• International Journal of Air-Conditioning and Refrigeration
• /
• v.11 no.4
• /
• pp.178-187
• /
• 2003

In this study, ventilation flow rate and pressure rise through a tunnel are simulated numerically using computational fluid dynamics (CFD) for various conditions such as roughness height of the surface of tunnel, swirl angle and hub/tip ratio of jet fan, and entrance and exit effects. By using a modified wall function, friction factor can be predicted with respect to the Moody chart within 10% of error for the circular pipe flow and 15% for the present tunnel. For more accurate design, the effect of the swirl angle and hub/tip ratio of jet fan, which is not included in the theoretical equation of pressure rise by jet fan needs to be considered.

• Journal of Korean Society on Water Environment
• /
• v.24 no.5
• /
• pp.618-625
• /
• 2008

Advanced Phase Isolation Ditch (APID) process was studied to develop economic retrofitting technology, for the plants where retrofitting of common activated sludge process is required. In this study, to evaluate the effluent BOD, SS, T-N, and T-P concentrations as process capable and stable parameters for treating municipal wastewater, a demonstration plant was installed and operated in the existing sewage treatment plant of P city. During this study, the average effluent BOD, SS, T-N, and T-P concentrations were 4.56, 5.20, 9.30, and 1.75 mg/L at the conventional mode and 3.95, 3.17, 7.65, and 1.18 mg/L at the modified mode. The modified mode (BOD: 3.69, SS: 3.19, T-N: 1.27, and T-P: 0.69) increased the process capability more than the conventional mode (BOD: 1.80, SS: 1.05, T-N: 2.17, and T-P: 0.15) in this study. If process capability over 1.0, this process is capable and stable to treat wastewater. Therefore, newly developed APID process with modified intermittent aeration mode can be one of the useful processes for stable organic matter and nutrients removal.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.32-33
• /
• 2013

In the past, the scenario of VTS simulator was made by instructor's manual operation using waypoint definition of target ship. but in this study, we use automatic scenario creation technology with AIS data and Port-MIS data. The created VTS simaulator scenario also can be modified, added, and saved by instructor's manual operation. VTS simulator display target ship on the Electronic Navigation Chart based on S-57 format. A instructor can easily open this scenario and start, pause, stop operation wirth VTS simulator. A new modification also can be applied immediately to current scenario and can be saved new scenario file. VTS simulator using this technology can create many scenarios for a specific purpose and can be easily used for various application fields.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.140-152
• /
• 2016

It is very important for the competitiveness and sustainable management of enterprises that the rapid changes in the managerial environments quickly and accurately are responded. For example, the large-scale investment accompanied by bad alternatives in accordance with misunderstanding of the managerial environments yields the huge cost and effort to modify and improve. In firm management, the quality of products and the productivity are influenced by changes of the endogenous factors yielded in manufacturing process and the exogenous factors as market, etc. These changes include not only changes in 4M (man, machine, material, method) but also those in the market, competitors, and technologies in the process of commodification, i.e., first, such disturbances make dispersion of the process big and odd. By Shewhart chart it can be checked that the process monitored is control-in or out. Business administration executes activities for input stabilization by monitoring changes in 4Ms, comparing with the standards, and taking measures for any abnormality. Second, TRM (technology road map) is to prospect product deployment and technological trend by predicting technologies in the competitive environment as the market, and to suggest the future directions of business. So, TRM must be modified and improved according to DR (design review) stages and changes in mass-production like input material change. Therefore, a role of TRM in input stabilization for reducing cost and man-hour is important. This study purposed to suggest that the environment changes are classified into endogenous factors and exogenous factors in production process, and then, quality and productivity should be stabilized efficiently through connection between TRM and input stabilization, and to prove that it is more effective for the display industry to connect TRM with input stabilization rather than to use TRM separately.

• YAKHAK HOEJI
• /
• v.36 no.2
• /
• pp.159-166
• /
• 1992

A neoglycolipid, N-stearyl lactobionamide(N-SLBA) was synthesized and the incorporation of the neoglycolipid into liposomes was achieved in order to prepare neo-galactosylated liposome as potential drug carrier for active targeting to galactose receptor existing cell and tissue. N-SLBA was synthesized by the covalent linkage between carboxyl group of lactobionic acid and amino group of stearylamine(SA). The yield of N-SLBA was about 52.3%. It was identified with $1650\;cm^{-1}$ in IR chart, 7.5 ppm in NMR spectra, $61^{\circ}C$ endothermic peak in DSC heating curve. Surface-modified large unilamellar vesicle with galactose(N-SLBA-LUV) could be prepared with N-SLBA by reverse evaporation method. N-SLBA-LUV was identified by TEM and measuring of membrane function. The maximum amount of N-SLBA incorporated into liposome is up to about 15 mol%. Compared with control liposome (SA-LUV), N-SLBA-LUV showed lower encapsulation efficiency of MTX. It might due to the loss of positive surface charge of stearylamine. N-SLBA-LUV was similar to SA-LUV in aspect of osmotic behavior. N-SLBA-LUV prepared with N-SLBA would be expected to be a good carrier for active targeting to galactose receptor existing cell and tissue.

• Clinical and Experimental Pediatrics
• /
• v.51 no.1
• /
• pp.26-32
• /
• 2008

Purpose : This study was to provide the methods of developing the growth charts and the blood pressure nomogram among Korean children and adolescents. Methods : The growth charts were developed based on the data from the national growth surveys for children and adolescents in 1998 and 2005. The percentile charts were developed through two stages. At the first stage, the selected empirical charts were smoothed through several fitting procedures including parametric and non-parametric methods. At the second stage, a modified LMS (lambda, mu, sigma) statistical procedure was applied to the smoothed percentile charts. The LMS procedure allowed to estimate any percentile and to calculate standard deviation units and z-scores. The charts for weight-for-age, height-for-age, BMI-for-age, weight-for-height and head circumference-for-age were developed by sex. Age and normalized height controlled sex-specific nomograms of systolic and diastolic blood pressure were developed by a fixed effect model of general regression using the data from 2005 national growth survey. Results : The significant systemic differences between the percentiles of growth charts and the empirical data were not found. The final output of the study is available from Korean Center for Disease Control and Prevention homepage, http://www.cdc.go.kr/webcdc/. Blood Pressure nomogram was tabulated by height percentiles and age using the regression coefficients analyzed with regression model. Conclusion : 2007 growth charts and blood pressure nomogram were the first products based on the statistical modeling using the national survey data. The further study on the methodology including data collection, data cleaning and statistical modeling for representative growth charts would be needed.