• New & Renewable Energy
• /
• v.17 no.2
• /
• pp.24-31
• /
• 2021

Renewable energy has become more popular with the increase in the use of solar power. Consequently, the disposal of defective and old solar panels is gradually increasing giving rise to a new problem. Furthermore, the efficiency and power output decreases with aging. Researchers worldwide are engaged in solving this problem by developing eco-module technologies that restore and reuse the solar panels according to the defect types rather than simple disposal. The eco-module technology not only solves the environmental problem, but also has economic advantages, such as extending the module life. Replacement of encapsulants contributes to a major portion of the module maintenance plan, as the degradation of encapsulants accounts for 60% of the problems found in modules over the past years. However, the current International Electrotechnical Commission (IEC) standard testing was designed for the commercialization of solar modules. As the problem caused by long-term use is not considered, this method is not suitable for the quality assurance evaluation of the eco-module. Therefore, to design a new accelerated test, this paper provides an overview of EVA degradation and comparison with the IEC and accelerated tests.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.11 no.2
• /
• pp.82-90
• /
• 2003

The work presented here is a design and an implementation of PID control system to regulate a supply duct outlet air temperature in PEM (Personal Environment Module). In PEM, the air is heated to the required temperature while it flows through the supply duct without any mixing chamber. This makes the control of air temperature in PEM difficult. A simulation is done first to understand the relationship between a temperature distribution in working area, flow rate and the outlet air temperature of PEM. Then a linear dynamic model of heating process in PEM is derived. P, PD and PID type control systems, to provide the rapid response without overshoot and saturation in heater command voltage, are designed using a linear model obtained. Experimentally obtained data shows that the control system satisfies the design criteria and works properly in controlling the supply duct outlet air temperature.

• Proceedings of the IEEK Conference
• /
• 2001.06c
• /
• pp.43-46
• /
• 2001

This thesis proposes the design method of intelligent robot agent system and deals with the implementation of the system which is able to produce key internet statistics. It is believed that the statistics lead to effective investment from internet industry on its development. The system consists of robot agent process module, statistics production module and management module, and has an algorithm that can produce periodically the number of domestic homepages, active domain using .kr or gTLD and intenet hosts. It provides the result of the implementation and performance of the system as well.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.497-500
• /
• 2005

This paper presents a design of a hybrid sensor chip which integrates an A/D converter module and a phase measurement module for measuring power line phase. Recursive sliding DFT based phase measurement module is designed using time shared multiplier which can reduce the size of SoC implementation. A/D converter is based on the sigma delta modulation in order to minimize the implementation space of the analog part and designed to obtain 8-bit resolution. Computer simulations and FPGA implementation are performed to verify hybrid sensor chip design. The hybrid sensor chip for 4-channel power line phase measurement is fabricated by using 0.35 micrometer CMOS process.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.4
• /
• pp.325-332
• /
• 2017

The engine cooling system is a device that maintains the temperature in the engine room at an appropriate level by driving a cooling fan when the temperature in the engine room generated during the vehicle operation occurs over a certain temperature. In recent years, the vehicle cooling system has changed to an electronic system. Therefore, in this paper, we design and develop a hall sensor based electronic engine cooling system. In this paper, a hall sensor module and an actuator module for engine cooling control system are designed. In order to verify the performance of the designed module, the magnetic field control was verified through the simulation of the diameter and the head of the coil.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.54-62
• /
• 1999

This paper describes the design and implementation of a PC(personal computer) based open architecture machine tool controller. The hardware of open architecture CNC has generally a motion control board on a PC for controlling a servo motor. But this paper describes open architecture hardware that consists of a PC, a counter board a DAC board and a DIO board only. This makes it easy to generate CNC software module in a hardware-independent way. The proposed open architecture CNC software runs on the MS-Windows NT. The paper describes a method of con-trolling servo motors using a real-time timer of MS-Windows NT and a commercial real-time operating system on the MS-Windows. NT. An open and reconfigurable software module is made up of an object and an API(application programming interface). Using the object and the API a new CNC system can be quickly configured to control dif-ferent machine tools. The proposed open architecture CNC system is applied to 4-axis lettering center.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.89-95
• /
• 1993

This paper presents the development of CAD system for the design of lens of the Turn Signal Lamp that can model and simulate its optical performance. The system consists of three main modules: skin surface modeling module, inner lens modeling module and optical performance simulation module. Skin surface geometry can be modeled by the input of data file and inner lens can be modeled by the input of only four parameter using its geometric characteristics. Also light distribution pattern, the barometer of optical performance is generated by means of finite ray tracing method. The system display modeled geometry, ray tracing and generated light distribution pattern.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.774-780
• /
• 2011

The guidance control module is needed for control of a GPS guided bombs to improve the accuracy and availability of a conventional bomb. In this paper, we present the development of hardware design, software design and test environments of it. And we also show the process of the tests and the results verifying and proving for its required functions and performances through ground tests and flight tests.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.330-335
• /
• 2001

Characteristics of the present world market include demanding and sophisticated customers, requirement of high quality and innovative products, greater product diversity, increasing labour and products costs, availability of diverse alternatives to the customers and smaller batch sizes to satisfy a variety of customer profiles. To fulfil these characteristics, manufacturing companies need to be flexible adaptable, proactive and able to produce variety of products in short time at low cost. The aim of the study is to develop a computer-aided design system for water-gate on AutoCAD R2000 system. The developed system has been written in AutoCAD and VisualLISP with a personal computer, and is composed four modules which are the gate-lifter input module, guide-frame input module, and upgrade module. Based on knowledge-based rules, the system is designed by considering several factors, such as width and height of a water-gate, material, object of product and maximum depth of water.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.267-270
• /
• 2006

COMS has two imaging payloads, MI (Meteorological Imager) and GOCI (Geostationary Ocean Colour Imager). In GOCI case, data are packaged per each slot - one part of 16 two-dimensional arrays for imaging sensors - so its generation algorithm is simple. But MI case, data are made up with sequences of 480 bit blocks and are transmitted to its ground station sequentially. Moreover there is no time information in each 480 bit MI block, so a system in its ground system should be attaching time information at received MI blocks. DM (Decomposition Module) is one module of IMPS that receives Raw Data from DATS and generates Level 0 Products that include time tagging. This paper explains DM design for MI of COMS payloads.