• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.90-96
• /
• 1995

In general, natural gas engine converted from gasoline engine has disadvantage of power decrease. In order to increase power output in natural gas engine, the improvement of in-cylinder flow motion has been believed as the most effective method. In this study, the geometry of combustion chamber in 4 valve DOHC natural gas engine is modified, and in-cylinder flow patterns is analyized. Also engine performance is evaluated according to the modification of in-cylinder flow motion.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.9-12
• /
• 2008

For the large-sized and post-ultra definition TFT-LCD, improved drivability is prerequisite not only for the integration of driving circuit on glass but also for the chargeability of each pixel. In order to meet required drivability, currently adopted process architecture and materials are modified for the RC delay reduction, including the drastic increase of gate bus thickness and its related solution for step coverage. We present new process architecture and material selection for the next generation TFT-LCD devices.

• 음성과학
• /
• 제4권2호
• /
• pp.5-15
• /
• 1998

This paper proposes a speech state-dependent spectral subtraction method to regulate the blind spectral subtraction for improved enhancement. In the proposed method, a modified subtraction rule is applied over the speech selectively contingent to the speech state being voiced or unvoiced, in an effort to incorporate the acoustic characteristics of phonemes. In particular, the objective of the proposed method is to remedy the subtraction induced signal distortion attained by two state-dependent procedures, spectrum sharpening and minimum spectral bound. In order to remove the residual noise, the proposed method employs a procedure utilizing the masking effect. Proposed spectral subtraction including state-dependent subtraction and residual noise reduction using the masking threshold shows effectiveness in compensation of spectral distortion in the unvoiced region and residual noise reduction.

• 한국컴퓨터정보학회논문지
• /
• 제4권4호
• /
• pp.34-39
• /
• 1999

본 논문에서는 이진 영상에서 경계에 발생하는 잡영을 효율적으로 제거하고 형상을 단순화시켜 윤곽선을 추출할 수 있는 방법을 제안하였다. 제안된 방법은 이진 영상에서 영역의 윤곽선을 구하는 기존의 $2{times}2$ 마스크 사용 방법을 일부 수정하여 한 픽셀 두께의 잡영을 효율적으로 제거할 수 있도록 하였다. 이를 위해 영역 경계의 잡영에서는 윤곽선 추적 경로가 중복되는 특성과 잡영의 끝점에서의 추적 특성을 분석하여 이용하였다. 또한 흰색 바탕을 윤곽선 추출에 활용함으로써 본래의 형상을 유지하며 효과적으로 단순화된 윤곽선 추출 결과를 얻을 수 있도록 하였다. 제안된 방법은 다양한 실험을 통해 그 효용성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2257-2259
• /
• 2000

This paper reports on the design, fabrication and driving experiment of micro mirror array(MMA) for lithography process to apply to biochip fabrication Photolithography technology is applied to activate specific area on the surface of modified glass surface, DNA monomers are bound on the activated area of the glass surface. After repeat of DNA monomer synthesizing process, DNA single strand probes could be solid-synthesized on the glass substrate. Without using photomask, photolithography process is tried using micro mirror array(MMA). Photomask or mask alignment is not required in maskless photolithography process using micro mirror array.

• 전자공학회논문지A
• /
• 제29A권7호
• /
• pp.48-55
• /
• 1992

In this paper, fSDF/POF, BPOF spatial matched filters are designed and implemented by CGH. The correlation characteristics for the suggested filters are analyzed for the distorted input images. Input patterns are obtained from the out-of-plane aircraft images by gradually rotating it, and then used for SDF training images. Modified version of LCD is used for a real-time input device of an optical correlator, and CGH-based fSDF filters are fabricated on film mask for spatial matched filter in order to recognize the distorted images. Total optical corrlator system size is effectively reduced to 148.8 cm by using lens combinations. Computer simulations and experimental results show that the suggested phase filters have nearly uniform correlation characteristics and have good classification capabilities between two classes.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.91-95
• /
• 1998

Selectivity of SiC deposition on a Si substrate partially covered with a masking material was investigated by introducing HCl gas into hexamethyldisilane/H2 gas system during the deposition. the schedule of the precursor and HCl gas flows was modified so that the selectivity of SiC deposition between a Si substrate and a mask material should be improved. It was confirmed that the selectivity of SiC deposition was improved by introducing HCl gas. Also, the pulse gas flow technique was effective to enhance the selectivity.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.155-163
• /
• 2021

We propose a novel optical encryption scheme for cipher-feedback-block (CFB) mode, capable of encrypting two-dimensional (2D) page data with the use of two-step phase-shifting digital interferometry utilizing orthogonal polarization, in which the CFB algorithm is modified into an optical method to enhance security. The encryption is performed in the Fourier domain to record interferograms on charge-coupled devices (CCD)s with 256 quantized gray levels. A page of plaintext is encrypted into digital interferograms of ciphertexts, which are transmitted over a digital information network and then can be decrypted by digital computation according to the given CFB algorithm. The encryption key used in the decryption procedure and the plaintext are reconstructed by dual phase-shifting interferometry, providing high security in the cryptosystem. Also, each plaintext is sequentially encrypted using different encryption keys. The random-phase mask attached to the plaintext provides resistance against possible attacks. The feasibility and reliability of the proposed CFB method are verified and analyzed with numerical simulations.

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.43-52
• /
• 2017

In this paper, for the first time, the electroanalytical study of Triethylenediamine, TEDA was done on a typically graphene modified carbon paste electrode (Gr/CPE) in pH=10.5 of phosphate buffer solutions (PBS). The surface morphology of the bare and modified electrodes was characterized by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The electro-oxidation of TEDA was investigated at the surface of modified electrode. The results revealed that the oxidation peak current of TEDA at the surface of Gr/CPE is 2.70 times than that shown at bare-CPE. A linear calibration plot was observed in the range of 1.0 to 202.0 ppm. In this way, the detection limit was found to be 0.18 ppm. The method was then successfully applied to determination of TEDA in aqueous samples obtained from two kinds of activated carbon from the masks of war. On the other hand, density functional theory (DFT) method at B3LYP/6-311++G** level of theory and a conductor-like Polarizable Continuum Model (CPCM) was used to calculate the $pK_a$ values of TEDA. The energies of lowest unoccupied molecular orbital ($E_{LUMO}$) and highest occupied molecular orbital ($E_{HOMO}$), gap energy (${\Delta}E$) and some thermodynamic parameters such as Gibbs free energy of TEDA and its conjugate acid ($HT^+$) were calculated. The results of calculated $pK_a$ were found to be in good agreement with the experimental values.

• 한국정보통신학회논문지
• /
• 제20권4호
• /
• pp.840-846
• /
• 2016

최근, 디지털 영상처리 장치에 대한 수요가 급격히 증대되면서 영상의 우수한 화질이 요구되고 있다. 그러나 디지털 영상을 획득, 처리, 전송하는 과정에서 여러 외부 원인에 의해 영상의 열화가 발생되며, 영상 열화의 주된 원인은 잡음에 의한 것으로 알려져 있다. 영상에 첨가되는 잡음에는 다양한 종류가 있으며 AWGN이 대표적이다. 따라서 본 논문에서는 AWGN 환경에서 국부 마스크의 표준편차를 적용한 임계값을 사용하여, 그 값에 따라 서로 다르게 처리하는 평균필터 알고리즘을 제안하였다. 시뮬레이션 결과, 제안한 알고리즘은 AWGN(${\sigma}=15$)인 Baboon 영상에서 24.56[dB]의 높은 PSNR을 보이고 있고, 기존의 MF, CWMF, AWMF에 비해 각각 3.34[dB], 2.57[dB], 3.32[dB] 개선되었다.