• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권4호
• /
• pp.1-9
• /
• 2001

The temperature and moisture distributions in a dry room with a heat and moisture source -i.e., workers- are studied numerically by using a standard $k-\varepsilon$ turbulence model. In order to evaluate the effectiveness of heat and moisture ventilation inside the room, the heat removal capacity and the moisture exhaust efficiency are introduced. The effectiveness of ventilation control is analyzed by evaluating the temperature and humidity distributions in the room quantitatively. It is found that the mean absolute humidity inside the room is almost constant regardless of the models and the heat generation rates in this study range. This results from the fact that the moisture generation by the workers was relatively small. Through the modification of the design, 40% improvement in critical decay time was achieved.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.445-448
• /
• 2004

Recently, bridge deck overlay with latex modified concrete is widely applied in domestic. the capacity of bridge deck overlay depends on bond state on the surface. factors that have an effect on bond state are clean condition on the surface, absence of surface microcracking, absence of laitance, overlay curing. In this study, it is researched that characteristic of bond strength according to moisture condition on the surface and the removal method of concrete. As a result, it shows high bond strength in dry condition when w/c is $31\%$ and in moisture condition when w/c is $38\%$ respectively. characteristic of bond strength according to the removal method of concrete shows high bond strength when using water-jets rather than jackhammers.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.321-333
• /
• 2023

In this study, lignin, a lignocellulosic biomass, was chemically modified to produce polyethyleneimine-grafted lignin (PKL) with maximum hexavalent chromium [Cr(VI)] adsorption capacity. Changes in the physicochemical properties due to the cationization of lignin were confirmed through elemental analysis, Fourier transform infrared spectroscopy, and moisture stability evaluation. Alginate (Alg) beads containing PKL (Alg/PKL) were prepared by incorporating cationic lignin into the Alg matrix to apply the prepared PKL in a batch-type water treatment process. The optimal Alg/lignin mixing ratio was selected to increase the Cr(VI) adsorption capacity and minimize lignin elution from the aqueous system. The selected Alg/PKL beads exhibited an excellent Cr(VI) removal capacity of 478.98 mg/g. Isothermal adsorption and thermodynamic analysis revealed that the Cr(VI) removal behavior of the Alg/PKL beads was similar to that of heterogeneous chemical adsorption. In addition, the bulk adsorbent material in the form of beads exhibited adsorption behavior in three stages: surface adsorption, diffusion, and equilibrium.

• 설비공학논문집
• /
• 제13권6호
• /
• pp.524-531
• /
• 2001

The temperature and humidity distribution in a dry room are studied numerically by using standard$\kappa-\varepsilon$ turbulence model. In order to evaluate effective heat and moisture ventilation characteristics inside the room, the heat removal capacity and moisture exhaust efficiency are introduced. An effective ventilation control is analyzed by evaluating quantitatively temperature and humidity distributions. It was found that the mean absolute humidity inside the room was almost constant with approximately 0.1905g/kg air regardless of the models and the heat generation rates. This was believed that the moisture generation by workers was relatively small. 40% improvement of the critical decay time was achieved, through the modifications of design variables.

• Carbon letters
• /
• 제7권3호
• /
• pp.171-179
• /
• 2006

A carbonaceous sorbent was prepared from rice husk via sulphuric acid treatment. After preparation and washing, the wet carbon with moisture content 85% was used in its wet status in this study due to its higher reactivity towards Cr(VI) than the dry carbon. The interaction of Cr(VI) and the carbon was studied and two processes were investigated in terms of kinetics and equilibrium namely Cr(VI) removal and chromium sorption. Cr(VI) removal and chromium sorption were studied at various initial pH (1.6-7), for initial Cr(VI) concentration (100 mg/l). At equilibrium, maximum Cr(VI) removal occurred at low initial pH (1.6-2) where, Cr(III) was the only available chromium species in solution. Cr(VI) removal, at such low pH, was related to the reduction to Cr(III). Maximum chromium sorption (60.5 mg/g) occurred at initial pH 2.8 and a rise in the final pH was recorded for all initial pH studied. For the kinetic experiments, approximate equilibrium was reached in 60-100 hr. Cr(VI) removal data, at initial pH 1.6-2.4, fit well pseudo first order model but did not fit pseudo second order model. At initial pH 2.6-7, Cr(VI) removal data did not fit, anymore, pseudo first order model, but fit well pseudo second order model instead. The change in the order of Cr(VI) removal process takes place in the pH range 2.4-2.6 under the experimental conditions. Other two models were tested for the kinetics of chromium sorption with the data fitting well pseudo second order model in the whole range of pH. An increase in cation exchange capacity, sorbent acidity and base neutralization capacity was recorded for the carbon sorbent after the interaction with acidified Cr(VI) indicating the oxidation processes on the carbon surface accompanying Cr(VI) reduction.

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.523-531
• /
• 2012

제습냉방시스템에서 주요 구성부품인 제습로터의 성능을 극대화 시키기 위한 방법으로 제습로터의 회전주기의 제어에 대한 연구를 수행하였다. 열과 물질전달의 과정을 모델화하여 얻은 수치해를 바탕으로 제습로터성능 시뮬레이션 프로그램을 구성하여, 재생공기 온습도, 풍량 등의 운전조건에 대하여 회전 주기에 따른 제습로터의 제습량을 구하였다. 성능 시뮬레이션 결과 검증을 위하여, 실험을 통해 측정된 값과 성능해석 모델을 이용하여 계산된 값을 비교함으로써 성능 시뮬레이션 모델의 타당성을 보였다. 각 운전조건에서 제습량이 최대가되는 제습로터의 회전주기를 최적 회전주기로 정의하였고, 회전주기를 고정(400s)할 때의 제습성능과 비교하여, 최적 회전주기제어가 제습성능에 미치는 영향을 분석하였다. 그리고 회귀분석법을 이용하여 재생온도, 외기상대습도, 풍량을 변수로 하는 최적 회전주기의 예측상관식을 개발하고 시뮬레이션 값과 비교하여 검토하였다.

• 한국토양환경학회지
• /
• 제5권1호
• /
• pp.85-96
• /
• 2000

본 연구의 목적은 수분함량 및 온도변화가 석유계탄화수소의 분해에 미치는 영향을 살펴보는 것이었다. 연구에 사용된 토양은 사질양토였으며 대상오염물질은 디젤오일이었다. 디젤오일의 초기오염농도는 건조질량기준으로 10,000mgTPH/kg이었다. 수분함량은 토양 수분보유능력의 50%, 70%그리고 90%로 조절하였으며 온도는 $5^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$, 그리고 $30^{\circ}C$로 변화시켰다. 석유계 총탄화수소의 분해는 수분함량이 수분보유능력의 50%와 70%에서 활발하게 일어났다. 온도는 10~3$0^{\circ}C$에서 석유계 총탄화수소의 분해가 활발하였으며 5$^{\circ}C$에서는 상대적으로 분해속도가 느리게 나타났다. 노르말알칸류의 분해속도는 석유계 총탄화수소에 비하여 약 2배 정도 빠르게 나타났다. 휘발에 의하여 손실된 석유계 총탄화수소는 초기 농도의 약 2% 내외였다. 대조실험으로서 공기공급을 하지 않은 경우와 biocide로 $HgCl_2$를 첨가한 경우에 석유계 총탄화수소의 분해가 미미하여 석유계 총탄화수소가 호기성조건하에서 생물학적 반응에 의하여 분해되었음을 보여주었다.

• KSBB Journal
• /
• 제15권5호
• /
• pp.469-473
• /
• 2000

본 연구는 실험실 규모의 biofilter를 이용하여 공기 중에 혼합되어 있는 대표적인 휘발성 유기화합물인 toluene기체를 제거하는 실험이다. 생물여과실험은 일반적인 조건하에서 오 염된 공기를 바이오필터의 상단으로부터 하단으로 흐르게 하 여 수행하였다. 반웅기 컬럼의 내부는 peat와 calstone (부피 비 5:3) 혼합물로 충진 되었으며, 충진재는 반응기에 채우기 전에 미생물 (Pseudomonas putida type A)과 잘 혼합하였다. 접종된 미생물은 충진 고체충에 고정화되어 생물막을 형성하 게 된다. 바이오필터는 다양한 툴루엔 농도와 유속조건에서 약 90일 이상 운전 되었으며, 최대 제거량은 유입 toluene량 $30 g/m^3hr$에서 $20 g/m^3hr$임을 알 수 있었다. 오염왼 공기는 체류시간 1-2 min에서 제거율이 20-90%끼지 변화하는 것을 보여 주었다 한편 운전중에 발생하는 압력강하는 $1.062 cmH_2O/m$ 정도로서 반응기 전체를 통하여 무시할 수 있을 정도로 낮았다.

• 한국축산시설환경학회지
• /
• 제21권1호
• /
• pp.29-34
• /
• 2015

This study was conducted to determine the amount of manure production from Holstein dairy cattle raised in bedded pack barn and the appropriate bedding material removal time. Total six heads of dairy cows (about 715 kg weight) were raised in three pens (two heads per pen) for 62 days. Average daily production of manure containing sawdust bedding was 21.2 kg per head and that of manure excluding bedding was 18.7 kg. Moisture content of bedding materials were significantly increased up to 86% of water holding capacity (WHC) of sawdust during the first 30 days. It kept very stable level after 30 to 50 days. Theoretically, 30 days after adding fresh bedding seems to be proper removal time only based on WHC. On the other hand, from a practical perspective, maximum 50 days after adding new bedding would be fine by comprehensively considering various factors such as bedding material purchasing cost, feeding environment and manure treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제52권5호
• /
• pp.488-503
• /
• 2024

Shoot waste refers to the parts of trees that are not yet optimally utilized. In this study, we aimed to utilize shoot waste of fast-growing teak (FGT) extracted from the community forest in Wonosari, Gunungkidul, Yogyakarta Special Region, Indonesia by converting it into charcoal, followed by further conversion into activated carbon. This study was conducted with two treatment factors of the activation process, including thermal treatment (750℃, 850℃, and 950℃) and heating period (30, 60, and 90 min), to determine the best condition for the activation process. Our results indicated a significantly effect of the interaction between thermal treatment and heating period on the moisture content, volatile matter content, ash content, fixed carbon content, and adsorption properties of the produced activated carbon. The highest iodine adsorption capacity of activated carbon is 1,102.57 mg/g, which was produced by thermal treatment at 750℃ and heating period of 30 min. This result fulfilled the Indonesian National Standard (SNI 06-3730-1995 quality standard). Furthermore, the quality parameters of the produced activated carbon include: moisture content of 6.13%; volatile matter content of 17.27%; ash content 5.24%; fixed carbon content of 77.49%; benzene removal efficiency of 8.43%; and methylene blue adsorption capacity of 69.66 mg/g. Based on this study, we concluded that shoot waste of FGT could be classified as a prospective material for developing activated carbon for industrial application.