• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.371-372
• /
• 2008

In this paper, we consider wireless sensor networks with hard energy constraint, where each node is powered by a small battery. Under this hard constraint, reducing energy consumption is the most important design consideration for wireless sensor networks. Energy saving and control is an important issue, involved in the design of most sensor nodes. In this context, we focus on physical layer design where energy constraint problem can be modeled as an optimization of transmission modulation scheme[1]. Specifically, our analyses are based on energy control schemes that are relative to physical layer design on upper bound SEP MPSK in AWGN channels.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.41-48
• /
• 1992

The characteristics of traveling-wave electrodes for high-frequency electroptic integrated devices are described from the view point of improvement of phase-matching based on the conformal mapping method. Specific calculations of the characteristic impedance, effective microwave index, and eletrode loss for asymmetric coplanar strip(ACPS) and coplanar waveguide(CPW) electrode structures are presented as a function of the geometric electrode parameters including the electrode thickness and buffer layer thickness. 5-10(x10S0-6Tm) thick Au-ACPS electrodes were successfully fabricated by electroplating and ECR etcher. The improvement of modulation bandwidth can be theoretically observed from the combination of electrode and buffer layer thickness.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.443-449
• /
• 2015

This paper considers the physical layer security problem for a two-way vehicle-to-vehicle network, where the two source vehicles can only exchange information through an untrusted relay vehicle. The relay vehicle helps the two-way transmission but also acts as a potential eavesdropper. Each vehicle has a random velocity. By exploiting the random carrier frequency offsets (CFOs) caused by random motions, a secure double-differential two-way relay scheme is proposed. While achieving successful two-way transmission for the source vehicles, the proposed scheme guarantees a high decoding error floor at the untrusted relay vehicle. Average symbol error rate (SER) performance for the source vehicles and the untrusted relay vehicle is analyzed. Simulation results are provided to verify the proposed scheme.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.557-559
• /
• 2009

We attempted modulation of hydrogen dilution ratio to achieve both the minimal incubation layer and high deposition rate. The incubation layer thickness was estimated by transmission electron microscopy (TEM) and crystallization fraction was measured by Raman spectroscopy.

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.425-431
• /
• 2012

Utilizing the three-dimensional Snyder-Mitchell model with a PT-symmetric potential, we study the influence of PT symmetry on beam propagation in strongly nonlocal nonlinear media. The complex Coulomb potential is used as the PT-symmetric potential. A localized spatiotemporal accessible soliton solution of the model is obtained. Specific values of the modulation depth for different soliton parameters are discussed. Our results reveal that in these media the localized solitons can exist in various shapes, such as single-layer and multi-layer disk-shaped structures, as well as vortex-ring and necklace patterns.

• Current Optics and Photonics
• /
• v.8 no.4
• /
• pp.399-405
• /
• 2024

In this paper, an optical modulator based on monolayer graphene and triple-layer black phosphorus (BP) heterojunction in the optical communication band range is designed. The influences of geometric parameters, chemical potential, BP orientation and dispersion on the fundamental mode of this modulator were determined in detail by the finite-difference time-domain (FDTD) method. Using appropriate geometric parameter settings, the extinction ratio of this proposed modulator is 0.166 dB, while the modulator with a working length of 3 ㎛ can realize a 0.498 dB modulation depth. The 3-dB bandwidth of this modulator could achieve up to 2.65 GHz with 27.23 fJ/bit energy consumption. The extinction ratio and bandwidth of the proposed modulator increased by 66% and 120.83%, respectively, compared to the monolayer graphene-based ridge-type waveguide modulator. Energy consumption was reduced by 97.28%, compared to a double-layer graphene-based modulator.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.8
• /
• pp.211-218
• /
• 2022

In this paper, a computer simulation program was developed to interpret the results measured by photoreflectance spectroscopy. The developed program is implemented so that the user can easily change the factors required for optical modulation characteristic interpretation, and the result of the value can be checked simultaneously with the actual measurement result. The results obtained by photoreflectance spectroscopy are obtained by mixing a third derivative function form (TDFF) modulated around a bandgap with a Franz-Keldysh oscillation (FKO) signal due to an electric field at a surface and an interface higher than the bandgap. Through the computer simulation program, the optical characteristics that appear in the GaSb Epi layer formed as a single layer were analyzed, and very useful results were obtained by specializing in optical modulation analysis. In addition, a Fast Fourier Transform (FFT) analysis tool was added to facilitate frequency characteristics analysis of FKO.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.6
• /
• pp.49-56
• /
• 2010

In this paper, a joint PHY-MAC layer optimized resource allocation scheme for OFDMA based micro base stations is investigated. We propose cross-layer optimized two-stage resource allocation scheme including cross-layer functional description and control information flow between PHY-MAC layers. The proposed two-stage resource allocation scheme consists of a user grouping stage and a resource allocation stage. In the user grouping stage, users are divided into a macro base station user group and a micro base station user group based on the PHY-MAC layer characteristics of each user. In the resource allocation stage, a scheduling scheme and an allotment of resources are determined. In the proposed scheme, diversity and adaptive modulation and coding (AMC) schemes are exploited as schedulers. Simulation results demonstrate that the proposed scheme increases the average cell throughput about 40~80 % compared to the conventional system without micro base stations.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.259-259
• /
• 2015

Single crystalline indium-tin-oxide (ITO) nanowires (NWs) were grown by sputtering method. A thin Ni film of 5 nm was deposited before ITO sputtering. Thermal treatment forms Ni nanoparticles, which act as templates to diffuse Ni into the sputtered ITO layer to grow single crystalline ITO NWs. This Ni diffusion through an ITO NW was investigated by transmission electron microscope to observe the Ni-tip sitting on a single crystalline ITO NW. Meanwhile, a single crystalline ITO structure was found at bottom and body part of a single ITO NW without remaining of Ni atoms. This indicates the Ni atoms diffuse through the oxygen vacancies of ITO structure. Rapid thermal process (RTP) applied to generate an initial stage of a formation of Ni nanoparticles with variation in time periods to demonstrate the existence of an optimum condition to initiate ITO NW growth. Modulation in ITO sputtering condition was applied to verify the ITO NW growth or the ITO film growth. The Ni-assisted grown ITO layer has an improved electrical conductivity while maintaining a similar transmittance value to that of a single ITO layer. Electrically conductive and optically transparent nanowire-coated surface morphology would provide a great opportunity for various photoelectric devices.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.45-48
• /
• 2002

Poly(3-hexylthiophene) or P3HT based organic thin film transistor (OTFT) array was fabricated on flexible poly carbonate substrates and the electrical characteristics were investigated. As the gate dielectric, a dual layer structure of polyimide-$SiO_2$ was used to improve the roughness of $SiO_2$ surface and further enhancing the device performance and also source-drain electrodes were $O_2$ plasma treated for improvement of the electrical properties, such as drain current and field effect mobility. For the active layer, polymer semiconductor, P3HT layer was printed by contact-printing and spin-coating method. The electrical properties of OTFT devices printed by both methods were evaluated for the comparison. Based on the experiments, P3HT-based OTFT array with field effect mobility of 0.02~0.025 $cm^{2}/V{\cdot}s$ and current modulation (or $I_{on}/I_{off}$ ratio) of $10^{3}\sim10^{4}$ was fabricated.