• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.6
• /
• pp.302-310
• /
• 2002

This paper presents an application of a improved branch exchange (IBE) algorithm with a tie branch power (TBP) flow equation to solve the Optimal Routing problem for operation of a radial Power system including power distribution system. The main objective of the Optimal Routing problem usually is to minimize the network real power loss and to improve the voltage profile in the network. The new BE algorithm adopts newly designed methods which are composed by decision method of maximum loss reduction and new index of loss exchange in loop network Thus, the proposed algorithm in this paper can search the optimal topological structures of distribution feeders by changing the open/closed states of the sectionalizing and tie switches. The proposed algorithm has been evaluated with the practical IEEE 32, 69 bus test systems and KEPCO 148 bus test system to show favorable performance gained.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.838-844
• /
• 2020

In this paper, we propose an efficient Viterbi processor using Joint Viterbi detection and decoding (JVDD) algorithm for a for bluetooth low energy (BLE) system. Since the convolutional coded Gaussian minimum-shift keying (GMSK) signal is specified in the BLE 5.0 standard, two Viterbi processors are needed for detection and decoding. However, the proposed JVDD scheme uses only one Viterbi processor by modifying the branch metric with inter-symbol interference information from GMSK modulation; therefore, the hardware complexity can be significantly reduced without performance degradation. Low-latency and low-complexity hardware architecture for the proposed JVDD algorithm was proposed, which makes Viterbi decoding completed within one clock cycle. Viterbi Processor RTL synthesis results on a GF55nm process show that the gate count is 12K and the memory unit and the initial latency is reduced by 33% compared to the modified state exchange (MSE).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.3
• /
• pp.30-40
• /
• 1992

The area of grassland established and the arable land in forage production have been decreased recently in Korea. As a result, forages available from the grassland and the arable land provided only 40% of the total roughage consumed by cattle in 1991, compared with 54% in 1989. The decreasing trend of the forage production has been impinged on by a number of legislative. socio-economic. technical and other constraints negatively affecting grassland and forage development. Consequently. effective systems and strategies are quite necessary to have sustainable grassland farming in Korea. In spring and autumn, temperatures are too low for subtropical forage crops, and the summer monsoon climate is another serious limitation to the use of cool-season species. Therefore it is an imperative that not only the research-based grassland development but also the forage crop production should be strongly supported by the government authorities to overcome such climatic limitations. Private forest land holdings are of relatively small units in Korea. Accordingly. it is necessary and important to enlarge the forest land holdings per farm to develop as economic units of grassland. For this the government should introduce new policy measures such as for example: long-term leases of Sorest land and the idle arable land of absentee owners ; rational rental system of national and public forest lands; integrating livestock and forest production. All the laws and regulations standing in the way of the grassland development in forest lands should be modified and revised to open the way for much easier development of grassland. It is also proposed that a high level of financial incentives -hould be provided for structural improvements for the grassland development. They may be: mechanization facilitation, construction of new roads relating to grassland, and land exchange and consolidation. And it is basically necessary that financial enumeration or profits must be garanteed in order to motivate farmers to keep up farming continuously. For more efficient grassland development in mountainous areas, reorganization of Alpine Experiment Station and NAB1 Namwon Branch Station may be needed. Research should be strengthened for completion of pasture mixtures, development of maximum forage production methods with a view to saving labor and reducing production costs, introduction of grazing and forage conservation techniques. and utilization of rice straw as more palatable and nutritious forage source. In order to have more efficient and effective transfer of advanced forage production technologies to livestock farmers the user-clients. it is also essential that special training measures should be given to livestock farmers through making greater use of specialized research and extension workers.

• Clean Technology
• /
• v.24 no.1
• /
• pp.55-62
• /
• 2018

The adsorbent used in water-adsorption cooling system utilizing low-temperature heat of below $90^{\circ}C$ is required to exhibit high water uptake capacity at a relative humidity ($P/P_0$) between 0.1 and 0.3. Mesoporous silica (MCM-41) and MOF(MIL-101) exhibit quite large water adsorption capacity under saturated water vapor at $35^{\circ}C$. However, these adsorbents show small water adsorption capacity ($0.027{g_{water}\;g_{ads}}^{-1}$, $0.074{g_{water}\;g_{ads}}^{-1}$, respectively) in the relative humidity ($P/P_0$) range of 0.1 to 0.3. In this study, the surface properties of mesoporous silica and MOF were modified by simple methods to develop an adsorbent having a higher water uptake than the conventional water adsorbents at a relative humidity ($P/P_0$) of 0.1 ~ 0.3. In the case of mesoporous silica (MCM-41) exhibiting mainly water adsorption at $P/P_0=0.5{\sim}0.7$, aluminum species was functionalized on the mesopore walls and then cations existing near the aluminum were exchanged with various cations (e.g., $Na^+$, ${NH_4}^+$, and $(C_2H_5)_4N^+$). In addition, 20 wt% (to total weight of the composites) of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MCM-41. In the case of the MIL-101 (MOF), 20 wt% of hygroscopic inorganic salt ($CaCl_2$) was impregnated on the MIL-101. The MCM-41 which was ion-exchanged with various cations has main adsorption branch around 0.5 of $P/P_0$ which was slightly shifted with low-pressure direction in comparison with pristine MCM-41. However, tiny increases were observed on the adsorption in the range of $P/P_0$ between 0.1 and 0.3. After salt impregnation on the MCM-41, the adsorption capacity under $P/P_0=0.1{\sim}0.3$ at $35^{\circ}C$ was increased from $0.027{g_{water}\;g_{ads}}^{-1}$ to $0.152{g_{water}\;g_{ads}}^{-1}$. In the case of MIL-101, the amount of water adsorption at $35^{\circ}C$ under $P/P_0=0.1{\sim}0.3$ was increased from $0.074{g_{water}\;g_{ads}}^{-1}$ to $0.330{g_{water}\;g_{ads}}^{-1}$ after the salt impregnation.