• 한국지진공학회논문집
• /
• 제16권5호
• /
• pp.13-21
• /
• 2012

본 논문에서는 푸쉬오버해석을 통해 철근콘크리트 중간모멘트골조의 반응수정계수를 확인하기 위하여 5층 구조물을 KBC2009에 맞게 구조설계 하였다. 보 및 기둥 부재의 휨모멘트-곡률 관계는 화이버 모델로 확인하였으며 보-기둥 접합부 모멘트-회전각 관계는 Simple and Unified Joint Shear Behavior Model과 보-기둥 접합부 모멘트 평형관계를 이용하여 확인하였다. 푸쉬오버해석 결과 보-기둥 접합부 비탄성 전단거동을 무시하는 경우 구조물의 강도가 과대평가 되었다. 반응수정계수는 내진설계범주 C에 대하여 설계한 경우 평균 7.78, 내진설계범주 D에 대하여 설계한 경우 평균 3.64로 평가되었다.

• Structural Engineering and Mechanics
• /
• 제68권2호
• /
• pp.159-170
• /
• 2018

This paper aims to develop response modification factors for stiffness degrading structures by incorporating soil-structure interaction effects. A comprehensive parametric study is conducted to investigate the effects of key SSI parameters, natural period of vibration, ductility demand and hysteretic behavior on the response modification factor of soil-structure systems. The nonlinear dynamic response of 6300 soil-structure systems are studied under two ensembles of accelograms including 20 recorded and 7 synthetic ground motions. It is concluded that neglecting the stiffness degradation of structures can results in up to 22% underestimation of inelastic strength demands in soil-structure systems, leading to an unexpected high level of ductility demand in the structures located on soft soil. Nonlinear regression analyses are then performed to derive a simplified expression for estimating ductility-dependent response modification factors for stiffness degrading soil-structure systems. The adequacy of the proposed expression is investigated through sensitivity analyses on nonlinear soil-structure systems under seven synthetic spectrum compatible earthquake ground motions. A good agreement is observed between the results of the predicted and the target ductility demands, demonstrating the adequacy of the expression proposed in this study to estimate the inelastic demands of SSI systems with stiffness degrading structures. It is observed that the maximum differences between the target and average target ductility demands was 15%, which is considered acceptable for practical design purposes.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.433-438
• /
• 1998

Design lateral strength calculated by current seismic design code is prescribed to be much lower than the force level required for a structure to respond elastically during design level earthquake ground motion. Present procedures for calculating seismic design forces are based on the use of elastic spectra reduced by a strength reduction factor known as "response modification factor, R". This factor accounts for the inherent ductility, overstrength, redundancy, and damping of a structural system. This study considers ductility and overstrength of the wall-type structure for investigating R factor. This means that R factor is determined from the product of "ductility-based R factor($R_$\mu$$) and overstrength factor($R_s$). $R_$\mu$$ factor is calibrated to attain the targer ductility ratio (system ductility capacity) and produced in the from of $R_$\mu$$ spectra considering the influence of target ductility, natural period, and hysteretic model. On the other hand, $R_s$ is more difficult to quantify, since it depends on both material and system-dependent uncertain parameters. In this study Rs factor was determined from the result of push-over analysis.-over analysis.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.144-148
• /
• 2006

Kitchen space is one of the most dangerous places for the elderly. Modification of kitchen space for improving safety and independence for older residents is very important factor for aging -in-place. The purpose of this study wes to identify the current situation and modification of kitchen space by elderly-headed household. The sample included 108 respondents over the age 65 who consisted of elderly-couple or single person household with homeownership in Seoul. The data were analyzed by descriptive statistics. Based on the findings of the study, the present incidence and recognition of future need in kitchen modification were identified. Changes in kitchen space made tended to be nonstructural or relatively inexpensive items. In conclusion, this study suggests several ideas for improving current physical problems of kitchen space to support daily living of older residents.

• 한국강구조학회 논문집
• /
• 제22권3호
• /
• pp.229-239
• /
• 2010

새롭게 제안된 다이아그리드 구조 시스템은 경사진 기둥을 통해 구조물의 중력하중과 횡력을 모두 저항하는 시스템이다. 하지만 현재 내진설계 기준은 새로운 구조시스템에 대한 적절한 반응수정계수가 없다. 이에 새로운 시스템의 반응수정계수를 포함한 내진설계시 고려되는 내진성능계수들을 산정하기 위해 ATC-63(안)이 새롭게 제안되었다. ATC-63(안)에서는 구조 시스템의 여러 변수에 의해 다른 값을 가지게 되는 반응수정계수를 보완하기 위해 붕괴여유비를 함께 고려하여 건물의 내진성능을 판단한다. 본 논문에서는 4층에서 36층의 서로 다른 높이의 대각가 새 구조물을 설계하여 ATC-63(안)의 방법론에 따라 비선형정적해석과 동적해석을 통해 대각가새 구조의 내진성능계수를 평가하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.859-863
• /
• 2004

Structural Dynamics Modification is very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material property, changing shape of structure. In this research, using the surface grooving technique, shape of base structure was changed to improve its first natural frequency. Utilizing the result of sensitivity analysis, groove shape was formed gathering the many small embossing elements. For this process, Sensitivity Criterion Factor was introduced. To reduce its amount of calculation, the range of target area was restricted to their neighboring area and that result was very successful.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.159-165
• /
• 2002

Currently structural design of basement exterior wall is based on the assumption of boundary condition of plate, which may lead to erroneous results. In this study, the behavior of basement exterior wall subject to earth pressure and hydraulic pressure is investigated using linear finite element analysis. Parametric studies are conducted to investigate the variation of moment and shear force according to column-to-wall stiffness and aspect ratios. Using these numerical results, modification factors applicable to the design of basement exterior wall are presented. Design example is illustrated, showing satisfactory results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.826-829
• /
• 2004

Structural Dynamics Modification is very effective technique to improve structure's dynamic characteristics by adding or removing auxiliary structures, changing material property, changing shape of structure. In this research, using the surface grooving technique, shape of base structure was changed to improve its first natural frequency. Utilizing the result of frequency variation analysis, groove shape was formed gathering the many small embossing elements. For this process, Criterion Factor was introduced. To reduce its amount of calculation, the range of target area was restricted to their neighboring area and initial grooving point was selected using high-strain energy. This surface grooving technique was successfully applied to the HDD cover model.

• Structural Engineering and Mechanics
• /
• 제71권4호
• /
• pp.377-390
• /
• 2019

A method for estimating the floor response spectra (FRS) of elastic structures under earthquake excitations is proposed. The method is established based on a previously proposed direct estimation method for single degree of freedom systems, which generally overestimates the FRS of a structure, particularly in the resonance period range. A modification factor is introduced to modify the original method; the modification factor is expressed as a function of the period ratio and is determined through regression analysis on time history analysis results. Both real and artificial ground motions are considered in the analysis, and it is found that the modification factors obtained from the real and artificial ground motions are significantly different. This suggests that the effect of ground motion should be considered in the estimation of FRS. The modified FRS estimation method is further applied to a 10-story building structure, and it is verified that the proposed method can lead to a good estimation of FRS of multi-story buildings.

• 한국가스학회지
• /
• 제4권1호
• /
• pp.33-39
• /
• 2000

긴 표면균열을 갖는 알루미늄합금(A5083)의 평판을 사용하여, 균열관통후의 응력확대계수를 검토하였다. 짧은 표면균열의 관통후에 제안된 식에 의하여 긴 표면균열 관통시의 평가는 균열종횡비가 적을수록 오차가 크게 되므로, 진전거동을 정확하게 평가하기 위해서는 수정이 필요하였다. 따라서 긴 표면균열 관통시의 종횡비를 고려하여, 응력확대계수의 평가식을 수정함으로써 관통후 고정도의 해석이 가능하였다.