• Korean journal of applied entomology
• /
• v.9 no.2
• /
• pp.85-90
• /
• 1970

This study was conducted to find out the evidence of a sex attraction in the fall webworm moths, Hyphantria cunea D., in the fold conditions. The study dealt with the sex attraction between the sexes, selection of effective trap type, effect of moth age on the sex attractiveness, sex attractiveness after copulation, and the time of the sex attraction in the day, The trap was baited with a living moth in the cylindrical screened case 4cm. in long and 2.7cm in diameter. The traps were attached on the tree in a horizontal position at the height of about 3m. on the ground. A sex pheromone was evident in the female moth which attracted the male to the lure, and the modified sticky trap was most effective in this experiment. The trap consisted of a cylindrical powder milk can 11.5cm. in long and 10cm. in diameter with the entry hole 4.8cm, in diameter at both ends of the can, and the inside of can was lined with paper coated with acri-soil(sodium poliacrilate) to catch them. Males were mostly attracted to females during their first 2 days of life, and its attractiveness decreased with moth age, No males were attracted to females more than five days old, and no females lived for more than six days. After copulation, sexual attractiveness was decreased swiftly, Sexual attractiveness was found to be greatest between 4 and 6 A.M. Living females can be used as effective baits for luring the males to the fold trapt.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.2
• /
• pp.85-90
• /
• 1994

Attempts were made to regenerate plants from petiole explane of Forest Pimpinella barchycarpa via repetitive somatic embryogenesis. Effective induction of somatic emb교ogenesis was achieved on both MS and modified $B_{5}\;(mB_{5})$ media containing BA + 2,4-D or BA + 2,4-D + NAA under light condition (16-h photoperiod/day) cultures. The explants exposed to the ligt produced numerous somatic embryos while those kept under the dark did not form any on the same medium. Somatic embryos at different developmental stages were observed to arise within a individual explants. Plantlets could be regenerated on $mB_{5}$ basal medium or $mB_{5}$ containing 0.1 mg/L NAA Secondary adventive embryos were formed on the surface of the somatic embryos. Therefore, repetitive somatic embryogenesis could be achieved by secondary embryogenesis. Although the treatment of 2,4-D or NAA alone was effective in callus formation and growth, but not in induction of somatic embryogenesis. Some explants, cultured on NAA-containing media in darkness, produced only adventive roots. The embryogenic potential was maintained for two years when subcultured to BA and 2,4-D containing media with 5 weeks inteval. Regenerated plantlets were maintained on $mB_{5}$ or MS basal media for 4 to 6 more weeks and transferred to soil of an artificial mixture for acclimation. Most plantlets (more than 97%) survived, and grew without any deformity.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.87-98
• /
• 1990

The present Study dealt with the earthquake-resistant design of cantilever retaining walls supporting cohesionless soils. With design examples of three different types of cantilever retaining walls, the factors of safety against sliding were computed at various values of horizontal acceleration coefficient and compared with each other. The horizontal inertia effect due to the weights of concrete wall itself and a portion of backfill was taken into account in the analyses, and also Mononobe-Okabe pseudo-static solution method was modified to deal with various states different from limiting equilibrium state. From the analyses of safety against sliding, it was found that a cantilever retaining wall with sloped base was the most efficient type in earthquake resistant design. It was also found that by sloping the base, the width of the base slab could be reduced, resulting in the least volume of concrete, excavation and backfill as compared to the other types of walls. In the case of a cantilever retaining wall with sloped feel, the efficiency similar to that of a wall with sloped base could be expected under static loading as well as at relatively low level of earthquake loading. However, this efficiency became vanished with the increase of horizontal acceleration coefficient, since the rate of reduction in developed earth pressures on the heel became smaller. In addition, the design charts with different soil friction angles as well as with different earthquake resistant design criteria of safety factor against sliding were presented for the design of cantilever retaining walls sith sloped base.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.1
• /
• pp.1-16
• /
• 2020

The APEX model has been developed for assessing agricultural management efforts and their effects on soil and water at the field scale as well as more complex multi-subarea landscapes, whole farms, and watersheds. Recently, a key component of APEX application, named APEX-Paddy, has been modified for simulating water quality by considering paddy rice management practices. In this study, the performance of the APEX-Paddy model was evaluated using field data at Iksan experimental paddy sites in Korea. The discharge and pollutant load data during 2013 and 2014 were used to both manually and automatically calibrate the model. The APEX auto-calibration tool (APEX-CUTE 4.1) was used for model calibration and sensitivity analysis. Results indicate that APEX-Paddy reasonably performs in predicting runoff discharge rate and nitrogen yield. However, sediment and phosphorus yield is not correctly predicted due to the limitation of model schemes. With APEX-Paddy, the performance in reproducing the discharge and nitrogen yield is found to be a satisfactory level after manual calibration. The manually calibrated model performed better than the automatically calibrated model in nearly all comparisons. For runoff, manual calibration reduced PBIAS while R² and NSE values of the automatically calibrated model were the same as the manual calibration. For T-N, NSE and PBIAS were reduced when using manual calibration, whereas R² value was the same as manual calibration. The limitation of the APEX-Paddy model for predicting sediment, as well as the phosphorous yield, was discussed in this study.

• Korean Journal of Medicinal Crop Science
• /
• v.28 no.2
• /
• pp.152-166
• /
• 2020

Background: Ginsenosides, which have various physiological activities, are known to be abundant in the leaves and roots of ginseng. Ginseng sprouts can be used as a fresh vegetable and roots, stems, and leaves of ginseng can be consumed. This study aimed to investigate the effect of carbon dioxide treatment and the modified atmosphere (MA) packaging method in suppressing quality deterioration during the distribution of ginseng sprouts. Methods and Results: Ginseng sprouts were packed using Styrofoam, barrier film + non gas treatment, barrier film + gas treatment, 15 ㎛ polyamide (PA) double film + non gas treatment, 15 ㎛ PA double film + gas treatment, 25 ㎛ PA film + non gas treatment, or 25 ㎛ PA film + gas treatment. Quality parameters including gas composition, relative humidity, chlorophyll SPAD (Soil Plant Analysis Development) value, firmness, and rate of quality loss in ginseng sprouts were monitored at the following temperatures: 20℃, and 10℃. Ginseng sprouts packaged with 25 ㎛ PA film showed loss in quality because of wilting owing to low relative humidity within the film. Chlorophyll and firmness did not differ between film and gas treatments. The time point at which the combined loss from softening and decay owing to fungal, and bacterial infection and wilt reached 20% was considered the limit of distribution. At 20℃, the packaging not included in the 20% distribution loss rate limit or up to 7 days was 15 ㎛ PA double film + gas treatment. At 10℃, the packaging not included in the 20% distribution loss rate limit for up to 18 days were barrier film + gas treatment and 15 ㎛ PA double film + gas treatment. Conclusions: The film packaging suitable for the distribution of ginseng sprouts was found to be the barrier film and PA film with low gas permeability and maintaining hygroscopicity at 95% relative humidity. To prevent the loss in quality of ginseng sprouts, gas treatment (8% of O₂ and 18% of CO₂) in the film was found to be more suitable than no gas treatment for inhibition of decay.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.507-519
• /
• 2013

This study is to evaluate agricultural water supply capacity in Geum river basin (9,865 $km^2$), one of the 5 big river basin of South Korea using MODSIM-DSS (MODified SIMyld-Decision Support System) model. The model is a generalized river basin decision support system and network flow model developed at Colorado State University designed specifically to meet the growing demands and pressures on river basin management. The model was established by dividing the basin into 14 subbasins and the irrigation facilities viz. agricultural reservoirs, pumping stations, diversions, culverts and groundwater wells were grouped and networked within each subbasin and networked between subbasins including municipal and industrial water supplies. To prepare the inflows to agricultural reservoirs and multipurpose dams, the Soil and Water Assessment Tool (SWAT) was calibrated using 6 years (2005-2010) observed dam inflow and storage data. By MODSIM run for 8 years from 2004 to 2011, the agricultural water shortage had occurred during the drought years of 2006, 2008, and 2009. The agricultural water shortage could be calculated as 282 $10^6m^3$, 286 $10^6m^3$, and 329 $10^6m^3$ respectively.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1415-1419
• /
• 1998

In order to evaluate the safety of greenhouse horticultures, a large number sample sources were collected, and the fungi of Aspergillus sp. and Penicillium sp. were isolated from them. Indirect competitive ELISA method and high performance liquid chromatography (HPLC) were applied to confirm the ochratoxin A producing abilities of isolated strains. One hundred ninety two sample sources including soil, pepper, strawberry and water mellon were collected for fungi isolation from western Gyeongnam, Andong and Gyeongbok. One hundred forty two strains of Aspergillus sp. and one hundred fifty three strains of Penicillium sp. were isolated respectively from them. The isolated fungi were tested for the production of ochratoxin A by ELISA. After culture of them on the modified sucrose low salt medium at $28^{\circ}C$ for 15 days, we found that five strains of Penicillium sp. produced ochratoxin A at the levels of $0.084{\sim}2.128\;{\mu}g/mL$. Among them, #129-2 strain isolated from water melon, showed the highest level of ochratoxin A as $2.128\;{\mu}g/mL$ broth. However, all of isolated Aspergillus sp. didn't produce ochratoxin A. When we compared the results of ELISA method with HPLC method, ochratoxin A production of each isolated strains showed very similar levels.

• Economic and Environmental Geology
• /
• v.29 no.6
• /
• pp.699-712
• /
• 1996

Field scale experiments using an automated 144-channel TDR system were conducted which monitored the movement of solute through unsaturated loamy soils. The experiments were carried out on two different field plots of 0.54 ha to study the vertical movement of solute plume created by applying a square pulse of $CaCl_2$ as a tracer. The residence concentration was monitored at 24 locations on a transect and 5 depths per location by horizontally-positioning 50 cm long triple wire TDR probes to study the heterogeneity of solute travel times and the governing transport concept at field scale. This paper describes details of experimental methodology and calibration aspects of the TDR system. Three different calibration methods for estimation of solute concentration from TDR-measured bulk soil electrical conductivity were used for each field site. Data analysis of mean breakthrough curves (BTCs) and parameters estimated using the convection-dispersion model (CDE) and the convective-lognormal transfer function model (CLT) reveals that the automated TDR system is a viable technique to study the field scale solute transport providing a normal distribution of resident concentration in a high resolution of time series, and that calibration method does not significantly affect both the shape of BTC and the parameters related to the peak travel time. Among the calibration methods, the simple linear model (SLM), a modified version of Rhoades' model, appears to be promising in the calibration of horizontally-positioned TDR probes at field condition.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.759-767
• /
• 2017

Two main parameters of NRCS-CN method are curve numbers and intial loss ratio. They are generally selected according to the guideline of US National Engineering Handbook, however, they might cause errors on estimated runoff in Korea because there are differences between soil types and hydrological characteristics of Korean watersheds and those of United States. In this study, applying asymptotic CN regression method, we suggested eight modified NRCS-CN models to decide optimum runoff estimation model for Korean watersheds. RSR (RMSE-observations standard deviation ratio) and NSE (Nash-Sutcliffe efficiency) were used to evaluate model performance, consequently M6 for gauged basins (Avg. RSR was 0.76, Avg. NSE was 0.39) and M7 for ungauged basins (Avg. RSR was 0.82, Avg. NSE was 0.31) were selected. Furthermore it was observed that initial loss ratios ranging from 0.01 to 0.10 were more adequate than the fixed ${\lambda}=0.20$ in most of basins.

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.459-462
• /
• 2009

'Fuyu' (Diospyros kaki L.) is an important sweet persimmon cultivar, and the fruits are often stored in a modified atmosphere after harvesting in South Korea. However, blossom-end browning and darkening of fruit often occur after harvest or during storage, which decreases fruit quality in the fresh fruit market. High fruit calcium concentration would reduce oxidation of phenolic compounds in the cytoplasm such oxidation is responsible for fruit browning. This study investigated the effects of soluble calcium fertilization and foliar application, and indole-3-butyric acid (IBA) fertilization on fruit quality and browning. Trees received one of the following five treatments: 1) control (no calcium or IBA); 2) calcium fertilization (Ca FG, 2 mL per tree); 3) calcium foliar application (Ca FA, 2 mL); 4) calcium and IBA fertilization (Ca+IBA) 5) IBA fertilization (IBA, 2 mL. Fruit calcium concentration was highest in trees treated by Ca FA, and lowest in control trees. Generally, fruit calcium concentration was high in the stem end but low in the blossom end, which usually first develops fruit-browning symptoms. There were no apparent differences in fruit qualities such as firmness, soluble solid content, and weight among treatments. Fruit browning occurred at frequencies of about 14%, 20%, and 50% on Ca FA, Ca FG, and control trees, respectively. Therefore, the improved fruit calcium level seen when trees received Ca or IBA application tended to prevent fruit browning, which increased fruit quality and storage properties.