• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.125-132
• /
• 1983

Dielectric properties of sardine-starch paste with moisture content of 4 to $13\%$ were investigated as functions of moisture and frequency. And the effects of the levels of fat and starch of the mixtures upon dielectric permittivity, critical moisture, were also mentioned. In addition, a theoretical prediction of frequency dependence of dielectric constant which was computed by the lumped circuit of two layer condenser model was evaluated. For the preparation of sardine-starch paste, comminuted sardine meat was washed thoroughly several times in chilled water by soaking and decanting, and finally centrifuged. This procedure was extended longer to provide a low fat sample. The centrifuged meat was mixed with adequate amounts of starch and salt, and ground for 25 minutes in a stone mortar, moulded in the form of disk with 7cm diameter and 1.2cm thickness and then freeze dried. Dried meat disks were cut off for the size of 5.5cm diameter and 1.0cm thickness and their moisture contents were controlled in humidified desiccators with saturated solutions. Dielectric constants of sardine-starch paste tended to decrease frequency was increased showing a critical charge at the moisture called critical moisture content. In case of the sample with $20\%$ starch and $2\%$ salt an average complex permittivity($\epsilon^{\ast}$) at 7 to $8\%$ morsture as the critical moisture content was presented; $\epsilon^{\ast}$=3.37+j 0.39 at 0.1 MHz, $\epsilon^{\ast}$=2.54+j 0.19 at 15 MHz, and $\epsilon^{\ast}$=2.15+j 0.08 at 1.8 GHz, respectively. The theoretically obtained complex permittivity values from the two layer condoner model were in close agreement with these actual measurements under the same conditions, that appeared as $\epsilon^{\ast}$=2.53+i 0.09 at 0.1 MHz and $\epsilon^{\ast}$=2.28+j 0.06 at 15 MHz, respectively. The fast level of the mixture also revealed an influence on dielectric property that defatted neat with $1.0\%$ fat showed a higher hc and $\epsilon^{\ast}$ value than the meat with $4.8\%$ fat. Complex permittivity being related to the moisture level remained nearly unchanged or slightly changed at the moisture range of 4 to $8\%$ but was dispersed widely at higher moisture contents.

• Korean Journal of Food Science and Technology
• /
• v.31 no.1
• /
• pp.164-170
• /
• 1999

Cracking of rice caused by moisture migration during storage under different relative humidity conditions was investigated for the establishment of safe storage condition of rice. Rice was cracked when a large difference in equilibrium relative humidity $({\Delta}ERH)$ between the rice and the environment was present. External and internal cracks were generated as the results of moisture desorption and adsorption, respectively. The external cracks by moisture desorption generated in all directions and shaped irregularly, while the internal cracks by moisture adsorption did in radial direction and showed a typical shape. The cracking trend could be analyzed by the Weibull function, and the cracking constant increased with ${\Delta}ERH$. The frequency of cracked rice increased linearly with In $({\Delta}ERH)$. The critical crack-inducing ${\Delta}ERH$ was $11.3{\sim}16.4%$ during desorption and $10.8{\sim}17.1%$ during adsorption. A diagram for the safe storage of rice was developed with respect to the initial moisture content and the water activity of rice.

• Composites Research
• /
• v.30 no.6
• /
• pp.422-428
• /
• 2017

The moisture absorption behavior, tensile properties, and thermal analysis properties of MWCNT embedded nanocomposites exposed to temperature and moisture were evaluated. The contents of MWCNT were 0 wt%, 1 wt%, and 2 wt%, respectively. The specimens were exposed to immersed conditions at $25^{\circ}C$ and $75^{\circ}C$ for up to 600 hours. According to the results, the apparent moisture content increased as the exposure time increased, but the difference between the maximum moisture content and the moisture content at 600 hours was almost constant. The tensile modulus decreased with increasing exposure time and the degree of decrease was increased significantly as the MWCNT content and exposure temperature increased. The tensile strength decreased with longer exposure time without MWCNT, but increased with MWCNT due to the reinforcing effect of MWCNT. The storage modulus, glass transition temperature, tan d peak magnitude were low as the exposure time increased, but tan d curves with two peaks appeared when exposed to high exposure temperature for more than 300 hours.

• Journal of Biosystems Engineering
• /
• v.17 no.1
• /
• pp.79-90
• /
• 1992

Viscoelastic characteristics of agricultural products may be determined through three basic tests ; stress relaxation, creep, and dynamic test. Considering the changeability of living materials, dynamic test in which information is derived in a relatively short time appears to be highly desirable, in which either cyclic stress or cyclic strain is imposed and the remaining quantity (strain or stress) is measured. The periodically varying stress will also result in periodically varying strain which in a viscoelastic material should theoretically be out of phase with the stress, because part of the energy subjected to sample is stored in the material as potential energy and part is dissipated as heat. This behavior results in a complex frequency-dependent compliance denoted by J($i{\omega}$). The complex compliance and therefore the storage compliance, the loss compliance, the phase angle, and percent energy loss for the sample should be obtainable with a given static viscoelastic property of the material under static load. The complex compliance of the rough rice kernel were computed from the Burger's model describing creep behavior of the material which were obtained in the previous study. Also, the effects of cyclic load and moisture content of grain on the dynamic viscoelastic behavior of the samples were analyized. The results obtained from this study were summarized as follows ; 1. The storage compliance of the rough rice kernel slightly decreased with the frequency applied but at above the frequency of 0.1 Hz it was nearly constant with the frequency, and the loss compliance of the sample very rapidly decreased with increase in the frequency on those frequency ranges. 2. It was shown that the storage compliance and the loss compliance of the sample increased with increase in grain moisture content. Effect of grain moisture content on the storage compliance of the sample was highly significant than effect of the frequency applied, but effect of the frequency on the loss compliance of the sample was more significant than effect of grain moisture content. 3. In low moisture content, the percent energy loss of Japonica-type rough rice was much higher than that of Indica-type rough rice, but, in high moisture content, vice versa.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.36-51
• /
• 1996

In order to investigate the degradation behavior of PET fabrics, sodium diethylene glycolate (SDEG)-diethylene glycol (DEG) solutions were prepared and PET fabrics were treated in the solution. The dissolution rate constant and apparent activation energy of the PET fabrics were calculated by Eyring's and Arrhenius's equation respectively and measured dyeing properties, moisture and antistatic properties. Then compared SDEG-treated fabrics with NaOH-treated. The results were as follows; 1. PET fabrics decreased their weight in SDEG-DEG solution, and the decreasing rate showed a linear relationship to the treating time at constant temperature and concentration of SDEG-DEG solution. 2. The dissolution rate constant showed a linear relationship to the concentration of SDEGDEG solution and an exponential relationship to treating temperature. 3. Apparent activation energy of dissolution was 23.45 kcal/mol. 4. The K/S values and the ΔL values of fabrics treated with SDEG-DEG solution are higher and lower respectively than fabrics treated with NaOH. 5. SDEG-DEG solution treatment improved fabric's moisture regain and it reached almost maximum at about 40% weight loss. 6. In the both reagent the light, wet and sublimation fastness of fabrics are similar. 7. SDEG-DEG solution gave more electrical discharge effect to the fabrics than that of NaOH. 8. NaOH treated PET microfiber have crater-like surface, while SDEG-DEG solution give bathochromic effect to the PET microfiber because which has wrinkles on the surface.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.2
• /
• pp.306-310
• /
• 2005

The comparison in release rate constant and properties of extracts from extruded raw ginseng and extruded white ginseng was conducted to apply extrusion process for manufacturing of released ginseng tea bag. Dry raw ginseng and white ginseng powder were extruded at 20∼30% moisture content and 200∼300 rpm by using an experimental twin-screw extruder. Browness and redness (both indicated the releasing of saponin and ginsenosides) were increased with the increase in the screw speed and the decrease of moisture content. Crude saponin and water solubility index (WSI) of both ginseng also share the same behaviour against the level of screw speed and moisture content, as well as browness and redness. The particle size effects of extruded raw ginseng at 20% and 28% moisture content on absorbance of released extract at 260 up to 560 nm, WSI, and water absorption index were determined. While particle size decreased from 800∼1000 nm to 200∼500 nm, absorbance and WSI are decreased. Absorbance and WSI shown increasing level while moisture content was decreased. In conclusion, the formation of pores by expansion and disruption of cell wall in extrusion cooking were obviously responsible to increase the amount of released extract of extruded ginseng and its WSI as well. The extrusion process turns out be the efficient process for manufacturing of commercial ginseng tea product than those of other thermal processes.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.95-104
• /
• 2009

This study was conducted to evaluate the relationship between the dielectric constant and air void of asphalt concrete. Standard specimens that have air voids of various range $(0%{\sim}20%)$ were used to measure the dielectric constant using parallel plate method that measures low frequency dielectric constant. From the tests, dielectric constant of asphalt concrete was tend to decrease as the frequency was increased, and the decrement slope was varied with the types of asphalt binders. Dielectric constant was decreased linearly as air void was increased from zero to twenty percent. Consequently, the effect of temperature and moisture content on dielectric constants of asphalt concrete was evaluated to develop the standard curve between dielectric constant and air void of asphalt concrete. The standard curve developed in this study can be used to calibrate or develop the algorithm of non-destructive density gauge.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.358-364
• /
• 1995

In order to determine the moisture content level for safe storage of wild vegetables, drying characteristics and water vapor sorption characteristics of four vegetables, i.e., zucchini slice, sweet potato stem, taro stem, and platycodon, were investigated. The drying curves of these vegetables were consisted of three characteristic stages which were the initial settling down period, the constant drying rate period, and the falling drying rate period. And the falling rate period of the vegetables showed 2 or 3 parts of falling rate. All of the falling rate curves of the vegetables showed upwardly convex shape which is known as a characteristic pattern for the drying of fibrous food materials. The critical moisture contents of the vegetables were $8.29{\sim}9.75,\;10.40{\sim}15.08,\;9.51{\sim}14.52\;and\;3.29{\sim}3.56g\;H_2O/g$ dry solids for zucchini slice, sweet potato stem, taro stem, and platycodon, respectively. Activation energy values of drying rate during falling rate period were 2.30, 2.11, 4.97, and 2.80 kcal/mol for zucchini slice, sweet potato stem, taro stem, and platycodon respectively. The BET monolayer moisture contents of the vegetables were $10.05{\sim}13.59,\;9.49{\sim}12.69,\;9.50{\sim}16.48\;and\;5.01{\sim}5.44g\;H_2O/g$ dry solids for zucchini slice, sweet potato stem, taro stem, and platycodon, respectively. And these values were found to be very compatible with the values of the critical moisture content. Consequently, it was found that the moisture of these vegetables should be removed below the BET monolayer moisture content or below the critical moisture content for the long term storage.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.10-18
• /
• 2000

Nondestructive testing(NDT) by using ultrasonic sound is widely applied to wood for grading, moisture and defect detecting, estimating degree of decay, etc. Before practicing such application, basic relationships between ultrasonic transmission and wood properties shall be studied first. In this study, ultrasonic NDT was applied to larch and red pine to investigate the effects of moisture content and slope of grain on ultrasonic transmission speed. Specimens for testing about moisture content were prepared to have moisture content of green state, 30%, 20%, 10% and oven-dry state. Specimens for testing about slope of grain were prepared to have grain angle of 0, 15, 30, 45, 60, 75 and 90 degree in the tangential direction. Ultrasonic transmission speed was inversely proportional to moisture content in low range of moisture content under around 30% that was considered to be close to fiber saturation point. In high moisture content range above 30%, the ultrasonic transmission speed was almost constant. The same trend was observed in the relationships between compressive strength and moisture content. Slope of grain also had inversely proportional relationship with ultrasonic transmission speed and compressive strength. The relationship between compressive strength and ultrasonic transmission speed could be expressed by a linear equation.

• Journal of the Korean Society of Tobacco Science
• /
• v.1 no.2
• /
• pp.127-137
• /
• 1979

Three factors affecting cigarette weight, tobacco shreds length(cut width 0.9mm), moisture content and filling grower were studied for domestic brands. The results were obtained as follows. 1. When the moisture contents war법 changed by one per cent consecutively. filling power of tobacco shreds and cigarette weight were changed by 3.9 - 7.9 per cent for the former and by 5.7 - 7.6 per cent for the later. The longer the length of tobacco, shreds, the wider are the changing radios, and vice versa. 2. At constant moisture content (12 %), filling Power and cigarette weight were varied by 3.8- 22.8 per cent and by 2.9-29.4 per cent respectively due to the fluctuation of tobacco shreds length, The range of this variation was increased by reducing moisture content , and was decreased by increasing the moisture content. 3. The higher the blending ratio of shreds longer than 2 mm, the lower are the cigarette weights. 4. The operation standard weight of domestic brands was found 1- 9 per cent higher compared with the observed optimal cigarette weight in this study.