• Structural Engineering and Mechanics
• /
• v.83 no.4
• /
• pp.475-493
• /
• 2022

The results of research focusing on the experimental and numerical performance of ferrocement RC beams with openings reinforced with welded steel mesh, expanded steel mesh, fiber glass mesh, and polyethylene mesh independently are presented in this article. Casting and testing of fourteen reinforced concrete beams with dimensions of 200×100×2000 mm under concentric compression loadings were part of the research program. The type of reinforcing materials, the volume fraction of reinforcement, the number of mesh layers, and the number of stirrups are the major parameters that change. The main goal is to understand the impact of using new appealing materials in reinforcing RC beams with openings. Using ANSYS-16.0 Software, nonlinear finite element analysis (NLFEA) was used to demonstrate the behavior of composite RC beams with openings. A parametric study is also conducted to discuss the variables that can have the greatest impact on the mechanical behavior of the proposed model, such as the number of openings. The obtained experimental and numerical results demonstrated the FE simulations' acceptable accuracy in estimating experimental values. Furthermore, demonstrating that the strength gained of specimens reinforced with fiber glass meshes was reduced by approximately 38% when compared to specimens reinforced with expanded or welded steel meshes is significant. In addition, when compared to welded steel meshes, using expanded steel meshes in reinforcing RC beams with openings results in a 16 percent increase in strength. In general, when ferrocement beams with openings are tested under concentric loadings, they show higher-level ultimate loads and energy-absorbing capacity than traditional RC beams.

• Structural Engineering and Mechanics
• /
• v.86 no.6
• /
• pp.793-815
• /
• 2023

The current study looks at the experimental and numerical performance of ferrocement RC channel slabs reinforced with welded steel mesh, expanded steel mesh, and fiber glass mesh individually. Ten RC channel slabs with dimensions of 500 mm×40 mm×2500 mm were subjected to flexural loadings as part of the testing program. The type of reinforcing materials, the number of mesh layers, and the reinforcement volume fraction are the key parameters that can be changed. The main goal is to determine the impact of using new inventive materials to reinforce composite RC channel slabs. Using ANSYS -16.0 Software, nonlinear finite element analysis (NLFEA) was used to simulate the behavior of composite channel slabs. Parametric study is also demonstrated to identify variables that can have a significant impact on the model's mechanical behavior, such as changes in slab dimensions. The obtained experimental and numerical results indicated that FE simulations had acceptable accuracy in estimating experimental values. Also, it's significant to demonstrate that specimens reinforced with fiber glass meshes gained approximately 12% less strength than specimens reinforced with expanded or welded steel meshes. In addition, Welded steel meshes provide 24% increase in strength over expanded steel meshes when reinforcing RC channel slabs. In general, ferrocement specimens tested under flexural loadings outperform conventional reinforced concrete specimens in terms of ultimate loads and energy absorbing capacity.

• The Research Journal of the Costume Culture
• /
• v.16 no.5
• /
• pp.924-936
• /
• 2008

The purpose of this thesis is to discuss corsets that represent an undergarment that later became a popular outerwear. It discusses its forms and distinct characteristics to help create a unique fashion design and its execution. The scope of this study is limited to works from the 1990s to the present, and the materials for the literatures and exploratory study are fashion-related portfolios and the domestic and foreign fashion magazines. The results of this study are summarized as follows: The standard look of corsets in modern fashion can be classified into styles of glamour, revival, and dismantle. The materials used vary from traditional fabrics such as satin or lace to newly developed materials such as metal or glass. Its presentation can also differ in that it may be used as an accessory with additional details, as an outerwear, as an extra decorative layer, or as a revealing innerwear by open outerwear. Characteristics of these various looks of corsets are; first, it redefines the revival of the traditional corsets through introduction of its historic elements and its compromise. Second, glamorous and feminine images are maximized through drastic and direct exposure by using tight lacing, a waist nipper or garter belts that emphasize a woman's curve. Third, it represents borderless dismantlement through experimental and irregular images using unconventional materials, new execution techniques, or alteration from the standard forms.

• Journal of architectural history
• /
• v.9 no.3 s.24
• /
• pp.51-69
• /
• 2000

This study tries to analyze the development of architectural technologies appeared in several tall buildings and large spatial structures from 1955 to 1999 in Korea. We suppose that these buildings represent the development of technology in Korean modern architecture. By the detailed analysis of these buildings, we can arrive at a conclusion as such; During the years 1955-1999, there existed a great changement in the eighties. We can find this fact very well in the domain of structural system and curtain wall system. In large spatial structures, the structural-system of shell and steel truss dome was replaced by that of space frame, space truss and cable truss with membrane. In tall building, the structural system of rigid frame and shear wall was replaced by tubular system, core and outrigger system. Korean architects introduced the aluminum curtain wall in the sixties, but its low technological level caused many problems in reality. Therefore, precast concrete curtain wall appeared from seventies as the main method for an outer wall in tall building. With the augmentation of height after 1980, PC curtain wall was replaced by the aluminum curtain wall of unit type and structural glass wall system. These systems help to stress the transparency in a tall building.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.13 no.4
• /
• pp.69-76
• /
• 2013

As the energy consumed in building area has occupied a lot when looking into energy usage weights in area over the world, energy reduction building, eco-friendly architecture comes to the fore in the modern architecture. Discussions on the eco-friendly architecture have various concept definitions and targets to be achieved.The architectural works of Norman Foster are expressed as high-tech buildings using iron, glass, etc. in appearance, but they appear as those buildings with low energy load by analyzing environmental conditions from initial design stage that each building has, utilizing natural energy with design of outer shell and applying proper technical system. Thus, this study aims at providing basic data of outer shell planning through eco-friendly element technologies by considering pattern and outer shell design of buildings, principles of eco-friendly building plan as an eco-friendly building planning technique of Norman Foster as an example of plans to utilize building pattern, outer shell design and natural environments, in order to utilize passive measures as much as possible to increase energy saving methods and increase comfort by analyzing element technologies in the eco-friendly architecture in line with the modern flow.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.1
• /
• pp.9-18
• /
• 2015

The purpose of this study is to analyze the usage of eco-friendly elements in Korean traditional architecture to evaluate Hanok(Unjoru and Jinwondang) according to Green Building Certification Criteria(G-SEED). The results of this study were as follows; Unjoru and Jinwondang was not enough to obtain certification points. From Site usage and Traffic category, Jinwondang gets more points than Unjoru. It's because Jinwondang is located in downtown Seoul, so it gets more points of traffic and neighborhood facility. From Energy and Environmental Pollution category, Jinwondang gets more points of energy performance than Unjoru, too. It's because Jinwondang secured insulation performance of wall and windows using insulator and glass. From Resources category, Unjoru gets more points than Jinwondang. It shows that modern Hanok was limited using natural resources. From Ecological Environments category, Jinwondang is located urban area, it's difficult to secure the open space, so Unjoru gets more points than Jinwondang. If Modern Honok installs a system that can getting point and secure insulation performance, it will be certificated according to G-SEED.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.53-62
• /
• 1995

This research aims at proving the fact that the forms, spaces and many other design concepts of Modernism are much related with the changes of materials, struc-tures, and the way of construction as well as the idealis-tic and aesthestic things through the history of steel, one of the most important materials of the style. The meaning steel has in the modern architecture can be studied in the structure and industrial production system. 1) Steel frame broadened the range of understanding the space and created the new form through the skeleton/skin structure by reinterpreting the existing space fac-tors while it was being adopted to the architecture. Walls could be freed from the traditional function of bear-ing wall and roofs gave the transparancy to the interior by being linked with the glass. Posts lost the function which confines the space in the frame of the grid system and gave the flexibility to the interior due to the economical materials. These changes made the movable partition, screen with various materials and the system furniture which divides the space more important. 2) In the aspect of the industrialized architecture, it be-came the moment that the most of the archtectural com-posing parts were in mass production as they were standarized, high qualified, and generalized by the indus-trial characteristics of steel, and the specialization of structure and cladding, but the neither of the efforts to make the building itself by mass production or to standarize it was fulfilled. The high-tech architecture which borrows its archtectural manifestation from the high technology, however, is consistently paying efforts on such industrialization.

• Korean Institute of Interior Design Journal
• /
• v.20 no.6
• /
• pp.44-52
• /
• 2011

Louisiana Museum of Modern Art near Copenhagen is the most visited art museum in Denmark. It was originally founded by the director of the time, Knud W. Jensen and designed by two Danish architects, Vilhelm Wohlert and J${\o}$rgen Bo. The first part of the museum was built and opened to the public in 1958. The first part consisted of just a few exhibition spaces and glass corridors. But museum has been expanded step by step into a large park-like museum throughout 40 years of time. Louisiana museum has a unique environment in which art, architecture and nature are inter-related together. There was a very clear background for this museum atmosphere that was created by Knud W. Jensen from the very beginning. He wanted to make 'a sculptural park' or 'a low pavilion in the park'. The concept of 'park' was the key element. The architects, especially Vilhelm Wohlert who studied at the western area of the United States and influenced by the bay area architecture as well as the oriental wooden structure, interacted with the director's idea fully and made an invisible architecture in which 'Experience of Space' is the most important aspect. This thesis aims to analyze several crucial spaces of the museum and to find a hidden design characteristics. Chapter 2&3 explains general backgrounds and main design philosophy. Chapter 4 studies each parts' spatial experience and design methods with 3-dimensional diagrams. Chapter 5 tries to make an overall design characteristics that underlines the whole museum environment. The significance of Louisiana museum is not only in the fact that it is the most visited, but also in the fact that the role of architecture is to make a better environment where human and art are harmonized together within nature. The utopian idea of the founder started in doubt almost 50 years ago has been already successful in this small but vibrant park.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.1
• /
• pp.44-61
• /
• 2015

The research on the conservation of the movable modern and contemporary cultural heritage have been actively performed internationally since late 20th century. In this study, the international research trends of movable modern and contemporary cultural heritage conservation in last decades were analyzed. Setting up the range of the period, research papers were collected through various databases based on the systematic literature review process. Samples of 45 domestic papers and 505 foreign papers were classified by materials as books and paper, metals, textiles and fibers, photographs and audio-visuals, woods, plastics and ceramics and glass. The types of treated artifacts, detailed materials of the treated artifacts, and the research subjects were investigated from each paper. The data were compiled statistically and analyzed. Number of papers are published domestically in the book and paper conservation and metals conservation fields, but there are needs for more diversified artifact types and extensive research subjects. The researches in foreign countries are active in conservation of organic materials such as paper, textile and photographs and deal with various research subjects on not only treatment techniques and elemental analysis but also preventive conservation and conservation ethics. It is expected that this study would contribute to the field as a preliminary data on the conservation of modern and contemporary cultural heritage.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.193-196
• /
• 2006

The meaning of the color which has from modern interior space has played important role, i.e. color itself Is the concept creation tool as well as the unique expression sphere in field of interior space far away from fixed idea relevant to the existing color which was only simple decoration or secondary element in space. Thus, this current work expresses that the color is related with decoration effect as well as basic designed-conceptual work process including the space is formed. Furthermore, through the side-composition with color, It activates the various space aspect perceptually, which created the colorful environment in using lightning, reflection of glass and penetrated nature etc. The keyword on color concept is as like various aspects, third dimension, non-materiality and symbolical meaning. In addition, it provides the color space equipped with functionality and artistry capable to arouse the diverse sensual capacity to space users on default of color image language.