입 시에 최적의 성능을 나타내었다.

Evaluation of Optimum Moisture Content for Composting of Beef Manure and Bedding Material Mixtures Using Oxygen Uptake Measurement

  • Kim, Eunjong;Lee, Dong-Hyun;Won, Seunggun;Ahn, Heekwon
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권5호
    • /
    • pp.753-758
    • /
    • 2016
  • Moisture content influences physiological characteristics of microbes and physical structure of solid matrices during composting of animal manure. If moisture content is maintained at a proper level, aerobic microorganisms show more active oxygen consumption during composting due to increased microbial activity. In this study, optimum moisture levels for composting of two bedding materials (sawdust, rice hull) and two different mixtures of bedding and beef manure (BS, Beef cattle manure+sawdust; BR, Beef cattle manure+rice hull) were determined based on oxygen uptake rate measured by a pressure sensor method. A broad range of oxygen uptake rates (0.3 to 33.3 mg $O_2/g$ VS d) were monitored as a function of moisture level and composting feedstock type. The maximum oxygen consumption of each material was observed near the saturated condition, which ranged from 75% to 98% of water holding capacity. The optimum moisture content of BS and BR were 70% and 57% on a wet basis, respectively. Although BS's optimum moisture content was near saturated state, its free air space kept a favorable level (above 30%) for aerobic composting due to the sawdust's coarse particle size and bulking effect.

나노크기 실리카를 사용한 반도체용 액상 에폭시 수지 성형재료의 흡습성질 (Moisture Absorption Properties of Liquid Type Epoxy Encapsulant with Nano-size Silica for Semiconductor Packaging Materials)

  • 김환건
    • 반도체디스플레이기술학회지
    • /
    • 제9권2호
    • /
    • pp.33-39
    • /
    • 2010
  • The moisture absorption properties such as diffusion coefficient and moisture content ratio of liquid type epoxy resin systems with the filler were investigated. Bisphenol A type and Bisphenol F type epoxy resin, Kayahard MCD as hardener and 2-methylimidazole as catalyst were used in these epoxy resin systems. The nano-sized spherical type fused silica as filler were used in order to study the moisture absorption properties of these liquid type epoxy encapsulant according to the change of filler size. The temperature of glass transition (Tg) of these epoxy resin systems was measured using Dynamic Scanning Calorimeter (DSC), and the moisture absorption properties of these epoxy resin systems according to the change of time were observed at $85^{\circ}C$ and 85% relative humidity condition using a thermo-hygrostat. The diffusion coefficients in these systems were calculated in terms of modified Crank equation based on Ficks' law. An increase of Tg and diffusion coefficient with filler size in these systems can be observed, which are attributed to the increase of free volume with Tg. The change of maximum moisture absorption ratio according to the filler size and filler content cannot be observed; however, the diffusion coefficients of these systems decreased with filler content. The diffusion via free volume is dominant in the epoxy resin systems with low nano-sized filler content; however, the diffusion with the interaction of absorption according the increase of the filler surface area is dominant in the liquid type epoxy encapsulant with high nano-sized filler content.

Effect of external compressive load during a continuous radio-frequency /vacuum process on movement behavior

  • Lee, Nam-Ho;Jin, Young-Moon
    • 한국가구학회지
    • /
    • 제17권1호
    • /
    • pp.1-10
    • /
    • 2006
  • Movement behavior, shrinkage and equilibrium moisture content (EMC), in this experiment reflected a change of hygroscopicity mainly affected by continuously compressive load during radio-frequency/vacuum (RF/V) drying and humidity changes during equilibrating. As a result of interaction of the compressive load and moisture content changing under the RF/V condition, the shrinkages in loading direction were significantly increased while those perpendicular to loading direction were decreased. The shrinkages were affected most in tangential, and least in longitudinal direction. The shrinkages showed higher values in continuous drying than in intermittent drying. In the direction of increased shrinkage, all the movements were also increased, for example, the tangential movement for the loaded-RS and the radial movement for loaded-TS; in the direction of decreased shrinkage, all the movements except the tangential movement for the loaded-TS were decreased such as the tangential and radial movements for the loaded-ES, and the radial movement for the loaded-RS, comparing with those of the load-free. EMCs of the loaded specimens were all higher than that of the load-free specimen, and the highest for the loaded-TS, the lowest for the loaded-ES. The transverse hygroscopicity of specimen was reduced for the loaded-ES, but increased for the loaded-TS.

  • PDF

식용감자 품종의 저장기간별 영양성분 변화 (The Changes of Nutrient Composition in the Edible Potato Varieties during Storage)

  • 윤종탁;권혜정;홍거표;안문섭;허남기;임학태;김광호
    • 원예과학기술지
    • /
    • 제17권4호
    • /
    • pp.467-469
    • /
    • 1999
  • 국내에서 식용으로 이용되며 수확직후 또는 저온 저장후 출하되는 '수미', '대서', '남작' 그리고 '대지' 품종을 $4{\sim}5^{\circ}C$의 저온 저장고에 1월부터 5월까지 저장하면서 수분, 유리당, 전분 그리고 비타민 C의 저장시기별 영양 성분 변화를 측정하였다. 저장기간이 경과함에 따라서 감소하는 성분으로는 전분, 비타민 C이었는데 특히 비타민 C는 1월에 품종 평균 16mg/100g 이었고 저장 후기인 5월에 7mg/100g을 나타내 저장에 따른 손실이 컸다. 유리당 함량은 2월과 3월에 2.0~2.1%로 증가하였다가 이후 감소하여 5월에는 1%를 나타내었고, 수분은 저장기간 동안 증감을 계속하며 80.4~81.3%를 유지하였다. 저장기간 전반에 걸친 품종별 영양성분 함량을 보면, '수미'는 비타민 C, 유리당, 수분 함량이 가장 높았고, '대서'는 전분함량이 가장 높았다.

  • PDF

MDF 시멘트 복합재료의 휨강도와 수분민강성에 미치는 수용성 폴리머의 영향 (The Effect of Water Soluble Polymer on the Flexural Strength and Moisture Sensitivity in MDF Cement Composites)

  • 김태현;최상흘
    • 한국세라믹학회지
    • /
    • 제29권4호
    • /
    • pp.298-304
    • /
    • 1992
  • Flexural strength, microstructure, hydration reaction and moisture sensitivity in macro defect-free (MDF) cement, which basically prepared of high alumina cement (HAC) and hydroxypropyl methylcellulose (HPMC) and polyvinylalcohol (PVA) as water soluble polymer were investigated. Cement composites based on HAC-PVA system were improved in flexural strength than that of HAC-HPMC system especially, the strength of specimens added to 10 wt% of polyvinylalcohol was 160 MPa. These improvements of flexural strength were attributed to not only the effect of water soluble polymer in elimination of macropores (above 100 $\mu\textrm{m}$) and cement grain bridging, but the effect of unhydrate cement as an aggregate. Moisture sensitivity and flexural strength in wet condition of MDF cement composites immersed in water at 80$^{\circ}C$ for 3 days were decreased.

  • PDF