• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1155-1156
• /
• 2006

In this paper, we analyzed the effect of EVA Sheet Gel Content depending on curing condition for photovoltaic module. Gel Content was measured by manufacturing Glass/EVA Sheet/Back Sheet scheme at several curing temperature and curing time. And the surface analysis of EVA Sheet depending on process condition could be observed using SEM(Scanning Electron Microscope). Through this experiment, we could confirm that there are differences on Gel Content of EVA Sheet and surface configuration depending on curing temperature and curing time. To find out the optical characteristic dependency on curing condition, Class/EVA Sheet/Glass scheme was fabricated. The optical transmittance of EVA Sheet at visible wavelength was enhanced 5% when compared to Glass/Glass scheme. And the transmittance of $130^{\circ}C$/4min, $110^{\circ}C$/4min, $160^{\circ}C$/6min process condition was higher at ultraviolet wavelength range. These curing conditions could be regarded as the best process for suppression the discoloration speed of EVA Sheet under UV light.

• 한국결정성장학회지
• /
• 제17권1호
• /
• pp.11-17
• /
• 2007

The spherical NiZn ferrite particles were prepared by ultrasonic spray pyrolysis with mixed solution of aqueous metal nitrates. The NiZn ferrite particle was observed with nano-sized primary particles of about 10 nm or less before annealing which represented as paramagnetic behavior measured at 77 K and room temperature. The typical abnormal growth of primary particles like polyhedral primary particles was observed by annealing at 1273 K with Zn-concentration dependency. The XRD patterns showed good crystallinity of NiZn ferrite powder after annealing. In annealing process, the intra-particle sintering phenomenon was observed and the spherical particle morphology was collapsed at 1673 K. The saturation magnetization of NiZn ferrite powder for each annealing temperature was decreased with measuring temperature of $77{\sim}$300K.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.51-54
• /
• 2001

For performing Intelligent Transport System, I will implement the vehicle recognition system used image as well as Real time transmission module with TCP/IP. Generally, there are two kinds for vehicle recognition technology. Between two methods, the image-based method has a high dependency on environmental condition. Therefore, in this thesis I will propose vehicle recognition algorithm based on image using improved Gradient Method. Also I propose server-client modeling with TCP/IP, for the purpose of real time transmission of processed data and images. So I made the vehicle recognition and real time transmission system with TCP/IP for verification of proposed algorithm.

• 융합정보논문지
• /
• 제7권6호
• /
• pp.181-186
• /
• 2017

최근 아이들의 창의력 학습 및 놀이에 로봇이 활발하게 이용되고 있지만 대부분 로봇이 정형화된 형태를 가지고 있으며 프로그램의 의존도가 높아 창의력 학습 및 놀이에 어려움이 있다. 우리는 이러한 단점을 보완하기 위해 정형화 되지 않은 모듈 형태의 로봇구조를 가지고 있으면서 결합을 쉽고 안정적으로 할 수 있도록 하였고 하나의 버튼을 이용하여 사용자가 원하는 동작을 기억시키고 기억된 동작을 똑같이 재생하는 로봇을 제작 하였다. 또한 모듈 사이를 무선으로 연결하고 정보를 공유하여 다수의 모듈이 결합 되었을 경우 어느 모듈에서나 버튼을 한번 누르면 결합된 모든 모듈의 동작을 쉽게 조정할 수 있도록 하였다. 실제 동작을 검증하기 위해 두 개, 3개 및 5개의 모듈을 결합하여 자벌레 동작과 보행 로봇을 구현하여 제안된 구조와 알고리즘의 유용성을 보였다. 향 후 무선연결 방법을 보완하여 인터넷상에서 통제할 수 있는 지능화된 모듈라 로봇의 연구가 필요하다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.760-770
• /
• 2013

Detecting grammatical errors from a text is a long-history application. In this paper, we compare the performance of two grammatical error detection techniques, which are implemented as a sub-module of an automated English scoring system. One is to use a full syntactic parser, which has not only grammatical rules but also extra-grammatical rules in order to detect syntactic errors while paring. The other one is to use a finite state machine which can identify an error covering a small range of an input. In order to compare the two approaches, grammatical errors are divided into three parts; the first one is grammatical error that can be handled by both approaches, and the second one is errors that can be handled by only a full parser, and the last one is errors that can be done only in a finite state machine. By doing this, we can figure out the strength and the weakness of each approach. The evaluation results show that a full parsing approach can detect more errors than a finite state machine can, while the accuracy of the former is lower than that of the latter. We can conclude that a full parser is suitable for detecting grammatical errors with a long distance dependency, whereas a finite state machine works well on sentences with multiple grammatical errors.

• Structural Engineering and Mechanics
• /
• 제37권2호
• /
• pp.197-213
• /
• 2011

Concrete is a heterogeneous material exhibiting quasi-brittle behaviour. While homogenization of concrete is commonly accepted in general engineering applications, a detailed description of the material heterogeneity using a mesoscale model becomes desirable and even necessary for problems where drastic spatial and time variation of the stress and strain is involved, for example in the analysis of local damages under impact, shock or blast load. A mesoscale model can also assist in an investigation into the underlying mechanisms affecting the bulk material behaviour under various stress conditions. Extending from existing mesoscale model studies, where use is often made of specialized codes with limited capability in the material description and numerical solutions, this paper presents a mesoscale computational model developed under a general-purpose finite element environment. The aim is to facilitate the utilization of sophisticated material descriptions (e.g., pressure and rate dependency) and advanced numerical solvers to suit a broad range of applications, including high impulsive dynamic analysis. The whole procedure encompasses a module for the generation of concrete mesoscale structure; a process for the generation of the FE mesh, considering two alternative schemes for the interface transition zone (ITZ); and the nonlinear analysis of the mesoscale FE model with an explicit time integration approach. The development of the model and various associated computational considerations are discussed in this paper (Part 1). Further numerical studies using the mesoscale model for both quasi-static and dynamic loadings will be presented in the companion paper (Part 2).

• Korean Membrane Journal
• /
• 제3권1호
• /
• pp.17-23
• /
• 2001

Polyethersulfone (PES) and cellulose acetate (CA) ultrafiltration (UF) membranes having different molecular weight cut-off values were prepared by immersion precipitation method by changing the compositions of easting solution. Egg white solution was concentrated to volume concentration ratio 4 in tubular UF with membranes made of moderately hydrophobic PES and hydrophilic CA. The process Parameters such as pressure and fluid velocity were controlled in order to apply successfully for egg white solution and to investigate the pressure dependency. The resistance values were measured to investigate the fouling and concentration polarization effect on membrane performance. During concen- tration of egg white solution by UF, the fouling layer appeared to contribute little resistance to flux compared to that of polarized layer.

• 한국멀티미디어학회논문지
• /
• 제12권8호
• /
• pp.1120-1127
• /
• 2009

게임 산업의 급격한 성장과 사회적 영향은 그에 비례하여 게임 서비스의 취약성을 공격하는 침해사고 건수는 지속적으로 증가하고 있다. 하지만, 게임서비스 역기능 방지를 위한 차별화된 정보보안 기술연구는 아직 미진한 상태이다. 따라서 본 연구에서는 현재 서비스되고 있는 온라인 게임서비스에 대한 침해현황을 조사하고, 가장 큰 보안 취약점으로 도출된 게임서비스 위변조에 기술적 대응 방안을 설계하였다. 게임 서비스의 위변조 방지를 위하여 실행파일을 암호화하고 실시간으로 복호화하며 게임서비스 역 분석 방지를 위하여 디버깅, 디스어셈블, 자체 메모리 덤프를 방지하고 모듈 의존성에 대한 정보를 은닉하도록 하였다.

• 대한건축학회연합논문집
• /
• 제20권6호
• /
• pp.9-16
• /
• 2018

The purpose of this research was influenced by the historical background of Japanese modern architecture by the circulation of Kuma Kengo's architectural works and he wanted to look at the values and directions he was pursuing and how they were expressed in his works. The results of the review are summarized as follows. First, metabolism was developed as a reaction of modernism in modern architecture, focusing on growth through infinite reproduction by looking at architecture and cities as organisms and by using unit space as cells. Kuma Kengo, on the other hand, argues that focusing on the possibility of decimation of unit members by sequencing the elements that make up the space smaller than the unit space is closer to an ecological architecture. Second, what Kuma Kengo says is "erase the architecture" that is naturally related to the environment and disappears when its use is exhausted. His argument is expressed in individual architectural works through 'visual erase', 'particle painting of materials' and 'independence through dependency.' Through this, Kuma Kengo's ecological architectural languages were influenced by the ecological causes of metabolism, but they differed from the perspective of seeing architectural circulation as an organism. If metabolism was intended to realize circulation with growth potential based on the module of unit space, Kuma Kengo sought to implement circulation with the extinction of the unit members of space.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.70-74
• /
• 2018

In typical spectroscopic ellipsometry, the optical and geometrical properties of thin film and nano pattern can be obtained by measuring the polarization state of light reflected/transmitted from the object by rotating a analyzer or a compensator. We proposed a snapshot spectroscopic ellipsometric system based on a modified Michelson interferometer to overcome the time-consuring measurement principle due to rotating part. The proposed system provides spectral ellipsometric parameters (psi, delta) in real time by using a single spectral interference signal generated in the interferometric polarization module. However, it has a long-term stability problem resulting in delta(k) drift. In this paper, it is experimentally proved that the drift problem is caused by anisotropic refractive index change of the beam intersection layer in beam splitter of interferometer.