• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.843-849
• /
• 2010

This paper presents definition of symmetry of a ship section where three symmetries are proposed: material, geometric, and load symmetries. Precise terminologies of centroid, moment plane, and neutral axis plane are also defined. It is suggested that force vector equilibrium as well as force equilibrium are necessary condition to determine new position of neutral axis due to translational and rotational mobility. It is also stated that new reference datum of ENMP(elastic neutral moment plane), PNMP(fully plastic moment plane), ENAP(elastic neutral axis plane), and INAP(inelastic neutral moment plane) are required to define asymmetric section properties such as second moment of area, elastic section modulus, yield moment, fully plastic moment, and ultimate moment. Since collision-induced damage and flooding-induced biaxial bending moment produce typical asymmetry of section, the section properties are calculated for a typical VLCC. Geometry asymmetry is determined from ABS and DNV rules and two moment planes of 0/30 degs are assumed for load asymmetry. It is proved that the property reduction ratios directly calculated from second moment of area are usually larger than area reduction ratio. Reduction ratio of ultimate moment capacity shows almost linearly proportional to area reduction ratio. Mobility of elastic and inelastic neutral axis planes is visually provided.

• 터널과지하공간
• /
• 제20권3호
• /
• pp.225-232
• /
• 2010

본 연구에서는 절리에 작용하는 수직변형과 전단 팽창을 고려할 수 있는 수정된 3차원 변형률 의존성 수리전도도 변화 방정식을 제안하였다. 현지 암반을 직교절리가 발달한 매질로 가정하기 때문에 제시된 방정식을 사용하여 수리전도도의 이방성을 평가할 수 있다. 현지암반의 변형계수를 필요로 하는 탄성계수감소비를 손쉽게 결정하기 위하여 GSI와 교란계수를 기초로 하는 경험식을 사용하였다. 현지 암반 내에 존재하는 절리는 일반적으로 전체좌표계와 평행하지 않고 기울어져 있는 경우가 많기 때문에 기울어진 방향에서의 수리전도도를 구하기 위하여 변형률 회전식을 사용하였다. 해석 결과 GSI가 증가함에 따라 수리전도도는 감소하는 것으로 나타났다. 교란계수는 수리전도도의 변화 거동에 영향을 미치는 것으로 나타났는데 특히 GSI가 50 이상인 암반의 수리전도도 변화에 큰 영향을 미치는 것으로 해석되었다. 절리의 경사도 수리전도도 변화에 영향을 미치는 것으로 나타났다.

• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.85-96
• /
• 1994

공진주 실험기는 전단탄성계수, 영계수 및 감쇠비로 표현되는 지반의 동적물성치를 연구하기 위한 중요한 실내 실험법으로 널리 사용되어 왔다. 본 연구에서는 Stokoe식 공진주 실험기를 이용하여 전단 변형률 10-4%-10-1% 범위에서 대표적인 국내 노상토의 동적 물성치를 연구하였다. 전단탄성계수와 감쇠비는 한계변형률 Ix10-3%부근에서 부터 변형률의 영향을 받기 시작 하였다. 한계 변형률 이하에서 최대 전단탄성계수(Gmin)는 구속압 (Qc)에 따라 (Qc)0.61에 비례하여 증가하였고 최소감쇠 비(Dmin)는 1%-5.7% 범위에 분포하였다. 한계 변형률 이상에서 정규화 탄성계수 감소곡선은 Ramberg-Osgood식으로 잘 나타낼 수 있으며 Seed와 Idriss가 사질토 를 이용하여 얻은 감소곡선과 거의 일치하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.63-64
• /
• 2015

This study has analyzed mechanical and dry shrinkage properties according to the recycled coarse aggregate by nominal strength actually being widely used at the Remicon companies for the purpose of qualitative improvement of concrete, practical use and examination at various strengths. As a result, although the modulus of elasticity showed a tendency of getting decreased as the replacement ratio of recycled coarse aggregate has increased, the difference was insignificant while the compressive strength showed a tendency of about 3MPa increase in the recycled coarse aggregate replacement ratio of 30% compared to the ratio of 0%. In case of the dry shrinkage length variation ratio, the recycled coarse aggregate replacement ratio of 30% showed a tendency of about 20% shrinkage reduction compared to the ratio of 0%.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.186-192
• /
• 2007

In general, pulsation damper is installed in fuel rail for conventional MPI engine to decrease undesirable noise in vehicle cabin room. However, pulsation damper is so expensive that there are prevailing studies to reduce fuel pressure pulsations with integrated damping effect. This paper is one of basic studies for development of fuel rail to abate pulsations with self-damping effect. Primarily, the pressure pulsation characteristics was investigated with aspect ratio of cross section, wall thickness, and materials of fuel rail. A high aspect ratio or thin wall was found to absorb the pressure pulsations effectively. But volume effects on the fuel pressure pulsation reductions were not especially significant than cross section effects because volume increment rate is larger than pressure pulsation reduction rate. The fuel rail made of aluminum is effective for reduction of pressure pulsation than that of low-carbon steel. Pressure change period increases on the basis of same lengths of supply line and fuel rail as the volume is enlarged and/or the thickness of wall is thinned.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.315-322
• /
• 1997

This paper describes an experimental study on the seawater resistance of steel fiber reinforced concrete. The test method adopted for this study may be devided into long-term immersion test and accelerated test by wetting and drying. Test were carried out to evaluate the procedure in which reduction in dynamic modulus, length change and compressive strength to nine months were measured. Resistance indicators are the water - cement ratio, the content of steel fiber, the immersion water(artificial seawater or freshwater). The conditions of intervals of immersing in artificial seawater and drying, low water-cement ratio, and non-steel fiber became most deteriorated.

• 한국도로학회논문집
• /
• 제17권6호
• /
• pp.19-26
• /
• 2015

PURPOSES : This study intends to develop an inorganic soil pavement material using industrial by-products and to evaluate its applicability as a road pavement material. METHODS : In this study, a compressive strength experiment was conducted based on the NaOH solution molarity and water glass content to understand the strength properties of the soil pavement material according to the mixing ratio of alkali activator. In addition, the strength characteristic of the inorganic soil pavement material was analyzed based on the binder content. The performance of the soil pavement was evaluated by conducing an accelerated pavement test and a falling weight deflectometer (FWD) test. RESULTS : As a result of the soil pavement material test based on the mixture ratio of alkali activator, it was identified that the activator that mixed a 10 M NaOH solution to water glass in a 5:5 ratio is appropriate. As a result of the inorganic soil pavement materials test based on the binder content, the strength development increased sharply when the amount of added binder was over 300 kg; this level of binder content satisfied 28 days of 18 MPa of compression strength, which is the standard for existing soil pavement design. According to the measured results of the FWD test, the dynamic k-value did not show a significant difference before or after the accelerated pavement testing. Furthermore, the effective modulus decreased by approximately 50%, compared with the initial effective modulus for pedestrian pavement. CONCLUSIONS : Based on these results, inorganic soil pavement can be applied by changing the mixture proportions according to the use of the pavement, and can be utilized as road pavement from light load roads to access roads.

• 콘크리트학회지
• /
• 제9권3호
• /
• pp.189-197
• /
• 1997

본 연구에서는 보통의 일반콘크리트와 플라이애쉬를 혼입한 강섬유보강 콘크리트의 해수에 대한 저항성을 고찰하기 위하여 수행되었다. 콘크리트 배합 인자를 물.시멘트비, 강섬유혼입률, 플라이애쉬 혼입률별로 각각 제조하였으며, 표준수(수도물)와 인공으로 제조한 해수에 장기간 침지한 경우와 건조와 습윤의 반복작용에 의한 촉진시험으로 시험을 수행하여 콘크리트의 성능저하에 미치는 영향을 비교.고찰하였다. 시험방법은 소정의 재령에 각각의 배합조건별로 압축강도와 재령 1일을 기준으로 길이변화와 동탄성계수를 측정하여 성능저하정도를 비교분석하였다. 그 결과 강섬유와 플라이애쉬의 적정량의 혼입은 콘크리트의 내해수성을 현저히 개선시키는 효과를 나타내었다.

• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.63-76
• /
• 2007

본 연구에서는 콘크리트 포장에 덧씌우기를 하였을 때 다축차륜하중에 의한 응력분포특성을 분석하기 위하여 변환영역에서의 해석법을 개발하였다. 덧씌우기는 기존의 슬래브와 완전히 부착이 되었을 경우와 전혀 부착이 되지 않았을 때의 두 가지 극한 조건을 기준으로 분석을 하였다. 차륜하중은 복륜단축, 복륜복축, 복륜삼축 등 복륜다축하중을 고려하였으며 덧씌우기의 두께, 탄성계수, 포아송비 등이 응력분포에 미치는 영향을 분석하였다. 변환영역에서의 해석법을 이용하여 덧씌우기 포장을 분석하는 방법에 대하여 상세히 설명하였으며 해석결과의 정확성은 유한요소법을 이용한 해석결과와 비교하여 검증하였다. 해석을 수행한 결과 덧씌우기의 두께, 탄성계수, 포아송비의 증가는 기존 슬래브 하부의 최대인장응력을 감소시키며 감소 정도는 부착 덧씌우기가 비부착 덧씌우기에 비해 더 큰 것을 알 수 있었다. 또한 덧씌우기의 포아송비가 응력에 미치는 영향은 그리 크지 않은 것을 알 수 있었으며 부착과 비부착 덧씌우기 포장에서 덧씌우기의 두께 및 탄성계수의 증가에 따른 기존슬래브의 최대응력 감소특성도 분석하였다. 그리고 하중의 축수에 따른 부착과 비부착 덧씌우기 포장의 응력분포 및 최대응력특성도 분석하였다.

• Macromolecular Research
• /
• 제17권6호
• /
• pp.378-387
• /
• 2009

This research compared three methods for producing and processing nanocomposite polypropylene filament yarns with permanent antimicrobial efficiency. The three methods used to mix antimicrobial agents based on silver nano particles with PP were as follows: 1) mixing of PP powder and inorganic nanocomposite filler with the appropriate concentration using a twin-screw extruder and preparing granules, 2) method 1 with a singlerather than twin-screw extruder, and 3) producing the masterbatch by a twin-screw extruder and blending it with PP in the melt spinning process. All pure polypropylene samples and other combined samples had an acceptable spinnability at the spinning temperature of $240^{\circ}C$ and take-up speed of 2,000 m/min. After producing as-spun filament yarns by a pilot plant, melt spinning machine, the samples were drawn, textured and finally weft knitted. The physical and structural properties (e.g., linear density, tenacity, breaking elongation, initial modulus, rupture work, shrinkage and crystallinity) of the as-spun and drawn yarns with constant and variable draw ratios (the variable draw ratio was used to gain a constant breaking elongation of 50%) were investigated and compared, while DSC, SEM and FTIR techniques were used to characterize the samples. Finally, the antibacterial efficiency of the knitted samples was evaluated. The experimental results revealed that the crystallinity reduction of the as-spun yarn obtained from method 1 (5%) was more than that of method 2 (3%), while the crystallinity of the modified as-spun yarns obtained with method 3 remained unchanged compared to pure yarn. However, the drawing procedure compensated for this difference. By applying methods 2 and 3, the drawing generally improved the tenacity and modulus of the modified fibers, whereas method 1 degraded the constant draw ratio. Although the biostatic efficiency of the nanocomposite yarns was excellent with all three methods, the modified fabrics obtained from methods 1 and 2 showed a higher bioactivity.