• Korean Journal of Human Ecology
• /
• v.7 no.2
• /
• pp.113-119
• /
• 1998

The purpose of this study was to investigate the effect of geometrical structure on the heat transfer of insulating nonwovens. Commercially available single and double layered polyester nonwovens have used. Thermal conductivity, k and thermal conductance, h were measured by using a constant temperature sandwich type device at dry and wet state. The results obtained were as follows: 1. Double layered nonwovens showed slightly lower thermal conductance and higher warmability than single layered nonwovens. 2. As moisture regain increased, double layered nonwovens showed higher increasing rate of thermal conductivity than single layered nonwovens.

• Nuclear Engineering and Technology
• /
• v.9 no.2
• /
• pp.65-74
• /
• 1977

The radiation-induced graft polymerization of acrylic acid onto polyester fabric was investigated with accelerated electron beams as ratiation source at high dose rates. Homopolymerization was suppressed by addition of cations which is known as homopolymerization inhibitor, but this practical advantage was obtained at the expense of grafting efficiency. The rate of grafting (%/sec) was proportional to the 0.82th power of dose rates over the range from 1.6$\times$10$^{6}$ to 10$\times$10$^{6}$ rad/sec. The grafted polyester fabric showed considerable improvement in moisture regain and antistatic properties.

• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.261-267
• /
• 2002

Cotton fabrics were immersed in aqueous solution of N-methylmorpholine N-oxide(NMMO) with various concentrations, padded by 300% of pick-up, concentrated at $90^\circ{C}$ for 30min under constant-length condition, washed, and dried, to examine a possibility of linen-like finishing by the solvent bonding between fibers. With increasing the concentration of NMMO, cross-sections of fibers changed to oval or polygonal shapes and not only the fibers but also the warp and weft were bonded each other, which produced linen-like effect on the fabrics in the aspects of appearance and mechanical properties such as the Increase of stiffness and shear properties. The thickness, moisture regain and dyeability were increased with the concentration of NMMO.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.135-141
• /
• 2020

The primary and secondary alcohols in cellulose reacted with acrylonitrile(AN) in the presence of strong alkalis to form cyanoethylated cellulose. The partially cyanoethylated cotton(CEC) fabric with AN in the presence of aqueous sodium hydroxide solution was described, including effects of treatment time and reagent concentrations. The weight increases of cotton fabric were shown to be linearly related to the treatment time, temperature and concentration of sodium hydroxide. The physical properties such as shrinkage ratio and tensile strength were proportional to the weight increases without significant impact on elongation. But the moisture regain decreased with decreasing hydrophilicity. The degree of substitution(DS) and transfer ratio were linearly related to the weight increases. In the CEC with increasing weight up to 24.9%, it has been obtained with DS up to 0.63-0.67 cyanoethyl groups per anhydroglucose and transferring ratio up to 87.7%. The color fastness to washing by sublimation transfer printing was improved by the cyanoethylation.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.16-25
• /
• 1984

The sericin fixation of silk fabrics by epoxy resins was studied in the presence of aqueous salt solution in different solvents at the indicated temperature for the desired time. Heavy weight gains were obtained in the reaction with glycerol diglycidyl ether (EX-313) and ethylene glycol diglycidyl ether (EX-810) catalyzed by potassium thiocyanate in such solvents as carbon tetrachloride and p-chloroethylene. The obtained results were summarized as follows; 1) The tested resins were found similar in reaction behavior to silk fabric. The effect of fixation and weight gains was higher in EX-810 than EX-313. 2) The weight gains were increased with reaction time and temperature, and degumming ratio reached a constant value in 90 min at 70$^{\circ}C$. 3) The weight gains and the degumming ratio reached an equilibrium at 3-5% of epoxy concentration. 4) The weight gains were remarkably influenced and increased by the concentration of salt solution. The degumming ratio reached an equilibrium over 0.5N concentration of salt. 5) The weight gains were increased with the dipping time in gently-sloping. The degumming ratio reached an equilibrium over 15 min dipping. 6) The effect of sericin fixation of hydrophobic solvents, such as Carbon Tetrachloride, p-Chloroeth-ylene, Cyclohexane, Xylene and Toluene, was found suitable. 7) The effect of drying temperature was not remarkable on the weight gains and the degumming ratio. 8) There was a slight decrease in the moisture regain of sericin-fixed silk and it may be possible to maintain the moisture regain in the sericin-fixed silk by the epoxy resins. 9) The results on testing physical properties of sericin-fixed silk fabric were as follows; The crease recovery was almost not different from undegummed fabric, but inferior to degummed fabric. The tensile strength was improving in accordance with the effect of sericin fixation, either the elongation did.

• Journal of the Korean Home Economics Association
• /
• v.40 no.3
• /
• pp.11-20
• /
• 2002

The purposes of this study were to investigate the subjective wearing sensation of sleepwear, and to evaluate the comfort properties of fabrics used in the sleepwear. Design of experimental clothing was pajamas made with four types of woven fabrics: plain weave and satin weave made by cotton and polyester. The comfort properties were evaluated with respect to thermal retention, Qmax, moisture regain, water vapor transmission, and air permeability. The wear trials of experimental clothing were performed in two different environments, single-detached unit($23{\pm}1^{\circ}C$, $45%{\pm}3%$ R.H.) and apartment($27{\pm}1^{\circ}C$, $40{\pm}3%$ R.H), to evaluate microclimate temperature and humidity, and subjective wearing sensation. The results obtained from this study were as follows: 1. There were significant differences between the two environments on the clothing microclimate. 2. In the single detached unit environment, the microclimate temperature who wore cotton sleepwear was significantly higher than that of subjects wore the polyester sleepwear, whereas the microclimate humidity who wore polyester sleepwear was higher than that of subjects wore the polyester sleepwear. 3. In the apartment environment, the microclimate temperature who wore the polyester sleepwear showed higher than that of cotton sleepwear, whereas there was no significant difference between the cotton and polyester sleepwear on the microclimate humidity. 4 There were partially significant differences in subjective wearing sensation according to the fiber md weaving type of sleepwear regardless environment. 5. There were also partially significant correlations among the heat/moisture transmission properties of fabrics, the clothing microclimate and the subjective wearing sensation of sleepwear.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.2
• /
• pp.237-248
• /
• 2001

The purpose of this study was to compare the comfort sensation depending on four different kinds of denim blue jeans: cotton, cotton/tencel, tencel, cotton/pp. The objective and subjective experiments were conducted to measure the comfort of blue jeans. To investigate the objective comfort, physical properties related to thermal insulation, moisture properties and hand were measured. For subjective comfort measurement, 5 healthy female college students were taken as subjects. The outcomes of the experiments are as follows: The higher the air permeability and bulk density of the denim, the lower the thermal insulation, the thicker the denim, the higher the thermal insulation. Tencel blending denim showed the higher bulk density, the lower air contents, and consequently the lower thermal insulation than the other denims. Tencel showed the highest moisture regain, and cotton/tencel blend showed the highest water vapor permeability. Tencel denim had relatively better flexibility, shape stability and elastic recovery than the other denims. The total hand values of the denims by KES-FB system were not significantly different. Cotton and cotton/pp denims raised the subjects body temperature after excercise more than tencel or cotton/tencel denims. Average skin temperature was found to have a correlation with micro climate temperature and micro climate humidity. The correlation coefficients were 0.749 and 0.767, respectively. However, average skin temperatures were not significantly different among the materials. Pulse rate was found to be the highest when wearing cotton/pp and the lowest in case of cotton/tencel denim. The energy was consumed in order of cotton>cotton/pp>tencel>cotton/tencel. There was no significant difference in preference before excercise, but, after the excercise, the order of preference changed as the following; cotton/tencel>tencel>cotton/pp>cotton.

• Textile Coloration and Finishing
• /
• v.8 no.3
• /
• pp.36-51
• /
• 1996

In order to investigate the degradation behavior of PET fabrics, sodium diethylene glycolate (SDEG)-diethylene glycol (DEG) solutions were prepared and PET fabrics were treated in the solution. The dissolution rate constant and apparent activation energy of the PET fabrics were calculated by Eyring's and Arrhenius's equation respectively and measured dyeing properties, moisture and antistatic properties. Then compared SDEG-treated fabrics with NaOH-treated. The results were as follows; 1. PET fabrics decreased their weight in SDEG-DEG solution, and the decreasing rate showed a linear relationship to the treating time at constant temperature and concentration of SDEG-DEG solution. 2. The dissolution rate constant showed a linear relationship to the concentration of SDEGDEG solution and an exponential relationship to treating temperature. 3. Apparent activation energy of dissolution was 23.45 kcal/mol. 4. The K/S values and the ΔL values of fabrics treated with SDEG-DEG solution are higher and lower respectively than fabrics treated with NaOH. 5. SDEG-DEG solution treatment improved fabric's moisture regain and it reached almost maximum at about 40% weight loss. 6. In the both reagent the light, wet and sublimation fastness of fabrics are similar. 7. SDEG-DEG solution gave more electrical discharge effect to the fabrics than that of NaOH. 8. NaOH treated PET microfiber have crater-like surface, while SDEG-DEG solution give bathochromic effect to the PET microfiber because which has wrinkles on the surface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.5 s.142
• /
• pp.671-679
• /
• 2005

Chitosan is the affinitive finishing agent and gives susceptible effect in textile finishing. In order to examine the modification of polyester fabric treated with chitosan, we observed the characteristic of polyester fabric surface and measured its physical properties. For the purpose of confirming the adhesion of cationic material, we made a comparative study on anionic acid dye. The fabric was treated with crosslinking agent after chitosan finishing. Glutardialdehyde as crosslinking agent was used to improve the fixation rate of chitosan on the polyester fabric. And the US value was increased according to increasing of chitosan concentration. As the concentration of crosslinking agent was increased, whiteness index of the fabric chitosan treated was increased. Moisture regain of the fabric treated with $1\%$ chitosan was doubled and that treated with $2\%$ chitosan was tripled comparing with original fabric. Tensile strength of the chitosan treated fabric had been an increase of $10\%$ compared with alkali treated fabric and crease resistance decreased regardless of chitosan concentration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.4
• /
• pp.237-242
• /
• 2008

The tunic of Styela clava(SCT) consists of a proteoglycan network. Regenerated cellulose films were prepared by solution casting and coagulation of SCT in N-methylmorpholine-N-oxide(NMMO)/$H_2O$(87/13 wt%). The crystalline structure of powdered SCT was primarily that of cellulose I. The crystalline structure of SCT films exhibited a cellulose II structure, similar to that of viscose rayon. Physical characterization of SCT films and fibers revealed an intrinsic viscosity($\eta$) of 6.35 dL/g, average molecular weight($M_w$) of 423,000 g/M, and fiber density of 1.50 $g/cm^3$ with a moisture regain and water absorption of 10.20% and 365%, respectively. The results were similar to those of cellulose films regenerated from wood pulp. Films prepared with 6 wt% SCT exhibited strong tensile strength, high water absorption, and a greater degree of elongation. Scanning electron micrographs(SEM) of film cross-sections showed a layered, sponge-like structure.