• Journal of Aquaculture
• /
• v.5 no.2
• /
• pp.127-142
• /
• 1992

A feeding experiment was carried out to investigate the availability and feasibility of fish processing by-products as a substitute for frozen round fish in moist pellet diets for flounder, Paralichthys olivaceus. A control diet was prepared by incorporating $50{\%}$ frozen horse mackerel and $50{\%}$ commercial binder feed. In test diets the frozen horse mackerel of the control diet was replaced with either tuna scrap, tuna viscera, flatfish offal, deskinned hagfish, or tuna viscera ($20{\%}$) with frozen horse mackerel ($30{\%}$). Eighty flounders, 13.4 g in mean body weight, were stocked in 12 aquaria ($250\;{\ell}$ each) and fed six experimental diets for the first 28-day experiment. For the second 23-day experiment, forty flounders,44.8 g in mean body weight, were stocked and fed the same experimental diets. All treatments were duplicated. There were no significant differences in growth, feed efficiency and nutrient utilization among fish fed experimental diets containing either frozen horse mackerel, deskinned hagfigh, flatfish offal or tuna viscera with frozen horse mackerel. However, the feeding performances of fish fed experimental diets containing tuna scrap or tuna viscera were significantly lower than those of the control diet (P<0.05). There were no significant differences among the treatments on the proximate analysis values of the whole body. However, the crude lipid content of liver of the fish fed the experimental diet containing tuna scrap was significantly lower than that of the others. The results indicate that deskinned hagfish, and flatfish offal could be successfully substituted for frozen fish portion of moist pellet diets for flounder, but tuna viscera could only be partially substituted.

• Culinary science and hospitality research
• /
• v.17 no.3
• /
• pp.221-235
• /
• 2011

This study focuses on the qualitative characteristics of mackerel marinated with herb extracts. By differentiating the amounts of garlic, ginger and basil, the optimal amount of each ingredient to he added has been found. According to the result of the experiment, the highest level of preference has been shown for the combination of 3% of garlic, 3% of ginger and 2% of basil, generating the optimal amounts to be added. Since the pH change shown by the mackerel marinated by adding the optimal combination of 3% of garlic, 3% of ginger and 2% of basil is included in the range of pH 6.2-6.4, which is the initial point of decomposition for red-fleshed fish, it can be considered to be appropriate for the qualitative characteristics of the product. According to the differences test, GA3 bas shown the lowest level of strength, making it soft. Also, GA3 has shown the highest level of elasticity together with the characteristic of being moist. As a result, it can be said that garlic is better than ginger and basil. According to the preference test, GA3 has shown the highest level of preference in terms of appearance, flavor, texture, taste and overall preference. By considering the above results of the experiment, GA3 (3% of garlic) can be regarded as the optimal amount to be added.

• Journal of the East Asian Society of Dietary Life
• /
• v.11 no.6
• /
• pp.498-505
• /
• 2001

This study was conducted to investigate the characteristics of dough and bread prepared by a Korean pigmented rice(KPR). The fermentation of the dough was promoted with a lower pH. Though the springiness and gumminess of the dough were low, but It was more tender and moist than that of control. Color of the bread showed red wine and the acceptabi]ity of the bread was higher than control evaluated by sensory test. The tissue of the bread has more small particles of starch than that of control and It was densely populated. The distribution tendency of the starch particles in the tissue of the bread was the more apparent in the KPR. And big starch particles like lens were observed in the dough with 10% of KPR. Mouse feeling of the bread was more sticky but, it was little clogging.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.499-510
• /
• 1999

A computer program was developed for simulating performance(capacity, power consumption and etc.) of air-conditioners using compressor, fin-tube heat exchanger and capillary tube. The program consists of five modules, condenser, evaporator, compressor, capillary tube simulation modules and properties modules of refrigerant and moist air, The present program is focused on R22 only, however can be easily extended for other refrigerants such as R407C and R410A just by adding property modules. The compressor simulation module utilizes performance maps supplied by manufacturers-map-based model. The condenser and evaporator simulation modules are modeled using tube-by-tube method. Simulation results(capacity and power consumption) were compared with calorimeter test results of actual air-conditioners of window and split types, where more than 82% of the data lied within ${\pm}5$% of the predicted results.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.3
• /
• pp.212-221
• /
• 2007

Objectives : This study was conducted to test patients with Atopic Dermatitis by external application with Gynostemma Pentaphyllum MAKINO in cosmetics. Methods : We gave scores to 59 patients who visited the Dept. of Oriental Medical Opthalmology & Otolaryngology & Dermatology of Daegu Hanny Oriental Medical Center from July 1st, 2005 to December 31th. We checked the clinic index score(extent. intensity : the degree of erythema, induration or papulation, puritus, excorination, lichenification, scaling or dryness, erosion or oozing or weeping. the degree of itching), Eosinophil count and IgE. Results : There are 46 patients we could check by clinic index score, and 44 patients by laboratory. 1. In the 46 cases clinic index score was significantly decreased between the before- and afterexternal application treatment periods(P<0.01). 2. The 46 cases was devided into two types (moist heat type and blood dryness type) by intensity. External application of Gynostemma Pentaphyllum MAKINO in cosmetics did not significant change by two types. 3. In the 44 laboratory cases, the number of eosinophil counts was decreased but the number of IgE was significantly increased. Conclusions : Considering the above results, we have concluded that cosmetics with Gynostemma Pentaphyllum MAKINO have the remedical effect for Atopic Dermatitis.

• Journal of the Korea Furniture Society
• /
• v.10 no.2
• /
• pp.1-8
• /
• 1999

The use of structural wood based panels like plywood, OSB in many applications involves the use of nails, and data on the performance of panel-nail connection are needed for design and comparative purpose. This study was carried out to develop basic information on nail performance(withdrawal, embedding, nailhead push through) with water absorption in plywood and OSB. In withdrawal resistance test, initial stiffness of plywood performed better than OSB in 24hr soaked condition. The soaked condition reduced average nail withdrawal resistance value about 46% (12d mail), 53%(8d nail) in OSB, 17%(12d mail), 24%(8d mail) in plywood. The nail embedding strength of plywood also performed better than that of OSB and retention value(wet strength/dry strength) yielded similar in each nail types. The nail head push through capacity of OSB was higher than that of plywood in dry condition, but equal or lower in soaked condition. Therefore, critical consideration about structural panels is required in moist applications. The average values of nail withdrawal, nail embedding strength and nail head push through resistance of tested materials meet the minimum requirement of various specification and standards.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.5
• /
• pp.687-694
• /
• 1999

This study was conducted to develop new drying process for automatic control and marine engi-neering system. Air-water tests were carried out to investigate dryer performance. The dispersed flow in he dryer test apparatuses was also simulated by using a numerical code which solves the Dittus-Boelter equation for continuous liquid phase and the Reynolds equation of droplet motion for continuous liquid phase and the Reynolds equation of droplet motion for dispersed phase to predict droplet removal efficiency. Proper conditions for dehumidification were optimized by response ambient conditions. When the selected indexes were constrained in the range of 85-98% moisture content above $15^{\circ}$ and more than mass flow rates of moist air 750kg/h. The numerical results were compared with the experimental data pertaining to the removal effi-ciency at chamber stage and overall pressure drop along concentric tubes Good agreement was obtained as for the efficiency while relatively poor agreement was obtained for the relative humidity. The results also showed that the efficiency depended strongly on the relative humidity at the inlet condition which indicated the importance of estimating the heat exchanger length. Effects of some design parameters in both removal efficiency and breakthrough onset condition are discussed.

• Journal of Forest and Environmental Science
• /
• v.32 no.4
• /
• pp.329-343
• /
• 2016

The present study was conducted on ridge tops of moist temperate Oak forests in Garhwal Himalaya to assess the plant diversity, regeneration, biomass production and carbon assimilation in different Oak forests. For this purpose, three Oak forest types viz., (a) Quercus leucotrichophora or Banj Oak (FT1; between 1,428-2,578 m asl), (b) Quercus floribunda or Moru Oak (FT2; between 2,430-2,697 m asl) and (c) Quercus semecarpifolia or Kharsu Oak (FT3; between 2,418-3,540 m asl) were selected on different ridge tops in Bhagirathi catchment area of Garhwal Himalaya. A total of 91 plant species including 23 trees (8 gymnosperms and 15 angiosperms), 21 shrubs and 47 herbs species belonging to 46 families were recorded from all the ridge top Oak forests. The highest mean tree density ($607{\pm}33.60trees\;ha^{-1}$) was observed in Q. floribunda forest with lower mean total basal cover (TBC) value ($48.02{\pm}3.67m^2ha^{-1}$), whereas highest TBC value ($80.16{\pm}3.30m^2ha^{-1}$) was recorded for Q. semecarpifolia forest, with lowest mean stem density ($594{\pm}23.43stems\;ha^{-1}$). The total biomass density (TBD) across three Oak forests ranged between $497.32{\pm}83.70$ (FT1) and $663.16{\pm}93.85t\;ha^{-1}$ (FT3), while the total carbon density (TCD) values ranged between $228.75{\pm}22.27$ (FT1) and $304.31{\pm}18.12t\;ha^{-1}$ (FT3). Most of the tree species were found with good regeneration (GR) status (average 45%) in all the forest types whereas, few species were found not regenerating (NR) (average 17%) however, few new recruitments were also recorded. ANOVA (Post-Hoc Tukey's test at 5% significance level) indicated significant forest-wise differences in TBC, TBD and TCD (in tree layer); family and evenness (in shrub layer only) values, while insignificant differences were noticed in density values of tree, seedling and herb layer.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.290-299
• /
• 2006

Objectives: The purpose of this study is to evaluate the effect of ethylene glycol analogs on modulus of elasticity and ultimate tensile strength of moist, demineralized dentin matrix. Methods: Dentin disks 0.5 mrn thick were prepared from mid-coronal dentin of extracted. unerupted, human third molars. 'I' beam and hour-glass shaped specimens were prepared from the disks, the ends protected with nail varnish and the central regions completely demineralized in 0.5M EDTA for 5 days. Ultimate tensile stress (UTS) and low strain modulus of elasticity (E) were determined with specimens immersed for 60 min in distilled water $(H_{2}O)$, ethylene glycol $(HO-CH_{2}-CH_{2}-OH)$, 2-methoxyethanol $(H_{3}CO-CH_{2}-CH_{2}-OH)$, and 1,2-dimethoxyethane $(H_{3}CO-CH_{2}-CH_{3}-OCH_{3})$ prior to testing in those same media. Modulus of elasticity was measured on the same specimens in a repeated measures experimental design. The results were analyzed with a one-way ANOVA on ranks, followed by Dunn's test at ${\alpha}\;=\;0.05$. Regression analysis examined the relationship between UTS or E and hoy's solubility parameter for hydrogen bonding $({\delta}_{h})$ of each solvent. Results: The UTS of demineralized dentin in water, ethylene glycol, 2-methoxyethanol, and 1,2-dimethoxyethane was 24 (3), 30 (5), 37 (6), and 45 (6) MPa, ${\times}$ (SD) N = 10. Low strain E for the same media were 16 (13), 23 (14), 52 (24), and 62 (22) MPa. Regression analysis of UTS vs ${\delta}_{h}$ revealed a significant $(p\;<\;0.0001,\;r\;=\;-0.99,\;R^{2}\;=\;0.98)$ inverse, exponential relationship. A similar inverse relationship was obtained between low strain E vs ${\delta}_{h}\;(p\;<\;0.0005,\;r\;=\;-0.93,\;R^{2}\;=\;0.86)$. Significance: The tensile properties of demineralized dentin are dependent upon the hydrogen bonding ability of polar solvents $({\delta}_{h})$. Solvents with low ${\delta}_{h}$ values may permit new interpeptide H-bonding in collagen that increases its tensile properties. Solvents with high ${\delta}_{h}$ values prevent the development of these new interpeptide H-bonds.

• International Journal of Oral Biology
• /
• v.41 no.4
• /
• pp.243-251
• /
• 2016

This study was undertaken to achieve a high bleaching efficacy with plasma, through longer application and reparative bleaching processes, by different shade evaluation methods. Extracted human teeth were divided into 6 groups (n=10). All teeth were treated in pairs. Low concentration of 15% carbamide peroxide (CP) was applied, with and without plasma, for 10, 20, and 30-min tooth bleaching, respectively. The bleaching procedure was repeated once daily for four days. The teeth were maintained in a moist environment provided by artificial saliva. The Vitapan Classical shade guide and Commission Internationale de L'Eclairage (CIELAB) color system were collectively used to measure the bleaching efficacy. Color evaluation was statistically analyzed using Student t-test and one-way analysis of variance (ANOVA) complemented by Tukey's test. Combining the plasma with 15% CP showed significantly greater color changes compared to bleaching without plasma (p<0.05). A high bleaching efficacy with plasma is proportional to the repetitive application and the treatment time. A 30-min application with plasma provided the best bleaching. Repetitive bleaching showed lower probability of color relapse of the bleached tooth. The color change by shade guide correlated with the changes in CIELAB color system. A value of 1 color change units (CCU) conversion factor for overall color change (${\Delta}E$) values comparisons was 3.724 values. The two measuring methods provide a more accurate correspondence of color change. The repetitive and longer application for tooth bleaching, combined with plasma, has a strong bleaching effect and produces whiter teeth.