• Journal of Wellbeing Management and Applied Psychology
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2022

Purpose: This study aimed to investigate spatial and temporal features of motor control in an individual with hemiparesis during the curvilinear gait (CG) and proposed an exercise guideline. Research design, data and methodology: An individual aged 63 with hemiparesis by stroke disease was participated in the study. Autoencoder (AE) was used to extract four motor modules from eight muscle activities of the paretic leg during CG. After extraction, each module of four modules was operationally defined by numbering from M1 to M4 according to spatial and temporal features and compared with results reported in a previous study. Results: As a result, an individual with hemiparesis had motor module problems related to difficulty of weight acceptance (module 1), compensation for the weakness of ankle plantar flexor (module 2), a spastic synergistic pattern (module 3) and difficulty with transition from the swing to stance phase (module 4) in terms of spatial features. Also, a delayed activation timing of temporal motor module (module 2) related to the forward propulsion during CG was observed. Conclusions: Gait rehabilitation for the stroke will need to consider clinical significances in respect of the deterioration of motor module and provide the tailored approaches for each gait phase.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2073-2078
• /
• 2007

This study was performed to develop a dryer for home clothes using thermoelectric module. The thermoelectric module was used as a heat source and a dehumidification device because it has heating part and cooling part at once. To design for maximizing the energy efficiency and the rate of dehumidification, the parameters of the dryer using thermoelectric module are heat capacity and air flow rate. This study showed that the thermoelectric module can be used in the clothes dryer and energy efficiency of clothes dryer be better than that of electric heating dryer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.473-479
• /
• 2015

Hybrid supercapacitors with high power density and long cycle life are widely used for emergency power source of LED emergency luminaires. In this paper, we designed and fabricated a hybrid capacitor cell and a module for the LED emergency luminaires. Using hybrid supercapacitor cells (1,000 F, 2.8 V), we designed a module in a 10-year warranty considering aging and ESR. Considering the ESR and efficiency has been designed to module with 1,000 F 5.6 V design results in 2 series and 2 parallel combination. Module was used to confirm that the operation 77.5 minutes at room temperature, discharge LED emergency luminaires with 2 W. As a LED emergency luminaires of emergency power supply that we can support more than 10 years of life was confirmed the applicability of hybrid supercapacitor.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.92-98
• /
• 1995

In the cluster tool, it is necessary to precisely control the vacuum pressure for the wafer transportation between transport module and cassette or process modules with the range of 1*10$^{-4}$ to 5*10$^{-5}$ torr. So we have designed the pressure control system for the transport module of the cluster tool and have evaluated its performance. Digital PID is utilized with the weighted sum of both three previous errors and one current error. The feedback signal is put into the nitrogen mass flow controller using the transport module controller. This pressure control system can prevent the transport module from the particle generation and backstreaming of hazardous process gases of the process chamber.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.4
• /
• pp.341-347
• /
• 2004

An experimental study has been carried out on cooling perfonnance of a thennoelectric module. This problem is of particular interest in the design of the refrigeration systems using thermoelectric module, such as cosmetic refrigerator, wine cellar and air cooler. The effect of the input voltage and the hot side temperature on the cooling performance is studied in detail. The $\Delta$T, temperature difference between cold side and hot side surface of thermoelectric module, is described in terms of the input voltage and the hot side temperature. It is found that the cooling capacity can be improved by increasing the input voltage and by reducing the heat from the hot side of the thermoelectric module. However, COP is decreased with an increase in the input voltage, since power consumption is also increased. Thus, optimum input voltage can be selected based on cooling capacity and COP.

• Solar Energy
• /
• v.18 no.3
• /
• pp.119-128
• /
• 1998

This study has been carried out to develop a thermo-diode system capable of adjusting heat flow direction, solar absorptivity and thermal capacity. What we call "Smart Module" here has emerged from a series of repeated processes involving design, construction and test. In all, it is found that liquid thermo-diode systems are viable in harnessing the sun's energy. The module can be applied for space heating in winter and reduce the cooling load of buildings in summer.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.1
• /
• pp.73-79
• /
• 2006

The integration of PV modules into building facades or roof could raise PV module temperature that results in the reduction of electrical power generation. Lowering operating temperature of PV module is important in this respect, and PV module temperature should be considered more accurately, for building-integrated PV(BIPV) systems in predicting their performance. This paper describes a BIPV solar roof design and verifies its performance through experiment In relation to the effect of ventilation in space between PV module and roof surface. The results showed that the ventilation in the space had a positive effect in lowering the module temperature of the BIPV solar roof that enhanced the performance of its electricity generation.

• Journal of the Korean School Mathematics Society
• /
• v.4 no.1
• /
• pp.69-80
• /
• 2001

A web-based intelligent education system(WEST) was designed and implemented to improve the self-directed study for students by providing them the study according to one's ability. WEST is composed of a tutor agent, an administrator module, a teacher module and a student module. The tutor agent analyzes students' ability and selects questions from a database according to their ability. The administrator module administrates subjects and students. The teacher module makes questions with three levels and administrates questions. The students module gives the questions students and the result of study. WEST was used in a mathematics subject for high-school students. Especially our system was better than the others in study according to students' ability.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.401-406
• /
• 2005

According to the ubiquitous times that is new important topic, the miniature is demanded in the industry at large. The high accuracy and accumulation make the assembly equipment and the production equipment huge from the size of view. The huge equipment brings about the expensive price of the equipment, a low flexibleness and a low productivity. It makes the manufacturing equipment huge that the accuracy only depends on the mechanism stiffness. The position of two assembled parts is transformed with the global coordinate system whose datum is machine coordinate system. The purpose of this research is invention of the module that can adjust one part to the order part automatically. The module that has a function of self adjustment only takes a stiffness in assemble direction and can be moved freely in the other direction so this function makes a self adjustment. The self adjustment module reduces the tact time and also diminishes the inferior goods and makes reconfigurable machine in $\mu-part$ assembly.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.52.4-52
• /
• 2001

In this paper we propose a framework of an open architectured manufacturing system base on CORBA middleware. The manufacturing system consists of four configurable software modules 9mchine control module, database module, monitoring module, and operation module). Each module is distributed through the network and integrated with CORBA middleware technology. CORBA Characteristics including independence from programming languages, computing platforms and networking protocols makes us to easily develop new applications and to effectively integrate new module into existing distributed systems. The CORBA program used in this study is The ACE ORB (TAO) developed by the laboratory in Washington University.