• 한국농공학회논문집
• /
• 제59권1호
• /
• pp.57-70
• /
• 2017

In this study, we evaluated daily root zone soil moisture dynamics and agricultural drought using a near-surface soil moisture data assimilation scheme with Soil Moisture Active & Passive (SMAP, $3km{\times}3km$) soil moisture footprints under different hydro-climate conditions. Satellite-based LANDSAT and MODIS image footprints were converted to spatially-distributed soil moisture estimates based on the regression model, and the converted soil moisture distributions were used for assessing uncertainties and applicability of SMAP data at fields. In order to overcome drawbacks of the discontinuity of SMAP data at the spatio-temporal scales, the data assimilation was applied to SMAP for estimating daily soil moisture dynamics at the spatial domain. Then, daily soil moisture values were used to estimate weekly agricultural drought based on the Soil Moisture Deficit Index (SMDI). The Yongdam-dam and Soyan river-dam watersheds were selected for validating our proposed approach. As a results, the MODIS/SMAP soil moisture values were relatively overestimated compared to those of the TDR-based measurements and LANDSAT data. When we applied the data assimilation scheme to SMAP, uncertainties were highly reduced compared to the TDR measurements. The estimated daily root zone soil moisture dynamics and agricultural drought from SMAP showed the variability at the sptio-temporal scales indicating that soil moisture values are influenced by not only the precipitation, but also the land surface characteristics. These findings can be useful for establishing efficient water management plans in hydrology and agricultural drought.

• Journal of Forest and Environmental Science
• /
• 제39권4호
• /
• pp.235-245
• /
• 2023

Forest fuel moisture content is a crucial factor influencing the combustion rate and fuel consumption during forest fires, significantly impacting the occurrence and spread of wildfires. In this study, meteorological data were gathered using a meteorological measuring device (HOBO data logger) installed in the south and north slopes of Kangwon National University Forest, as well as on bare land outside the forest, from November 1, 2021, to October 31, 2022. The objective was to analyze the relationship between meteorological data and fuel moisture content. Fuel moisture content from the ground cover on the south and north slopes was collected. Fallen leaves on the ground were utilized, with a focus on broad-leaved trees (Prunus serrulata, Quercus dentata, Quercus mongolica, and Castanea crenata) and coniferous trees (Pinus densiflora and Pinus koraiensis), categorized by species. Additionally, correlation analysis with fuel moisture content was conducted using temperature (average, maximum, and minimum), humidity (average, minimum), illuminance (average, maximum, and minimum), and wind speed (average, maximum, and minimum) data collected by meteorological measuring devices in the study area. The results indicated a significant correlation between meteorological factors such as temperature, humidity, illuminance, and wind speed, and the moisture content of fuels. Notably, exceptions were observed for the moisture content of the on the north slope and that of the ground cover of Prunus serrulata and Castanea crenata.

• 한국식생활문화학회지
• /
• 제36권3호
• /
• pp.325-332
• /
• 2021

This study sought to investigate the effects of heat-moisture treatment (HMT) and ethanol treatment (EOH) for improving the quality and storage stability of Tteokbokki Tteok. The quality characteristics were evaluated by moisture, pH, color, texture profile analysis, and observing the microbial properties after the heat-moisture treatment or ethanol treatment. As the storage period increased, the moisture content of Tteokbokki Tteok tended to decrease except for the HMT group (p<0.05) while the pH did not show significant variation except for the EOH group (p<0.05). While measuring the color, the L-value tended to increase in all groups during the storage period. The a-value and the b-value showed the highest values in the HMT group and the control (CON) group, respectively. In the texture profile analysis, all groups showed a significant tendency to increase levels of hardness and chewiness as the storage period increased (p<0.05). The HMT group showed an increase in hardness and adhesiveness, which are characteristics of the HMT treatment. The results of examining the microbial properties of Tteokbokki Tteok showed that the total microbial count in the HMT group was 4.52 on the 8^th day of storage, which was lower than the level in the CON group and the EOH group on the 4^th day of storage. Yeast and mold were not measured during the storage period. Thus the results of this study showed that when manufacturing Tteokbokki Tteok, the heat-moisture treatment of rice powder increased the storage stability by delaying microbial growth and also had positive effects on quality.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.256-262
• /
• 2022

The timing of seed harvesting is an important decision in the management of seed orchards because it affects seed quality and yield. To investigate the effect of cone harvest time on seed quality and determine the optimal harvesting time, cones were regularly collected in seven times and germination tests were performed at each harvest time in two clonal seed orchards of Chamaecyparis obtusa. As cones developed, the percentage of seed germination increased before cone moisture content began to decrease significantly. The moisture contents of cones were highest at the first collection as 68.3% and 67.3% in Jeju and Gochang seed orchards respectively. At this time, germination speed was slowest, indicating poor seed vigour. The highest germination was found at the second stage in Jeju (36.5%) and at the seventh stage in Gochang (28.6%) seed orchard. The germination speed increased as cone moisture content decreased. Additionally, changes of seed vigour differed among the developmental stages in both seed orchards. Consequently, the optimal cone harvest time of C. obtusa seed orchards in Jeju was early September when high germination percentage was obtained. In Gochang seed orchards, late October was optimal cone harvest time when the germination speed was fast and the cone moisture content decreased.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.725-731
• /
• 2004

A field test program was conducted for the newly placed concrete pavement of US Interstate Highway 10 between March 26th and 28th, 2003. The test section was located between Van Horn and Sierra Blanca in Hudspeth County approximately 130 km east of El Paso, Texas. The main objective of the test was collecting moisture-related data to validate the models of effective curing thickness, evaporation rate, and moisture-based maturity. Effect of moisture loss on drying shrinkage strain was studied using additional test instrumentation.

• 한국식품조리과학회지
• /
• 제33권1호
• /
• pp.28-36
• /
• 2017

Purpose: This study was conducted to understand the factors that affect the texture of gluten-free rice pasta prepared buckwheat, mung bean, and acorn starches and to compare textural properties of samples 100% semolina. Methods: The moisture content, weight and water absorption test investigated and texture profile analysis measured by texture analyzer. Results: 100% semolina sample's value was lower than gluten-free rice pasta moisture content, weight and water absorption test. moisture content weight was in pasta with mung bean starchin pasta with buckwheat starch. Texture profile analysis showed that increasing amount of buckwheat, mung bean, and acorn starches increased hardness, chewiness, cohesiveness and springiness, and decreased adhesiveness of gluten free rice pasta. Conclusion: This study suggested that adding buckwheat, mungbean and acorn starches could improve texture properties of gluten-free rice pasta.

• 실천공학교육논문지
• /
• 제13권3호
• /
• pp.559-566
• /
• 2021

골재입도시험은 건설관련 전공교육에서 반드시 필요한 골재입도 시험결과에 대한 특정목적의 정확성을 평가하는 연구이다. 본 연구는 골재 함수비가 골재 입도 분석에 미치는 영향을 평가하기 위하여 수행되었다. 아스팔트 플랜트 콜드빈과 야적장에 저장된 골재의 함수비 변화를 1년간 모니터링하여, 그 결과를 기초로 함수비가 다른 골재 샘플을 제작하였다. 각 골재 샘플에 대한 입도 곡선을 분석하여 골재 함수비가 골재 입도 분석에 미치는 영향을 평가하였다. 입도평가결과, 함수비가 높아짐에 따라 오븐 건조 골재의 입도 분석에서 5 mm 이하의 입자에 대한 입자 크기의 오차가 증가하였으며, 이 오차는 입자 크기가 작아질수록 증가함을 확인하였다. 또한 5 mm 이상의 골재 입자에 대해서는 이러한 함수비 증가에 따른 입도 분석의 오차가 급격히 작아지는 것을 확인하였다. 이러한 비 절건 상태의 골재에 대한 입도분석의 오차가 아스팔트 플랜트 내 핫빈 골재 관리에 미치는 영향에 대한 분석을 수행하였다. 분석결과, 일반적인 아스팔트 플랜트에서 첫 번째 핫빈의 최소 골재 크기는 2.38 mm 이상이므로, 비 절건상태 골재로 인한 최대 입도 오차는 2% 미만인 것으로 조사되었다. 따라서 아스팔트 혼합물 생산품질관리를 위하여 콜드빈 비 절건상태 골재의 입도시험 결과를 사용하는 것은 가능해 보인다.

• Journal of Biosystems Engineering
• /
• 제23권3호
• /
• pp.229-244
• /
• 1998

This study was performed to determine proper fan and heater management schemes for natural air drying of rough rice in round steel bin with stirring device under Korean weather conditions. A computer simulation model was developed to predict moisture content changes, energy requirements, and drymatter losses during drying of rough rice by natural air. Drying test was conducted to validate the simulation model using round steel bin of holding capacity of 300ton at Rice Processing Complex in Jincheon. The bin was filled with rough rice every day and mixing by stirring device. Moisture contents, ambient air temperatures, relative humidities, static pressures in plenum chamber in the bin, airflow rates, and electrical and fuel energy were measured. Relative errors of moisture content changes predicted by the simulation model were below 5ft, and relative errors of final moisture content, final grain weight, required energy ranged from 0.9% to 6%. These not levels indicated that the simulation model can satisfactorily predict the performance factors of natural air drying system such as drying rates and energr consumptions comparing error level of 10% to 15% in other drying simulation models generally used in dryer desists. Twelve different fan and heater management schemes were evaluated using the computer simulation model based on three hourly weather data from Suweon for the period of 1952-1994. The best management schemes were selected comparing the drymatter losses, required drying times, required energy consumptions. Operating fan without heating only when ambient relative humidity was below 85% or 90% appeared to be the most effective method of In operation in favorable drying weather. Under adverse drying climates or to reduce required drying time, operating fan continuously, and heating air with $1.5^{\circ}C$ temperature rise only when ambient relative humidity was over 85% appeared to be the most suitable method.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.243-249
• /
• 2014

Currently, CFRP composites are rapidly replacing steel plates, as they are lighter, stronger, and more elastic; however, they are poorly suited to hygrothermal and impact-collapsed environments because moisture can alter their molecule arrangement and chemical properties. In this study, environments are experimentally simulated in order to investigate changes in the moisture absorption inside a CFRP composite and to determine its weakest point. Moreover, changes in the moisture absorption ratio at temperatures of $60^{\circ}C$ and $80^{\circ}C$ are studied and compared in order to understand how changes in temperature affect moisture absorption inside CFRP composites. Results show that moisture absorption leads to a strength reduction of around 50%. In addition, the moisture absorption rate inside CFRP composites is shown to change rapidly with increasing temperature. Accordingly, it showed that the change in matrix also has a weak point.

• 한국작물학회지
• /
• 제45권5호
• /
• pp.282-287
• /
• 2000

Soybean [Glycine max (L.) Merrill] crops, grown in a rice soybean rotation, can suffer when grown in soil with excessive moisture. The objective of this work were to determine the reduction in growth and yield, responses of vegetative and reproductive growth of soybean to excessive soil moisture achieved by prolonged irrigation. Responses of different cultivars were determined at growth stages from V6 to R8 to clarify the sensitive growth stages or characteristics to excessive soil moisture. Cultivar differences in response to excessive soil moisture condition were conspicuous in seed dry weight and harvest index (HI) but not in the response of seed number or pod number per plant. The timing of irrigation causing the condition of excessive soil moisture influenced the vegetative or reproductive traits. Soybean plants were more affected by irrigation commencing at the pre-flowering than at the post-flowering stage. Post-flowering irrigation did not reduce growth of vegetative organs significantly; in fact the growth of stems and leaves was facilitated by the prolonged irrigation commencing at flowering. Differences between cultivar response to prolonged irrigation were assumed to relate to the reduced amount of assimilates translocated to the reproductive organ.