• 제목/요약/키워드: Modular housing

검색결과 111건 처리시간 0.018초

유닛모듈 운반시 작용하중 분석 (Load analysis for transporting unit module)

  • 김균태;전영훈
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 추계 학술논문 발표대회
    • /
    • pp.200-201
    • /
    • 2015
  • The unit modular method is one in which unit modules are prefabricated at a factory and then constructed at a construction site. That is why an important process, transporting unit module, is added in this method. The purpose of this study is to analyse the load for transporting unit module. The results of the analysis of the driving experimental runs revealed that a maximum load of 15 kN was applied on adapter block type A and a maximum load of 25 kN on adapter block type B. These loads were recorded at the points in the road test when the low-bed trailer was driving through unstable sections of the test such as stopping, restarting, passing over a speed bump or taking a left turn at speed.

  • PDF

메가스포츠시설의 사후 활용을 위한 임시주거 계획 - 2018평창동계올림픽을 중심으로 - (The Planning of Temporary Housing for Post Application of Mega Sports Facilities - Focused on the 2018 Winter Olympics -)

  • 이종찬;강윤도;김병선
    • KIEAE Journal
    • /
    • 제16권4호
    • /
    • pp.41-46
    • /
    • 2016
  • Purpose: This is a study on the planning of temporary housing for post application of Mega Sports facilities. The subject of the study is 2018 Pyeongchang Winter Olympics, which is to suggest building an alternative temporary housing using shipping containers(high cube), which solve the lack of accommodations and recycle temporary housing after Olympics, save money and be eco-friendly in Olympics. Method: This study includes this ; research on the a fact-finding survey about Mega sports facilities post application and demand survey on 2018 Pyeongchang Winter Olympics accomodations and an analysis about temporary housing plan. Furthermore we decided temporary housing building plan by analyzing residents' needs and traits of the housing etc. Through this, we made a schematic design for household units. Result: As a result, this study is a plan of making space, forms, and structure. The planned size is $38.4m^2$(L:12m, W:3.2m) except balcony, and indoor height is 2.5m. The space consists of entrance, bathroom, bedroom and living room with folding furniture system. Also there's a detailed floor plan of the ceiling, wall, and floor we drew up. The ceiling and wall consist of dampproof film, noncombustible board, fire proof urethane form, and color-designed sheet. The floor is composed of floor tile, cement mortar, light concrete(with heat coil), insulation, and dampproof film. Additionally, this study is a plan of interior dry wall with detail using modular construction method for work efficiency and quality improvement.

유닛모듈 운반용 고정장치의 하중거동 비교 분석 (A comparative analysis of load behavior of the fixing equipments for transporting unit modules)

  • 김균태;김석;전영훈;김태영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2015년도 춘계 학술논문 발표대회
    • /
    • pp.146-147
    • /
    • 2015
  • This paper compares load behavior of two fixing equipments for transporting unit modules. The suggested fixing equipment shows higher limit load than an existing fixing equipment, which proves that the suggested fixing equipment have higher safety.

  • PDF

KS(한국산업규격)의 3단계분류체계를 활용한 건자재 표준화 방안 연구 (A Study on the standardization of Construction material by the use of three-tier classification system of Korean Industrial Standard)

  • 임석호
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2009년 춘계학술발표대회 논문집
    • /
    • pp.236-239
    • /
    • 2009
  • Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

  • PDF

공동주택 시공표준화를 위한 조립기준면 및 표준마무리재에 관한 연구 - 석고보드 마감재와 창호재의 접합부위를 중심으로 - (A Study on the Standard Joint Material and Reference Plane for the Standard of Construction in the Apartment - Joining Part between Gypsumboard and Windows -)

  • 임석호;박근수;이가경
    • 한국주거학회논문집
    • /
    • 제20권4호
    • /
    • pp.31-38
    • /
    • 2009
  • In our country, the application of the design method of face to face dimension in wall-slab apartment has passed 10 years. So MC(Modular Coordination) design method has fixed in the design step to some degree. In Design and Work Execution of House the exclusive area of the apartment was calculated by face to face dimension. And the term of face to face dimension was known broadly to clients, construction company, etc. But design method of face to face dimension is not to simply extend the room size so far as wall depth in design process but to ensure the actual space should be considered with efficient use and assembly of building components. That is to say, Design method of face to face dimension is not to be defined by design step but to be related with construction and maintenance. However in construction process the point of face to face design method was not understood even now. So the purpose of this study was to extract the effect and question of face to face design method in construction process by survey of actual condition of structure and construction quality, and compare this result with existing construction method. The following project of this study is to survey of actual condition of interior components such as gypsum board, windows & doors etc. Therefore this study is to induce architectural long-life through architectural standardization construction and component's exchange, and, by the subject of the study on Apartment to have design guideline and basis for joining part between Gypsumboard and windows.

한국의 공업화건축 공법 도입활용과정 분석을 통한 3D 프린팅기술 개발 방향성 연구 (Discovering Applicable Lessons for '3D Printing R/D Project' Implementation Through Studying the Process of Adopting Overseas Industrialized Building Production Technological Knowhow in the Korean Context)

  • 이성민;이필원;조후영;이재헌
    • 한국공간구조학회논문집
    • /
    • 제17권4호
    • /
    • pp.59-68
    • /
    • 2017
  • This paper aims at finding some lessons applicable to successful implementation of 'The 3D Printing R/D Project' through both examining the process of adopting overseas industrialized housing production technological knowhow by home builders during the 1970's~1980's period and thereafter until now the various efforts to adjust the technologies efficiently to the Korea's unique situation. Some meaningful lessons can be summarized as follows; I) Deep understanding of 3DP technological know-why along with its inheritance, II) Readjusting of R/D period and goals(cf. Global leader Winsun's 15 years experiment), III) Restructuring for more collaborative R/D B&E system among participating researchers IV) Fostering 3DP expert-engineers and technicians from the early stage, V) Clearing legal barriers in users' adopting 3DP methods necessary, VI) Development of appropriate building material besides concrete. Therefore, it is highly recommended that the above-mentioned 6 lessons positively accepted and applied to the Research Implementation Plan in due course, especially by KICT consortium and KAIA under the guidance of Ministry of Land, Infrastructure and Transport.

조립식 목조주택의 평면모듈 설정을 위한 연구 (A study on the floor modular establishment of the prefabricated wooden dwelling)

  • 김재덕;강만호;주석중
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2006년도 추계학술발표대회 논문집
    • /
    • pp.386-391
    • /
    • 2006
  • Though a variety of demands for an green dwelling, it is hard to diffuse a wooden house due to high construction cost. So this study aims to diffuse to propose a space modular for production and supply. Therefore the result of investigation to the space modular of each room through the survey of width and depth in the type of dwelling in korea is as follows. 1) Investigated the mixture of magnitude on the total width and depth, the survey is showed commonly 3.6m and 4.2m. 2) Once the depth is 3.6m, a living room and inner room, room's width is 3.9m, 4.5m. Once the depth is 4.2m, those width is 4.8m. 3) By use of a survey, the post distances consisted of all rooms are 3.6m, 3.9m, 4.2m, 4.5m, 4.8m. The result of investigation to possibility for mixture applied to six level types invested post modules to the wooden house of post & Beam method is as follows. 1) With the regularity of depth and simplicity of width, It is potential to compound floor plan in korea. 2) It is possible to plan an informal shape of kitchen+dining room which is a spare space available for the merit changeable space after arranged main rooms. 3) It is possible to plan a space through a variety of mixture method at bathroom. Thus, it is possible for a variety of floor formations to build a low-cost wooden house through five types of post distance.

  • PDF

목조주택 모형개발을 위한 평면모듈 설정에 대한 연구 - 기둥-보 방식 구조를 중심으로 - (A study on the Plan Modular Establishment for the Development of Wooden Dwelling Model - Focused on the Post & Beam Structure -)

  • 강만호;주석중;김재덕
    • 한국주거학회논문집
    • /
    • 제18권1호
    • /
    • pp.141-148
    • /
    • 2007
  • In this research, to develope wooden house model with post & beam structure which is commensurate with domestic environment, we analyzed the size and module of a unit space and space organization of existing habitation, then, based on the result, we tried to suggest general wood house modules. For this, we investigated 98 floor plans for 30 pyeong apartment in Seoul, Gyounggi-do, Gwangju, and Jeolla-do. The results are showed as follows. 1) It has shown that 7 posts distances are available in 2 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, and 4.8 m. 2) It has shown that 8 posts distances are available in 3 bay floor plan type - 3.0 m, 3.3 m, 3.6 m, 3.9 m, 4.2 m, 4.5 m, 4.8 m, and 5.1 m. It was concluded as follows, applying the standard of regulations of horizontal modular coordination design, from $\ulcorner$the standard of modular coordination design in architecture(KSF 1525)$\lrcorner$. 1) The available widths are 3.0 m, 3.3 m, 3.6 m, 4.2 m, and 4.8 m, and the available depths are 3.0 m, 3.3 m, 3.6 m, and 4.2 m. 2) To guarantee a space through post module of a room combination, we can use a module of 3.6 m, 4.2 m, 4.8 m except 3.0 m, 3.3 m among available modules. The module investigated in post & beam structure wooden house is applied in basic 6 floor plans as follows. 1) When organize the room on the basis of tile module of 3.6 m, 4.2 m, it was possible to organize the floor plan. 2) After arranging main room, making practical application of variableness which is advantage of post & beam structure, putting to practical use of extra space that becomes the combination of atypical room such as kitchen, dining room, and bathroom, it was possible to organize the floor plan of the residence. 3) It is possible to organize whole rooms through the plan module from 3.6 m to 4.2 m, that decides the floor plan of a wooden house.

모듈러 건축의 타워크레인 배치계획 수립을 위한 다중 최적화 모델 개발 (Multi-objective Optimization Model for Tower Crane Layout Planning in Modular Construction)

  • 윤성부;박문서;정민혁;현호상;안수호
    • 한국건설관리학회논문집
    • /
    • 제22권1호
    • /
    • pp.36-46
    • /
    • 2021
  • 최근 모듈러 건축의 고층화와 함께 현장에서의 T/C 사용도 증가하였다. 이러한 T/C의 대수, 제원 및 위치를 결정하는 TCLP는 프로젝트의 공사비용, 공사기간, 안전, 생산성에 큰 영향을 미친다. 특히 모듈러 건축 프로젝트에서 조건에 부합하지 않는 TCLP는 추가 장비 투입, 재설계 등의 작업으로 이어져 공사기간과 공사비 증가가 발생할 수 있다. 따라서 현장관리자는 현장조건, 양중대상, T/C 제원 등 수많은 제약을 고려하여 프로젝트에 적합한 TCLP를 수립해야 한다. 하지만 다중 T/C를 사용하는 건설현장의 경우 추가적인 고려사항과 변수들로 인해 경험과 직관을 통해 TCLP를 수립하는데 어려움이 있다. 이를 위해 본 연구에서는 비용과 간섭면적의 최소화를 목적으로 하는 다중 최적화(multi-objective optimization) 알고리즘을 개발하고, 이를 활용하여 T/C 대수, 제원 및 위치를 선정하는 모델을 제안한다. 본 연구에서는 기존의 단일 최적화 방식과 달리 다중 최적화를 통한 TCLP 수립 프로세스를 제안함으로써, 비용과 간섭면적의 trade-off를 고려한 경제적이고 효율적인 프로젝트 완료를 기대할 수 있음을 보여주었다.

전통한옥 '칸'의 계획과 구성에 관한 연구 (A Study on Planning and Composition of Module Unit in Korean Traditional House)

  • 김종훈
    • 한국주거학회논문집
    • /
    • 제23권4호
    • /
    • pp.41-48
    • /
    • 2012
  • The purpose of the study, approaching from the aspect of the construction technologies, is to determine the architectural techniques of traditional wood architects in existence, through which the systems and techniques that create the inherent characteristics of Korean Architecture are clarified. With understanding traditional construction system and focusing on the fact that built environment results from the consistent standards and technologies of architects, this study inquires into the systematic standard and its formation that present in the process of planning for the overall scale and shape of a building from the following (four) perspectives. The study determines the characteristics of '間(Kan)' (unit; fundamental unit that measures Korean traditional houses) and the methods of columns disposition of which the '間 (Kan)' is made up. Once the necessary spaces are decided according to the size of a building, then floor plans are drawn with the standard unit, '間(Kan)'. The '間(Kan)', as a modular unit, is not only composing the floor plans, but also functioning as an Area unit, Space unit and Structural unit. Composition of '間(Kan)' varies with disposition of columns, and therefore multiform of floor and spaces are created. In this study, the '間(Kan)', as a standard unit, is used in the form of specific size and area, and it is demonstrated how the floor plans are developed by organizing the columns in accordance with the spaces requested.