• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1673-1675
• /
• 2004

The design, modeling and measurement of RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a LTCC multi-layer switching circuit and integrated low pass filter. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.459-462
• /
• 2004

In this paper, we present a reducing power consumption of a scheduling for module selection under the time constraint. A a reducing power consumption of a scheduling for module selection under the time constraint execute scheduling and allocation for considering the switching activity. The focus scheduling of this phase adopt Force-Directed Scheduling for low power to existed Force-Directed Scheduling. and it constructs the module selection RT library by in account consideration the mutual correlation of parameters in which the power and the area and delay. when it is, in this paper we formulate the module selection method as a multi-objective optimization and propose a branch and bound approach to explore the large design space of module selection. Therefore, the optimal module selection method proposed to consider power, area, delay parameter at the same time. The comparison experiment analyzed a point of difference between the existed FDS algorithm and a new FDS_RPC algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1304-1307
• /
• 2002

In this paper, we describe the structure and the test results of a Bluetooth baseband module we have developed. The module has a distributed buffer, i.e. FIFO, for data stream. Bus interface of the module is designed on the basis of interface of microprocessor widely used and the external interface is designed to consider chips connected directly. Since the module performs as many hardware efficient tasks as possible, processing load of microprocessor is very small. It can also be controlled either by software or by hardware for flexibility. The fully synthesizable baseband module was fabricated in a $0.25\mu\textrm{m}$ CMOS technology occupying $2.79\times2.8{\textrm{mm}^2}$ area. And an FPGA implementation of this module is tested for file and bit-stream transfers between PCs.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.571-577
• /
• 2004

The impact behavior of TFT-LCD module is very complicated because the module is assisted with three parts such as back light unit, LCD Panel and top chassis. Especially, the back light unit is constructed with several small and thin parts made by plastics or steels. The design of the back light unit is very important because the recent demand is more lighter, thinner and narrower module. The aim of the present study is the investigation of mechanical characteristics during impact loading. The back light unit must assist TFT-LCD Panel made by glass and guide qualification of handling environment. This paper focus on the dynamic behavior of module and carries out a series of computer simulation using LS-DYNA program. Comparing with test results previously performed, dynamic characteristics of TFT-LCD module are estimated.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.33-38
• /
• 2022

A solar power generation system uses a solar module that collects solar radiation energy, a connecting board that collects DC power generated from the solar module, and a diode to prevent reverse current from flowing from an inverter to the solar module. The existing photovoltaic connection module consists of only fuses and diodes for reverse polarity and overcurrent blocking, and does not have fire diagnosis, prevention, and suppression functions in the event of a fire. To solve this problem, this paper presents a method to monitor the internal state of the photovoltaic connection module using several sensors and to prevent and extinguish a fire using solenoid valves and fire extinguishing agents when a fire is detected. Through the experiment, it was confirmed that the proposed method normally suppresses the fire in event of a fire.

• Journal of Astronomy and Space Sciences
• /
• 제25권2호
• /
• pp.227-238
• /
• 2008

위성항법 지상국 기술은 위성으로부터 위성항법신호를 받아 위성항법신호를 감시하고 분석하며 위성에 보정정보를 업로드하는 기술로써 위성항법 인프라 구축에 매우 중요한 기술이며 여러 응용분야에 적용할 수 있는 핵심 기술이다. 이 중 한국전자통신연구원에서 개발하고 있는 감시제어시스템은 GPS 및 갈릴레오 항법 위성으로부터 신호 감시 데이터를 수집하여 위성항법 제어센터로 제공하는 기능을 수행하는 소프트웨어 시스템이다. 이 논문에서는 위성항법 지상국의 구성과 감시제어시스템의 목적 및 형상을 소개한 다음, 감시제어시스템의 적용 알고리즘을 소개하고 감시제어시스템의 예비설계를 기술하였다. 감시제어시스템은 데이터 수집, 데이터 포맷팅 및 저장, 데이터 오차 보정, 항법해 결정, 독립 품질 감시, 시스템 운용 및 유지 등의 모듈로 구성되어 있다. 감시제어시스템의 예비설계는 유스케이스 모델, 도메인 설계, 소프트웨어 구조설계, 사용자 인터페이스 구조 설계 과정을 통하여 이루어진다. 각 단계별 설계과정은 UML(Unified Modeling Language) 표준 방식에 따라 이루어졌다. 이 연구에서 설계된 감시제어시스템은 지상국의 운용 능력을 향상시킬 뿐만 아니라 상세설계의 기초자료로 이용될 것이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 추계학술대회 논문집
• /
• pp.103-104
• /
• 2014

This paper presents design method of 250[W] grid connected PV-AC module with decoupling and energy storage functions to select optimized passive elements for stable operation. The validity of design of optimized elements is verified by simulation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1041-1045
• /
• 1998

This paper presents the control design of a three-module boost converter with a two-stage output filter. An advanced three-loop control scheme is employed to the control design in order to obtain good dynamic performance of the converter at the presence of the secondary filter stage. The paper presents the control design, dynamic analysis and performance improvement with the three-loop control.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.210-216
• /
• 2003

This study focuses on the physical environment and human activity of the user of train toilets, on the analysis of factors needed to obtain reasonable toilet design and it also focuses on the understanding of the interface between its user. Moreover it proposes a module of the development process and methods of approaching the User Toilet Interface. The study so presents a design standard under which the concrete data of the characteristics and practicable range and the convergent demands accelerate to the module could be confirmed and criticized.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.693-697
• /
• 1998

This paper presents the control design of a three-module boost converter with a two-stage output filter. An advanced three-loop control scheme is employed to the control design in order to obtain good dynamic performance of the converter at the presence of the secondary filter stage. The paper presents the control design, dynamic analysis and performance improvement with the three-loop control.