• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.37 no.3
• /
• pp.283-288
• /
• 2011

Since minerals are in ionic forms in aqueous phase (like deep sea water), it is very hard to incorporate concentrated minerals in gel like cosmetic formulations which are generally composed of carbomer or acrylates polymer. In this study, we invented a salt-resistant network formulation made of silicon copolyol. It was found that the network formulation traps minerals (especially from marine) in a mesh-like silicone copolyol structure. Since the mineral-containing formulation makes a very thin film on the skin, minerals could be easily absorbed into stratum corneum. In 6 weeks in vivo test, it was found that the novel mineral formulation increased the amounts of amino acids, major components of natural moisturizing factors (NMFs), as well as levels of minerals. It was also found that the moisture contents and the brightness of the skin increased.

• Journal of Forest and Environmental Science
• /
• v.23 no.2
• /
• pp.93-100
• /
• 2007

This study was carried out to select the utilizable vegetations for the stabilization of slopes and river banks, landscape creation and water quality cleansing in dams, lakes and streams. In this study, 4 species were investigated for their survival and growth characteristics in the complete and partly flooding conditions with various flooding periods. The results are as followings; Acorus calamus var. angustatus showed the highest flooding tolerance based on survival rate and growth condition. Equisetum hyemale, Acorus gramineus and Salix gracilistyla followed after Acorus calamus var. angustatus in the order of flooding tolerance. Particularly, A. calamus var. angustatus and E. hyemale showed higher survival rate and grew well even when they were completely submerged in the water up to 120 days. As they were partially submerged longer, they grew better. This ascertained that they had strong flooding tolerance. When A. gramineus were completely submerged in the water, their growth was disturbed but they did not die in the complete submergence up to 120 days. A. gramineus had a small growth disturbance and showed the highest vitality of leaves among the species. Though S. gracilistyla showed somewhat low growth rate in the complete water submergence and died in 90 days, it also can grow back to normal with some changes of water level.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.213-218
• /
• 2008

About 17% of historical properties in Korea were made of stones and most of them are exposed to weathering, as such that discoloring, cracking, and shattering occur from physical, chemical, mechanical, and biological effects due to outdoor placement. Proper treatments for conservation are necessary to prevent the weathering damage and to retain the original shape of stones. MMA, an acrylic monomer having low viscosity can be impregnated deep inside stones by consecutive compression and decompression process in a pressurized vessel. After the polymerization of MMA impregnate, the space inside of the stone was filled with PMMA. It is expected that water repellent and weather resistant properties will be improved because of the improved bonding of constituent materials in stones. In this study, moisture absorption, chemical resistance, and mechanical property of two domestic granites were examined after treating them with MMA for the purpose of determining the conservation value of this method that was possibly useful to the conservation of stone cultural assets.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.832-838
• /
• 1995

The purpose of this study was to evaluate the amount of marginal microleakage of 2 light curable GI cements(Fuji II LC & VariGlass), which contain some resin components. 4 volunteers kept on acrylic resin plates, which contained dentin disks with cavities filled with test materials for 2 weeks. The time when polishing was done(5 minutes and 24 hours after filling) and the use of protective agents were varied, so 8 groups with each 6 specimens were tested. After having specimens(disks with cavities filled with materials) penetrated with 1% Methylene Blue solution, specimens were stored in 40% nitric acid solution for 4 days to extract adsorbed dye material. Supernatants of centrifuged samples were diluted 5 times and Spectrophotometer was used to determine the degree of absorption. Dye concentration was calculated through the pre-obtained Linear Regression Curve. The results were as follows. 1. The best result was seen in groups (PF24, PV24) which were protected and polished 24 hours later and the opposite phenomenon was seen in groups(NF24, NV24) which were held without protection and polished 24 hours later. Groups polished S minutes later showed moderate leakage pattern. 2. Groups polished 5 minutes later showed similar leakage amount irrespective of using of protective agent. But statistically insignificant lower values were seen in VariGlass than in Fuji II LC groups, So It was considered that VariGlass may be more resistant to early moisture attack than Fuji II LC. 3. In groups polished 24 hours later, there was no significant difference between materials but was definitely significant difference according to the use of protective agent. If the cement in which polishing will be done 24 hours later, Protective agent should be used to cover the surface.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.299-304
• /
• 2019

This study was conducted to investigate the effects of skin surface temperature on transdermal absorption of active substances and changes in skin condition. A transdermal absorption test was conducted using an emulsion containing 10% heat-resistant niacinamide, and the same emulsion was used in a clinical trial to test the thermal effects. As a result, absorption was found to be 2 times greater at 10 minutes and 3 times greater at 15 minutes after application at $42^{\circ}C$ than that of compared to normal skin temperature. During the clinical evaluation on skin, no clinical subjects showed any specific adverse reactions, while moisture and oiliness showed statistically significant effects at higher temperatures. Based on these results, it was confirmed that thermal warmer improves the absorption of active substances and had a positive effect on skin condition. It is deemed that this study will provide a preliminary data to support the development of various beauty devices using heat.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2019.09a
• /
• pp.22-22
• /
• 2019

Green stem disorder (GSD) of soybean (Glycine max (L.) Merr.) is characterized by delayed senescence of stems with normal pod ripening and seed maturation (Hobbs, 2006). GSD complicates harvesting of soybeans by significantly increasing the difficulty in cutting the affected plants. There is also the potential for moisture in the stems to be scattered on the seed, reducing the grade and storability of the seed. Not only the cause of GSD is yet unknown, but also GSD cannot be evaluated until maturity, therefore the method to evaluate GSD in early growth stage with high sensitivity is necessary. In previous studies, it has been reported that vegetative storage protein (VSP) accumulates and the syndrome of GSD appears in soybean after depod treatment (Fischer, 1999). Soybean VSP is a storage protein which is abundant in young sink leaves and degraded during seed fill (Wittenbach, 1982). Hence, we have established a system to quantify VSP of high sensitivity by using standard protein made by genetically transformed E. coli and specific antibody against VSP, and studied the relationship between VSP and GSD, by depod experiment and drought/excess wet experiments. The result of depod experiment with the cultivar 'Yukihomare' was the same with the previous studies, VSP accumulated much more than control and the syndrome of GSD appeared in soybean in depod treatment. Drought and excess wet had different impact on GSD. Excess wet caused GSD of the cultivar 'Tachinagaha (GSD susceptible)', while drought caused a little syndrome of GSD in the cultivar 'Touhoku 129 (GSD resistant)'. The accumulation of VSP differed between the two cultivars over time. In conclusion, the accumulation of VSP came along with the emergence of GSD. Different cultivars showed different response to drought and excess wet. In the future, it is expected that the dynamics of VSP will be elucidated in detail, leading to the development of early diagnosis technology for green stem disorder and the elucidation of mechanism of soybean GSD.

• Journal of Environmental Science International
• /
• v.33 no.1
• /
• pp.17-25
• /
• 2024

This study aimed to determine the most suitable coir substrate mixing ratio for optimizing the growth and yield of the "lpduelkkae 1" cultivar. We comprehensively analyzed the physicochemical properties, growth, and yields of four different substrate combinations: perlite (coir with mixing ratios of 70:30 (PC30), 50:50 (PC50), and 30:70 (PC70)) and 100% coir (C100). The results revealed substantial differences in substrate properties. C100 exhibited the highest total porosity and the lowest solid phase, indicating excellent air permeability. The pH levels and electrical conductivity (EC) values ranged from 5.4-6.8 and 1.2-3.1 dS·m^-1, respectively. Leaf growth parameters, including length, width, and dry weight, showed positive correlations with high coir ratios, except for PC30. PC70 and C100 outperformed other substrates in stem growth, exhibiting superior stem diameter and fresh and dry weights. The quantity of marketable leaves was the highest in the C100 substrate. Furthermore, C100 comprised integrated levels of essential nutrients, such as Ca and Mg, owing to its high coir content. In conclusion, a coir ratio of approximately 70% (v/v) should be maintained in the substrate for creating an optimal cultivation environment. Furthermore, the selection of humidity-resistant varieties as well as precise nutrient and moisture management for different seasons and growth stages are crucial for a successful perilla leaf hydroponic cultivation.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.2
• /
• pp.94-100
• /
• 1990

Yongchonppon, one of the native varities, is the highest clod resistant. For its practical use, feeding test has been implemented in the ordinary rearing and in the branch rearing 1987 through 1988. The results are summarized as follows. 1. The feeding of Yongchonppong at the 4th and 5th instar made 5% decrease in spring and 10% decrease of cocoon yield in autumn, respectively, while cocoon shell ratio was a little less and percentage of raw silk was a little high, as compared to the feeding of Kaeryangppong. 2. The feeding of Yongchonppong at the 4th instar only showed nearly same nearing result as the feeding of Kaeryangppon. 3. In case of the feeding of yongchonppong at the 4th instar and early stage of the 5th instar, cocoon yield and percentage of raw silk marked 96% and 97-98% of Kaeryangppong. 4. The total nitrogen and crude protein of Yongchonnppong was less, while the total carbohydrate, crude ash and crude fat were high, as compared to those of Kaeryangppong. It had more phosphate and boric and less manganese than Kaeryangppong. 5. The leaf aereal weight of Yongchonppong was 1.57g/dcm2 and the leaf thickness was 113$\mu$. The moisture reducing rate marked 41.3% after three hour exposure to the air.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.79-86
• /
• 2010

Cold in-place recycling (CIR) using emulsified asphalt or foamed asphalt has become a more common practice in rehabilitating the existing asphalt pavement due to its cost effectiveness and the conservation of paving materials. As CIR continues to evolve, the engineered emulsified asphalt was developed to improve the field performances such as coating, raveling, retained stability value and curing time. The main objective of this research is to compare the laboratory responses of the engineered emulsified asphalt (CIR-EE) mixtures against the foamed asphalt (CIR-foam) mixtures using the reclaimed asphalt pavement (RAP)materials collected from the CIR project on U.S. 20 Highway in Iowa. Based on the visual observation of laboratory specimens, the engineered emulsified asphalt coated the RAP materials better than the foamed asphalt because the foamed asphalt is to create a mastic mixture structure rather than coating RAP materials. Given the same compaction effort, CIR-EE specimens exhibited lesser density than CIR-foam specimens. Both Marshall stability and indirect tensile strength of CIR-EE specimens were about same as those of CIR-foam specimens. However, Marshall stability and indirect tensile strength of the vacuum-saturated wet specimens of CIR-EE mixtures were higher than those of CIR-foam mixtures. After four hours of curing in the room temperature, the CIR-EE specimens showed less raveling than the CIR-foam specimens. On the basis of test results, it can be concluded that the CIR-EE mixtures is less susceptible to moisture and more raveling resistant than CIR-foam mixtures.

• Korean journal of applied entomology
• /
• v.22 no.1 s.54
• /
• pp.1-6
• /
• 1983

The survey on the occurrence and distribution of barley stripe disease was conducted in the farmer's field of 19 gun (county) throughout Yeongmm area in May of 1982, in order to obtain a basic information on the breeding of resistant varieties, and for control of the disease. The percent of infected culms of barley stripe disease in Gyeongnam province (Southern Yeongnam) was higher $(13.7\%)$ them in Gyeong-bug $(6.9\%)$, northern Yeongnam, and especially, Ham-an, Milyang, Eui-chang and Weol-seong were severly occurred. The cultivar of Millyang 6 was slightly infected while the cultivars Olbori and Oweolbori were severely infected by the disease. Among soil conditions, the barley plant grown in the loam, clay and clay loam texture which have more availble moisture, and that of the plant cultivated in the poorly drained soils were shown to have severe infection. The barley plant grown in the soils in local valley $(18.8\%)$ where is frequently over saturated with water showed the more infection the barley plant grown in plains $(9.5\%)$. Generally, the poorer the soil drainage the more severeinfection occurred. Among cultivation conditions, the earlier the sowing dates of the barley, the less the percent of infected culms was observed. The heavier or lighter application of N fertilizer than the optimum to barley plant seemed to cause more infection.