• 제목/요약/키워드: Modified branch exchange

검색결과 4건 처리시간 0.011초

개선된 선로교환 기법을 이용한 방사상 전력계통의 최적 라우팅 알고리즘의 적용 (An Application of the Optimal Routing Algorithm for Radial Power System using Improved Branch Exchange Technique)

  • 김병섭;신중린;박종배
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제51권6호
    • /
    • pp.302-310
    • /
    • 2002
  • This paper presents an application of a improved branch exchange (IBE) algorithm with a tie branch power (TBP) flow equation to solve the Optimal Routing problem for operation of a radial Power system including power distribution system. The main objective of the Optimal Routing problem usually is to minimize the network real power loss and to improve the voltage profile in the network. The new BE algorithm adopts newly designed methods which are composed by decision method of maximum loss reduction and new index of loss exchange in loop network Thus, the proposed algorithm in this paper can search the optimal topological structures of distribution feeders by changing the open/closed states of the sectionalizing and tie switches. The proposed algorithm has been evaluated with the practical IEEE 32, 69 bus test systems and KEPCO 148 bus test system to show favorable performance gained.

블루투스 저전력 시스템을 위한 저복잡도 결합 비터비 검출 및 복호 알고리즘의 하드웨어 설계 및 구현 (Hardware Design and Implementation of Joint Viterbi Detection and Decoding Algorithm for Bluetooth Low Energy Systems)

  • 박철현;정용철;정윤호
    • 전기전자학회논문지
    • /
    • 제24권3호
    • /
    • pp.838-844
    • /
    • 2020
  • 본 논문에서는 검출과 복호가 결합된 효율적인 비터비 알고리즘 (joint Viterbi detection and decoding (JVDD))의 저복잡도 하드웨어 설계 및 구현 결과를 제시한다. 길쌈부호화된 GMSK 신호가 BLE 5.0 표준으로 채택 되어있으므로 검출과 복호를 위해 두개의 비터비 프로세서가 필요하다. 그러나, 제안된 JVDD 알고리즘은 GMSK에 의해서 유발된 심볼간의 간섭정보(ISI : inter-symbol interference)가 반영된 가지 메트릭 (branch metric)을 사용하여 단지 하나의 비터비 만을 사용하여도 검출과 복호 수행이 가능하며, 성능 저하 없이 복잡도 감소가 가능하다. JVDD 알고리즘을 적용한 BLE 비터비 복호기의 하드웨어 구현을 위해 효율적인 구조 설계가 수행되었다. 제안된 구조는 1 클럭 사이클 동안 복호를 완료할 수 있기 때문에 저지연 및 저면적 구현이 가능하다. 제안된 비터비 복호기는 Verilog-HDL을 이용하여 RTL 설계되었고, GF 55nm 공정을 활용하여 논리합성 및 구현되었다. 합성결과 12K 게이트 수를 포함하였으며 메모리 유닛 및 초기 지연시간은 MSE (modified state exchange) 대비 33% 감소 가능함을 확인하였다.

한국의 동계한냉지역에 있어서 초지개발과 조사료 공급의 활성화에 필요한 요인 (Factors Required to Sustain Pastoral Farming Systems and Forage Supply In Winter-Cold Zones in Korea)

  • 김동암
    • 한국초지조사료학회지
    • /
    • 제12권3호
    • /
    • pp.30-40
    • /
    • 1992
  • The area of grassland established and the arable land in forage production have been decreased recently in Korea. As a result, forages available from the grassland and the arable land provided only 40% of the total roughage consumed by cattle in 1991, compared with 54% in 1989. The decreasing trend of the forage production has been impinged on by a number of legislative. socio-economic. technical and other constraints negatively affecting grassland and forage development. Consequently. effective systems and strategies are quite necessary to have sustainable grassland farming in Korea. In spring and autumn, temperatures are too low for subtropical forage crops, and the summer monsoon climate is another serious limitation to the use of cool-season species. Therefore it is an imperative that not only the research-based grassland development but also the forage crop production should be strongly supported by the government authorities to overcome such climatic limitations. Private forest land holdings are of relatively small units in Korea. Accordingly. it is necessary and important to enlarge the forest land holdings per farm to develop as economic units of grassland. For this the government should introduce new policy measures such as for example: long-term leases of Sorest land and the idle arable land of absentee owners ; rational rental system of national and public forest lands; integrating livestock and forest production. All the laws and regulations standing in the way of the grassland development in forest lands should be modified and revised to open the way for much easier development of grassland. It is also proposed that a high level of financial incentives -hould be provided for structural improvements for the grassland development. They may be: mechanization facilitation, construction of new roads relating to grassland, and land exchange and consolidation. And it is basically necessary that financial enumeration or profits must be garanteed in order to motivate farmers to keep up farming continuously. For more efficient grassland development in mountainous areas, reorganization of Alpine Experiment Station and NAB1 Namwon Branch Station may be needed. Research should be strengthened for completion of pasture mixtures, development of maximum forage production methods with a view to saving labor and reducing production costs, introduction of grazing and forage conservation techniques. and utilization of rice straw as more palatable and nutritious forage source. In order to have more efficient and effective transfer of advanced forage production technologies to livestock farmers the user-clients. it is also essential that special training measures should be given to livestock farmers through making greater use of specialized research and extension workers.

  • PDF

양이온 교환 및 염 함침을 통한 메조다공성 실리카와 유기-금속 구조체의 수분 흡착 특성 조절 (Control of Water-Adsorption Properties of Mesoporous Silica and MOF by Ion Exchange and Salt Impregnation)

  • 이은경;조강희;김상겸;임종성;김종남
    • 청정기술
    • /
    • 제24권1호
    • /
    • pp.55-62
    • /
    • 2018
  • $90^{\circ}C$ 이하의 저온열원 구동 수분 흡착식 냉방 시스템에 사용되는 흡착제는 효과적인 냉열 생산을 위해서 상대습도($P/P_0$) 0.1 ~ 0.3에서 높은 수분 흡-탈착량 차를 보이는 것이 좋다. 메조다공성 실리카(MCM-41)와 다공성 유기-금속 구조체(MIL-101) 의 경우 최대 수분 흡착량은 많지만 상대습도($P/P_0$) 0.1 ~ 0.3 구간에서 각각 $0.027{g_{water}\;g_{ads}}^{-1}$, $0.074{g_{water}\;g_{ads}}^{-1}$의 낮은 수분 흡-탈착량 차를 갖는다. 이 연구에서는 메조다공성 실리카와 다공성 유기-금속 구조체의 표면 성질을 조절하여 상대습도($P/P_0$) 0.1 ~ 0.3에서 수분 흡-탈착량 차를 증가시켰다. 주로 수분 흡착이 상대습도($P/P_0$) 0.5 ~ 0.7에서 일어나는 메조 다공성 실리카의 경우 알루미늄을 관능화 시킨 후에 염기도가 다른 여러 양이온($Na^+$, ${NH_4}^+$, $(C_2H_5)_4N^+$)들로 교환하거나 염($CaCl_2$)을 20 wt% 함침하여 각각의 흡착제들에 대해 $35^{\circ}C$에서 수분 흡착 등온선을 측정하였다. 양이온 교환 후 수분 흡착이 주로 일어나는 구간이 상대습도($P/P_0$) 0.5 부근으로 이동하였으나 여전히 상대습도($P/P_0$) 0.1 ~ 0.3에서 낮은 수분 흡-탈착량 차를 보였다. 하지만 흡습성을 갖는 염($CaCl_2$)을 20 wt% 함침한 메조다공성 실리카는 상대습도($P/P_0$) 0.1 ~ 0.3에서 수분 흡-탈착량 차가 $0.027{g_{water}\;g_{ads}}^{-1}$에서 $0.152{g_{water}\;g_{ads}}^{-1}$으로 증가하였다. 수분 흡착이 상대습도($P/P_0$) 0.3 ~ 0.5에서 주로 일어나는 다공성 유기-금속 구조체에도 염($CaCl_2$)을 20 wt% 함침하였더니 상대습도($P/P_0$) 0.1 ~ 0.3에서 수분 흡-탈착량 차가 $0.330{g_{water}\;g_{ads}}^{-1}$까지 증가하였다.